Search:

Type: Posts; User: 30secondgti

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Replies
    14
    Views
    11,644

    Nominal or normal? ;) Still seems a little...

    Nominal or normal? ;)


    Still seems a little off, but I think its as close as I'm going to get! (it seems when the car gets hot it goes a little past 92c, while the output test looks like its at...
  2. Replies
    14
    Views
    11,644

    ect and flange are genuine bosch parts. ...

    ect and flange are genuine bosch parts.

    everything looked clean. the old flange wasn't too dirty.

    yes g12 and proper coolant ratio.

    not sure about psi but the t stat seems to be opening and...
  3. Replies
    14
    Views
    11,644

    Yeah I understand. I did a test today. Watched...

    Yeah I understand. I did a test today. Watched the cluster gauge rise from a cold start while watching the digital reading on vagcom rise. It seems the cluster gauge only moves from 0 at around 50c...
  4. Replies
    14
    Views
    11,644

    88c (190f) to 97c (207f) is normal? I thought...

    88c (190f) to 97c (207f) is normal? I thought the car is supposed to stay around 90c (194f) plus or minus a few points. The spectrum i'm seeing through vagcom goes all the way up to 97c at times...
  5. Replies
    14
    Views
    11,644

    Engine measuring blocks (04) under coolant...

    Engine measuring blocks (04) under coolant temperature through Vagcom.

    Vagcoms readings are fluctuating between 88c and 97c as I've observed. Per what Uwe mentioned; at idle its lower in the...
  6. Replies
    14
    Views
    11,644

    no it doesn't. It goes to max then to 0. There is...

    no it doesn't. It goes to max then to 0. There is a way to try and go to 90c exactly. I'm just uncertain on how to do it. I've seen someone else do it before.
  7. Replies
    14
    Views
    11,644

    yeah understood. The cluster gauge is reading 91c...

    yeah understood. The cluster gauge is reading 91c to 93c and vcds measuring blocks have a fluctuating reading reading of 88c and 97c when the car has been running for a period of time.

    I tried...
  8. Replies
    14
    Views
    11,644

    coolant temperature cluster gauge test

    Hello,

    For some reason my temperature gauge on my 02' GTI is reading slightly above 90 celcius (canada). Looks like its at around 92c on the cluster gauge. Vagcom measuring block readings is...
  9. Jack, thought I'd throw you a message regarding...

    Jack, thought I'd throw you a message regarding the car and give and update. Wiring turned out to not be the problem. The monsoon deck appears to not be the problem either. We replaced throttle body...
  10. There is a wiring problem in the car. Replacing...

    There is a wiring problem in the car. Replacing wires.
    Different question;
    I installed a double din monsoon cd player from a 03' Passat (found it at a wrecker over a year ago). Part # 1JM 035...
  11. Hi, I did ask the dealer. I spoke to a guy there...

    Hi, I did ask the dealer. I spoke to a guy there that sounded like he had been on the job for about 3 hours. He did not convey any confidence with the information he was telling me. That is the...
  12. Looks like the ecu for my car is 06A 906 032 LP,...

    Looks like the ecu for my car is 06A 906 032 LP, but was originally born with an 06A 906 032 HS. I think the 'HS' version has been superseded by the 'LP'.
    :)
  13. Yes, we have the flashing tool. The stock flash...

    Yes, we have the flashing tool. The stock flash file was put back in (numerous times). What I was trying to say is that it doesn't matter. Once the ecu is flashed, it seems that it is never truly...
  14. Battery is fine. Can't ship the ecu's to you....

    Battery is fine. Can't ship the ecu's to you. sorry.

    Do you have info: If an LP ecu will work in my car. Are LP's & HS's & NK's & SK's interchangeable? (06A 906 032 ((HS, LP, NK, SK))

    thanks.
  15. Gentlemen, The last two ecu's I purchased and had...

    Gentlemen, The last two ecu's I purchased and had shipped from two different auto wreckers in North America have turned out to both be tuned with Revo Software (even though both wreckers assured us...
  16. A VW dealership local to me has indicated that my...

    A VW dealership local to me has indicated that my car was born with a part# 06A 906 032 HS ecu.

    We've been ordering the ecu's from the states with the part#.

    All ecu's have had fault codes but...
  17. one more burning question that is in my mind. Are...

    one more burning question that is in my mind. Are ecu's from the U.S and Canada interchangeable?

    Have been using ecu's from America in my car that was sold and spec'd for Canada.

    thx
  18. Hi Uwe, Understood. So perhaps its a...

    Hi Uwe,
    Understood. So perhaps its a cycle/process in how the ecu recognizes fault codes...?

    In chronological order:
    Reset all the fault codes - drive it for an hour - all the fault codes come...
  19. So I just had a look under the hood since I had...

    So I just had a look under the hood since I had some free time today. Looks like some of the hose clamps are Eurojet...

    Car is revving all by itself, fluctuating from 1000 rpms to about 180. Have...
  20. I'll update after we do the aforementioned...

    I'll update after we do the aforementioned diagnostics and tests
  21. What about that double ground on the battery?...

    What about that double ground on the battery? That really seems like over kill...

    Orion is really stepping up..?
  22. Well this is startling news I must say. I wonder...

    Well this is startling news I must say. I wonder why the previous owner put these no good clamps on...no wonder I could be running rich, perhaps a boost leak.

    Haha no comment on the...
  23. Where yah been?? usually its me that is MIA! ;) ...

    Where yah been?? usually its me that is MIA! ;)

    Thanks, it came that way from previous owner. I've also used some meguiar's shine on various parts of the bay.

    Type hose clamps or tight hose...
  24. Hey Jack, Did you see my pictures, did they...

    Hey Jack,

    Did you see my pictures, did they post properly?
  25. Okay, so I've gotten 5 pictures of the engine bay...

    Okay, so I've gotten 5 pictures of the engine bay outlinig a few areas. If further more detailed pictures are required, I am happy to get some more. Please let me know. Jack, please see my above...
Results 1 to 25 of 33
Page 1 of 2 1 2