Search:

Type: Posts; User: kczach

Search: Search took 0.01 seconds.

  1. Replies
    8
    Views
    234

    Is there not an option to turn off the high beam...

    Is there not an option to turn off the high beam assist in the MMI?
  2. Replies
    3
    Views
    295

    Here is what unchecking bit 27, byte 4 looks...

    Here is what unchecking bit 27, byte 4 looks like. Thoughts anyone?



    https://vimeo.com/330120621

    https://drive.google.com/file/d/1wpFY7sTssaDGgfgVDaoBIrE1es5aBj8f/view?usp=sharing
  3. Have you tried a different brand of LED bulb with...

    Have you tried a different brand of LED bulb with built in resistors? You might look on ECS tuning website or precision led.com I switched my previous S4 bulbs to LED from ecs tuning and never had...
  4. Replies
    3
    Views
    295

    Thanks for the response Uwe. Byte 3 bit 7 didn't...

    Thanks for the response Uwe. Byte 3 bit 7 didn't work. It still wants to wink. If someone wants a busy turn signal bit 27 byte 4 is the way to go. It alternates flashing yellow top led with the...
  5. Replies
    3
    Views
    295

    Turning off DRL winking in updated C7 S6

    Hi all,

    I have a 2017 S6. With the updated VAG-COM software there is now a long coding helper in module 9. I was looking to turn off the winking feature, however there are a lot of lighting...
  6. I did the video in motion on my previous 2011 S4....

    I did the video in motion on my previous 2011 S4. I used it once on a road trip and it was scary. Even on a quiet freeway you find yourself wanting to look at the screen and not focusing on the...
  7. Replies
    12
    Views
    878

    The only other thing that comes to mind is LED...

    The only other thing that comes to mind is LED brightness. If it is turned down below a certain threshold the LED's will not turn on. Usually you will get a bulb out warning though.
  8. I had a B8 S4 to get my sunroof to slide instead...

    I had a B8 S4 to get my sunroof to slide instead of tilt:

    go to 46 (cent conv) > Adapt. > Channel 61 > change value to 1755 > test > save.

    Make sure take note of your original value in case...
  9. With the soundaktor I hit the yes button and...

    With the soundaktor I hit the yes button and everything went well. It never hurts to take a screenshot of your coding before you change anything. I did notice that you couldn’t go all the way to...
Results 1 to 9 of 9