Search:

Type: Posts; User: minke

Search: Search took 0.01 seconds.

  1. Replies
    2
    Views
    1,457

    Audi A4 B9 MY16 Quattro Sport

    Hi,

    I've got a USB Micro-CAN and when I plug it into my new car and attempt to do a autoscan I'm getting an error saying 'Does the car support....'

    I then manually select A4 B9 range and I'm...
  2. Replies
    1
    Views
    837

    2012 Golf GTI (Mark6) Manual query

    Hi,

    My car has a gear selection suggestion (top right of the centre console display). It will either suggest I pick a shorter or taller gear based on throttle position and load. I've always...
  3. I've got the Ross-Tech VAGCOM tool. Is this...

    I've got the Ross-Tech VAGCOM tool. Is this enough ?
  4. Most definitely 98. In Australia you can get 91,...

    Most definitely 98. In Australia you can get 91, 95 and 98. the Golf GTI manual says minimum 95. I have only ever used 98 and 95% of fills are BP.
  5. Hello one and all - This is the response I've...

    Hello one and all - This is the response I've received from VAG regarding my issue. I don't believe it. Please comment if you have a reason to believe it's BS
  6. They felt the issue was fixed after installing a...

    They felt the issue was fixed after installing a new clutch switch. I just got the car back, still same issue.
  7. The dealer has had the car now for a solid 4...

    The dealer has had the car now for a solid 4 weeks. Prior to that I was to/from the dealer multiple times. As a guess they decided to replace the clutch switch. They're continuing to test however...
  8. Uwe - I see the value change instant based on me...

    Uwe - I see the value change instant based on me stepping onto the throttle pedal. Is that enough?
  9. Hi Rob, No I don't have is fixed yet. The car...

    Hi Rob,

    No I don't have is fixed yet. The car is going back to the dealer tomorrow and they're doing a live data gathering session with HQ. The tech is in the car with the laptop and the data is...
  10. Would you like for me to post it up now? The...

    Would you like for me to post it up now? The pre-data
  11. Monday (4 days time) VW are taking the car for an...

    Monday (4 days time) VW are taking the car for an extended period of time to solve this issue. Before it departs should I do anything with VCDS? Perhaps a before and after scan? Anything else?
  12. Thanks The tech didn't know the group numbers...

    Thanks

    The tech didn't know the group numbers but knew the G references. They agree that it isn't right but their only solution is to start swapping out parts (ECU, sensors etc...) to chase it...
  13. Measuring blocks 62 and 117 (of the G79 sensor)

    Hi Uwe,

    When the throttle pedal is not depressed at all I noticed the other day that 062 for the pedal position sensor (G79) measures 14.8 where as 117 shows 0 for G79

    Why the discrepancy?
    ...
  14. Hi - Thought I'd post a message. My car is off...

    Hi - Thought I'd post a message.

    My car is off to the dealer service department on Thursday. Any suggests? I have provided the information and plan to take a tech for a drive with the...
  15. Thanks Uwe. I wasn't able to get 008.1 (not...

    Thanks Uwe. I wasn't able to get 008.1 (not accepted when entering that value in the M Blocks field. However I did measure the following
    002 Injector
    062 Throttle pedal position and valve
    066...
  16. I've had a different thoughts. I need the...

    I've had a different thoughts. I need the manufacturer to take me seriously on this. The one way I think I can do that is show them that the car is 'supplying fuel' to the engine after I have lifted...
  17. Thanks for the ideas. Not being a guru with this...

    Thanks for the ideas. Not being a guru with this application yet, I'm struggling to find which M Block value to monitor idle switch?

    Also - what M-Block would show the application of the brake...
  18. Uwe - have you had any thoughts on what this...

    Uwe - have you had any thoughts on what this could possibly be? Should I do any other logging of any particular groups? Injectors? fuel pump?

    Not sure if it is related - but I also feel that...
  19. Thank you. Let me know if you want me to monitor...

    Thank you. Let me know if you want me to monitor any other groups and go for a drive....
  20. I'm sorry for the three posts in a row but wanted...

    I'm sorry for the three posts in a row but wanted to separate out what I can see.

    The above two posts have logs from separate runs/logging. I am assuming the time stamp is in seconds.

    When...
  21. Here is an example of releasing the throttle and...

    Here is an example of releasing the throttle and response is instant.



    Thursday,15,October,2015,19:06:37:06238-VCID:354FD7135C592896BE-8060,VCDS Version: Release 15.7.1 (x64),Data version:...
  22. Uwe - Thank you. What I've monitored thus far...

    Uwe - Thank you.

    What I've monitored thus far is throttle position (Group 62) and watched Sensor 2 (G185) which shows a value of 7.4% when I am not touching the pedal. While driving I can see...
  23. Yes - Re-seller in Australia. Ok I'll sort that...

    Yes - Re-seller in Australia. Ok I'll sort that out.

    With regards to measuring block group 062 - would there be anything else worth logging at the same time?
  24. Laggy response when releasing throttle 2.0T CCZ engine

    Hi,

    I'm happy to post my question here (or have it moved):

    I've just bought a cable to help me workout what is going on with my car. Three dealers are using the 'it's normal' canned response...
Results 1 to 24 of 24