Search:

Type: Posts; User: mkmagade

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Just to report back. Mine was resolved by...

    Just to report back. Mine was resolved by disconnecting the car's battery for about 4 hours (I was doing something else). When I reconnected the battery the cigarette lighter was working. So I...
  2. Just to report back... Saturday disconnected my...

    Just to report back... Saturday disconnected my car's battery for about 4 hours for something else and when I test the cigarette lighter it was working. Will test the other ports tomorrow....
  3. Hi OP, I am experiencing the same issue. How did...

    Hi OP, I am experiencing the same issue. How did you resolve yours?
  4. Okay, when I did an output test using VCDS all...

    Okay, when I did an output test using VCDS all sockets started working but when I removed the key from the ignition and tried again (with ignition on) they were dead/not working.. Now Im baffled...
  5. Audi A4 B8 cigarette lighter and 12.5V sockets not working

    Good day all

    My sockets suddenly stopped working. The first thing I thought of was "blown fuse". I checked and replaced 2 fuses even though they still looked ok but still my sockets aren't...
  6. Replies
    9
    Views
    775

    http://imgur.com/gallery/imIxGJb Trailer...

    http://imgur.com/gallery/imIxGJb

    Trailer module https://imgur.com/gallery/imIxGJb
  7. Replies
    9
    Views
    775

    The wiring is there not sure whether its...

    The wiring is there not sure whether its connected properly. Can you please tell me how to upload pictures from my phone? I want to show you guys what's there
  8. Replies
    9
    Views
    775

    Bought the car second hand so not sure. Its...

    Bought the car second hand so not sure. Its original though with Audi logo and all.
    All fuses are fine. There's a black box in the boot there I assume the trailer module. Not sure about the wiring.
  9. Replies
    9
    Views
    775

    No communication with trailer module

    Greetings
    Experiencing an issue. When I do a scan of the car I get a no communication with trailer module error and when I try to access the trailer module I get a no response from the controller...
  10. Replies
    9
    Views
    775

    No communication with trailer module

    Hi. Got a different issue this time. Auto scan still the same. I have a tow bar but I get an error when scanning. Error states that there's no communication with the module and when trying to access...
  11. Hi JoeB, did this work?

    Hi JoeB, did this work?
  12. Hi Mate. I read somewhere that the lights are not...

    Hi Mate. I read somewhere that the lights are not set to 13V (their full potential) so thought I could increase mine for more light. I think they are still fairly bright so no need to replace yet....
  13. Thanks. Was really hoping it was possible.

    Thanks. Was really hoping it was possible.
  14. @uwe I'd like to believe the battery charge...

    @uwe I'd like to believe the battery charge decreased from having the ignition on while doing some mods with the vcds. If possible, could you please assist with headlight brightness (not drl)...
  15. So I activated the battery meter on my radio....

    So I activated the battery meter on my radio. Seems to drop due to playing around with vcds while ignition and radio on. Drove the the car and battery meter was back on 100% will check if it drops...
  16. Thanks for the quick reply

    Thanks for the quick reply
  17. Can I remove component protection using VCDS?

    Just a question.
  18. Thanks mate :thumbs:

    Thanks mate :thumbs:
  19. Just a thought... Last time I had something...

    Just a thought... Last time I had something draining my battery it turned out to be my tracker. Maybe the device's battery needs replacement? Fortunately my contract expired and I will do a new...
  20. Replies
    81
    Views
    37,329

    Sticky: Correct. I sent them an email but they didn't...

    Correct. I sent them an email but they didn't know the cause of the error. They forwarded my details to Andy who seems to be working for Ross Tech. Andy hasn't gotten back to me yet.
  21. Replies
    81
    Views
    37,329

    Sticky: Hi, seems the port is blocked. Any way to resolve...

    Hi, seems the port is blocked. Any way to resolve it? I am unable to update the firmware. At work, it seems the port is blocked and at home, my Laptop just hangs while updating and I get the not...
  22. Unfortunately. Just ran the scan again after the...

    Unfortunately. Just ran the scan again after the drive and it seems to be the same result. I'll take the car for battery testing at a battery shop over the weekend.
  23. No, but I'm going to go for a drive now to see if...

    No, but I'm going to go for a drive now to see if there's any difference. Also, I don't go to work with the car so it's parked most of the week. Don't know whether that might influence the battery...
  24. Tuesday,17,July,2018,17:49:49:37139 VCDS...

    Tuesday,17,July,2018,17:49:49:37139
    VCDS Version: Release 18.2.1 (x64)
    Address 19: CAN Gateway
    Control Module Part Number: 8T0 907 468 M
    Component and/or Version: GW-BEM 5CAN ...
  25. That's odd. Changed the battery about 2/3 years...

    That's odd. Changed the battery about 2/3 years ago. Anyway to trace whether its the battery or alternator?
Results 1 to 25 of 30
Page 1 of 2 1 2