Search:

Type: Posts; User: morski

Page 1 of 5 1 2 3 4

Search: Search took 0.05 seconds.

  1. Replies
    11
    Views
    343

    I doubt you will be able to pin it out or...

    I doubt you will be able to pin it out or something as the sensor looks like a hall sensor or similar defo not a microswitch
  2. Replies
    11
    Views
    343

    You can buy the loom with the sensors on it but...

    You can buy the loom with the sensors on it but they are 50 per seat. but it needs to connect into the sensor, seat occ mat, belt buckle etc so you must have that partial loom already there but...
  3. Replies
    11
    Views
    343

    Take the sensors off the old seats and wire them...

    Take the sensors off the old seats and wire them back into the loom so the car knows they are there. Whether or not they will be looking for comparison values against its stored values is unknown
  4. Replies
    4
    Views
    316

    The thick D&W books were half full of scantily...

    The thick D&W books were half full of scantily clad girls !! lol
  5. If you have got these working can you update it...

    If you have got these working can you update it here for future reference for other users...
  6. This is the coding from my E-tron with LED...

    This is the coding from my E-tron with LED headlights:

    Address 55: Headlight Range (J745) Labels:* None
    Part No SW: 8V0 907 357 A HW: 7P6 907 357 B
    Component: MxB-ECU 001...
  7. Its missing the last letter on your old headlight...

    Its missing the last letter on your old headlight but as your in the UK we can assume its 'D' with PR code AV0 for 'driving on the Left' ! Letter C would be for driving on the right which is European...
  8. Nope... absolutely nothing... so far

    Nope... absolutely nothing... so far
  9. Audi have always used 2 different part numbers...

    Audi have always used 2 different part numbers for their headlights. The part number on the actual lamp assembly is always different to the one listed on ETKA. It does gon in when you enter it but...
  10. Replies
    4
    Views
    2,358

    A typical battery charger wont work.It cant...

    A typical battery charger wont work.It cant supply enough ampage to keep the control units alive. You need a battery support unit. I have a Ring rated at 50A and easily see 28A+ regularly being drawn...
  11. iirc Autoglass charge 250+vat to do an alignment...

    iirc Autoglass charge 250+vat to do an alignment and Audi charge 200+vat. There are others out there who might have the Hella system or Autel ADAS who can do it cheaper but worth ringing around.
  12. Which crash sensors have you replaced? They dont...

    Which crash sensors have you replaced? They dont need any coding and usually work straight out of the box unless they are cheap chinese crap then you can bang your head on a brick wall to no avail
  13. Replies
    5
    Views
    294

    Looks like you mechanic has not done the job...

    Looks like you mechanic has not done the job properly.The steering angle sensor needs calibrating for a start. You will need VCDS or a similar diagnostic tool to recalibrate the sensor. Not difficult...
  14. Thread: Battery

    by morski
    Replies
    24
    Views
    971

    A new battery might not be super cheap but they...

    A new battery might not be super cheap but they can be the magic pill to huge host of issues.
  15. Where's the first part of your scan? Is the...

    Where's the first part of your scan?

    Is the new module the exact same part number as your old one? Is the coding the same?
    Normally a new ecu would be a virgin unit with no coding at all but...
  16. Replies
    4
    Views
    249

    You can get the engine to start... Once you have...

    You can get the engine to start... Once you have have the power gauge on left showing ready press the accelerator to the floor and the engine will start. but as Uwe has stated the battery disconnect...
  17. Thread: Audi a3 8v

    by morski
    Replies
    8
    Views
    428

    Sorry...my sarcasm comes across as a bit strong...

    Sorry...my sarcasm comes across as a bit strong at times.. :D
  18. Thread: Audi a3 8v

    by morski
    Replies
    8
    Views
    428

    Yes, Audi sell bypass resistors. Just ask the...

    Yes, Audi sell bypass resistors. Just ask the parts department which airbag you want to bypass and they will supply you one. Steering airbag resistors are always in stock.
  19. Whats your transmission code?

    Whats your transmission code?
  20. Thread: Audi a3 8v

    by morski
    Replies
    8
    Views
    428

    Wow, you should put the car back together first,...

    Wow, you should put the car back together first, clear fault codes and then see what you have left.
    Airbag issue needs new bonnet actuators. These blow after a frontal impact and raise the bonnet...
  21. Replies
    16
    Views
    825

    Probably due to a mismatch of VIN' no's in the...

    Probably due to a mismatch of VIN' no's in the modules. You would need to go online and recode the modules with the correct VIn so they are all the same.
  22. Replies
    12
    Views
    7,318

    any particular vendor you recommend in china. pm...

    any particular vendor you recommend in china. pm if rules apply for posting here. thanks
  23. There is also another fuse apart from the 40A...

    There is also another fuse apart from the 40A one. Smaller one in the same rear fuse block. Really need to have a good look through the full wiring diagrams
  24. Check the main power cables that go to the...

    Check the main power cables that go to the compressor. The thick cables just by the compressor tend to burn out when there has been a leak due to excess current. There might be a few strands of cable...
  25. If its a 2014 My then you should be able to...

    If its a 2014 My then you should be able to access the engineering menu in the mmi and change the setting of the 'joker' button to something else. This should then change the menu in the mmi. I think
Results 1 to 25 of 112
Page 1 of 5 1 2 3 4