Search:

Type: Posts; User: Uwe

Page 1 of 20 1 2 3 4

Search: Search took 0.63 seconds.

  1. Getting help in this forum requires the use of a...

    Getting help in this forum requires the use of a legitimate VCDS system.

    They are available directly from us:
    https://store.ross-tech.com/shop/cat/VCDS

    ... Or from any of our authorized...
  2. Byte 9 does appear to have the possibility of...

    Byte 9 does appear to have the possibility of different start-up screens. Try values between what you have there now (00) and 0B. I would start with 01 and see what that does. Then 02, and so...
  3. Replies
    3
    Views
    55

    Getting help in this forum requires the use of a...

    Getting help in this forum requires the use of a legitimate VCDS system.

    They are available directly from us:
    https://store.ross-tech.com/shop/cat/VCDS

    ... Or from any of our authorized...
  4. Replies
    1
    Views
    43

    114 = 2 + 16 + 32 + 64. So "+032 = Headlight...

    114 = 2 + 16 + 32 + 64. So "+032 = Headlight Washer System active" is already active.

    Changing it to 115 would add "Speed Reset". I'm not sure exactly what that is.

    178 = 2 + 16 +32 +...
  5. I've split this out into its own thread from this...

    I've split this out into its own thread from this one.

    -Uwe-
  6. You're aware that "Address 77: Telephone" is the...

    You're aware that "Address 77: Telephone" is the "bluetooth module", right?

    -Uwe-
  7. Replies
    4
    Views
    66

    It could not hurt to post that Auto-Scan. I...

    It could not hurt to post that Auto-Scan. I understand there are no fault, but perhaps someone will spot something that's mis-configured.

    -Uwe-
  8. Replies
    18
    Views
    335

    Dana is not a gentleman. ;)...

    Dana is not a gentleman. ;)
    https://forums.ross-tech.com/member.php?7-Dana

    -Uwe-
  9. Replies
    1
    Views
    64

    Other modules have problems communicating with...

    Other modules have problems communicating with the ECU as well.

    If it were mine, the first thing I would do is unplug the ECU from the harness and inspect the connectors on both the harness...
  10. Replies
    6
    Views
    182

    Which one? -Uwe-

    Which one?

    -Uwe-
  11. Replies
    15
    Views
    1,879

    I do not think that "open circuit" can be...

    I do not think that "open circuit" can be "reset".

    -Uwe-
  12. Hmm... I don't see anything documented for that...

    Hmm... I don't see anything documented for that module.

    Take a look if this Adaptation channels 080 or 081 can be read in this module.

    -Uwe-
  13. Replies
    5
    Views
    142

    Not 100% certain but my guess would be Basic...

    Not 100% certain but my guess would be Basic Settings in Group 001.

    However, there's nothing in those scans that's indicative of any sort of problem with the flaps.

    -Uwe-
  14. If I had any sage words of wisdom here, I would...

    If I had any sage words of wisdom here, I would be happy to help you. ;)

    -Uwe-
  15. Replies
    17
    Views
    3,359

    So this car has an aftermarket intercooler, but...

    So this car has an aftermarket intercooler, but it isn't chipped? :confused:

    Please post an Auto-Scan and also the OBD-II Mode 9 data.

    -Uwe-
  16. Replies
    3
    Views
    63

    So all six fuel injectors have an "open circuit"...

    So all six fuel injectors have an "open circuit" fault. Have you got wiring diagrams for this engine? I'm confident one side (probably the low side) of each fuel injector goes to a pin on the...
  17. Replies
    5
    Views
    84

    Since the Rain/Light sensor doesn't show up as a...

    Since the Rain/Light sensor doesn't show up as a sub-system in your CECM, I think it is not codable.

    If you would like to try to eliminate it, subtract 8 from your CECM's coding. In other words,...
  18. Replies
    14
    Views
    214

    Auto-Scan, please? -Uwe-

    Auto-Scan, please?

    -Uwe-
  19. Replies
    3
    Views
    63

    Please post an Auto-Scan...

    Please post an Auto-Scan for context.

    -Uwe-
  20. Replies
    18
    Views
    335

    Just to be clear, is it this car?...

    Just to be clear, is it this car?
    https://forums.ross-tech.com/showthread.php?20240

    -Uwe-
  21. Replies
    6
    Views
    123

    If that corner is lowering, then there has to be...

    If that corner is lowering, then there has to be a leak somewhere.

    -Uwe-
  22. Replies
    5
    Views
    84

    I think it would be appropriate to post an...

    I think it would be appropriate to post an Auto-Scan so people can see the specifics, i.e. exactly how the vehicle is equipped and configured, and exactly what relevant faults it has.

    -Uwe-
  23. Thread: AUDI Q5

    by Uwe
    Replies
    3
    Views
    77

    Sounds like it's configure for "Selective...

    Sounds like it's configure for "Selective Unlocking". What happens if you "double click" the remote?

    -Uwe-
  24. Thread: AUDI Q5

    by Uwe
    Replies
    3
    Views
    77

    Moving to from General VW/Audi Repair to New...

    Moving to from General VW/Audi Repair to New Users section.

    -Uwe-
  25. Replies
    3
    Views
    67

    It's pretty difficult to tell whether that's...

    It's pretty difficult to tell whether that's suitable replacement for your existing gateway is if we don't know what your existing gateway is. So please post an Auto-Scan

    -Uwe-
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4