Search:

Type: Posts; User: AIB Wolfgang

Page 1 of 14 1 2 3 4

Search: Search took 0.05 seconds.

  1. Hello disconnect the optical bus on the sound...

    Hello
    disconnect the optical bus on the sound system and bridge with a "loopback" 4E0-973-802 for Most-Bus
    will bring you the best result
  2. Replies
    20
    Views
    576

    Hello As the user manual discribes...........

    Hello
    As the user manual discribes........
    Please connect your interface with the car and restart the "TEST"
  3. Replies
    7
    Views
    413

    uuih uuih, oopps,if that goes well!

    uuih uuih,
    oopps,if that goes well!
  4. Hello :thumbs: and just the correction of the...

    Hello

    :thumbs: and just the correction of the installation list in "19" gateway
    https://www.ross-tech.com/vcds/tour/installation-list.php
    in order of the car configuration.
  5. Replies
    11
    Views
    1,834

    "accept me only coding login 09555, coding04255...

    "accept me only coding login 09555, coding04255 but when i exit the abs module and re-enter abs it returns the coding to 00000."

    Reading the wiki is very helpfull!

    After login and coding switch...
  6. First, hello and welcome Second, as Uwe would...

    First, hello and welcome
    Second, as Uwe would write, please get verified
    Third, wrap your scan between code tags, it's better to read

    fourthly, while scratching my head for your 11 second engine...
  7. Replies
    17
    Views
    810

    so it seems there are no electrical failures who...

    so it seems there are no electrical failures who blocks the starting.
    Now it's necessary to switch looking for mechanical failures.
  8. Replies
    17
    Views
    810

    Hello Here is the reason: Freeze Frame: RPM:...

    Hello
    Here is the reason:
    Freeze Frame: RPM: 147 /min >> needs up to 300 and
    more than 10,5V battery voltage while starting.
  9. Uuuppps:D Sorry, bad translation. It looks...

    Uuuppps:D
    Sorry, bad translation.

    It looks like no clue will work as expected:thumbs:
  10. Hi David Looks like there is no tip working? I...

    Hi David
    Looks like there is no tip working?
    I would force a fault entry by disconnecting the cable for throttle body while ignition on.
    Then looking for the new entries, because of the Basic...
  11. Replies
    28
    Views
    979

    Hello Ben 11:03:27 Group 103 899.0C...

    Hello Ben
    11:03:27 Group 103
    899.0C Temperature Exhaust gas temperature after precatalyst bank 2
    Idling: 90 ... 270 C
    At full load: 490 ... 830 C Temperature too high sensor...
  12. Hello Sorry, but didn't find any coding with...

    Hello
    Sorry, but didn't find any coding with 0304A06 .
    Only numbers are used in this modules for coding:thumbs:
  13. Hello Coding should be changed from 00000001 to...

    Hello
    Coding should be changed from 00000001 to 00270518
    262144 Bedienungs- und Anzeigeeinheit hinten -E265 mit Ansteuerung der beheizbaren Sitze hinten
    8192 Heckscheibenrollo verbaut ...
  14. Hello First, Interface not compatible. Please...

    Hello
    First, Interface not compatible. Please upgrade to a current Ross-Tech interface and get verified.
    New interfaces like HEX-V2 provide extensive error information for such vehicles:thumbs:...
  15. Replies
    7
    Views
    181

    Hello Maybe that's the right way >...

    Hello

    Maybe that's the right way > https://erwin.volkswagen.de/erwin/showHome.do:thumbs:
  16. Hello "When steering wheel is straight ahead it...

    Hello
    "When steering wheel is straight ahead it reads about 12 degrees off "
    Yes, that's the fault.
    Wheels in straight position
    Steering wheel in straight position
    then the displayed angle...
  17. Hello Create auto-scan. Error in control unit...

    Hello

    Create auto-scan.
    Error in control unit 46.
    Door lock defective, microswitch for lock cylinder and lock switch defective, without function.
    Cable break to A-pillar
  18. Hello In addition of Dana's coding suggestion...

    Hello
    In addition of Dana's coding suggestion A14B600C49260000851406EA922000412118F02A (thank you Dana)
    I would give A14B600C49260000851406EA922000412118A02A a try . Correction of sensor type rear...
  19. Hello if you're confident alignment is OK, go...

    Hello

    if you're confident alignment is OK, go back to the garage
    - open 44 steering assist
    - advanced measurement values and check if steering angle is 0.0 degrees (or close to) with the...
  20. Hello If the steering angle sensor has been...

    Hello
    If the steering angle sensor has been installed correctly, then start the basic setting in the control unit 16.
    Steering wheel straight ahead in the direction of travel, sensor reading is at...
  21. Replies
    6
    Views
    219

    Hello Yes,...

    Hello
    Yes, http://wiki.ross-tech.com/wiki/index.php/ESP_System_Function_Test
    and if that doesn't work ABS module will be faulty.
    Time to check for Skoda recalls and / or change the unit
  22. Replies
    6
    Views
    219

    Hello Please just another auto-scan after this...

    Hello
    Please just another auto-scan after this test drive without deleting any codes, thank you
  23. Replies
    6
    Views
    219

    Hello Did you been...

    Hello
    Did you been here:http://wiki.ross-tech.com/wiki/index.php/01130 ?

    Special Notes: This Fault Code can only be cleared after performing a Test Drive above 20 km/h (13 mph).
    Good results
  24. Replies
    24
    Views
    1,197

    Hello friends of good taste I have just opened...

    Hello friends of good taste
    I have just opened the second one
    cheers

    https://www.veltins.de/sortiment/grevensteiner/
  25. Yes, Dana is right. 1T0 959 701 AF Z19 Window...

    Yes, Dana is right.

    1T0 959 701 AF Z19 Window Motor 229,00 €
    Vehicle smart original part.
    Order only with additional information.
    it's not enough to just have the same part number. Proper...
Results 1 to 25 of 337
Page 1 of 14 1 2 3 4