Search:

Type: Posts; User: iichel

Page 1 of 20 1 2 3 4

Search: Search took 0.09 seconds.

  1. Replies
    11
    Views
    264

    Ah okay, alles klar. Was ich meinte war ein Kabel...

    Ah okay, alles klar. Was ich meinte war ein Kabel innerhalb des Lenkrads (zwischen Lenkrad und Airbag). Dat gibt es ein kleinen Kabelbaum mit grossem gelben Stecker am Schleifring und kleinem...
  2. Replies
    11
    Views
    264

    Ok, because I see this: ...

    Ok, because I see this:

    https://i.ebayimg.com/images/g/2HgAAOSwEZdcwBrf/s-l400.jpg

    So you have the cruise control on the MFSW?

    So what I'm looking for is the grey wire, is it present?
    ...
  3. Replies
    11
    Views
    264

    So your engine is not happy with the newly fitted...

    So your engine is not happy with the newly fitted cruise control.
    Did you insert the pin into the engine ECU connector? Did it click? Is it in the right position?
    Did you change the airbag wiring...
  4. System function...

    System function test http://wiki.ross-tech.com/wiki/index.php/ESP_System_Function_Test
    Wiki http://wiki.ross-tech.com/wiki/index.php/VW_Golf_(1K)_Brake_Electronics_(MK60EC1%29
    Steering rack end...
  5. So, guessing time!...

    So, guessing time!
    113B200D092300FF880E04ED901F0042300000
  6. Replies
    3
    Views
    125

    could you have a look at the coding of the module...

    could you have a look at the coding of the module 16; perhaps cruise control is ticked yet not installed?
  7. Replies
    6
    Views
    222

    Because every distributor makes their own...

    Because every distributor makes their own translations of the available labels, and sometimes a bit more.
  8. Replies
    6
    Views
    222

    You can always use English and if your interface...

    You can always use English and if your interface is licensed for, let's say, Swedish, you can use that as well.
  9. Replies
    7
    Views
    201

    Can you show an autoscan please? See below

    Can you show an autoscan please? See below
  10. Good job! Sorry missed your message from...

    Good job! Sorry missed your message from yesterday.
  11. I'd suggest to open the cluster anyway and...

    I'd suggest to open the cluster anyway and inspect the light for any damage or tampering.
  12. wait a second... did you not connect a trailer?...

    wait a second... did you not connect a trailer? Because these 'smart' modules sometimes only output when there is a light (or other electrical load) detected and fully ignore the multimeter.
  13. You probably rotated the slip ring by one turn....

    You probably rotated the slip ring by one turn. Best to remove the steering wheel, center the slip ring, put back the steering wheel and do a basic setting of the during angle sensor
  14. Let's see some autoscan please first :)

    Let's see some autoscan please first :)
  15. Replies
    51
    Views
    993

    So could you please go to 19 can gateway,...

    So could you please go to 19 can gateway, installation list and tick 55 headlight range and save?
    Then go to applications, gateway installation list, clear all DTCs and make a new scan? :)
    Should...
  16. Replies
    51
    Views
    993

    Hi and welcome, hope you'll enjoy your stay here...

    Hi and welcome, hope you'll enjoy your stay here at the home of VCDS.

    Would you mind posting an autoscan? This way we can look along.
    Most of the answers to your questions regarding wiring will...
  17. In theory an oversized fuse can certainly damage...

    In theory an oversized fuse can certainly damage wiring, in theory.
    Please check the following fuses:
    - 8, 10, 11 and 41 on fuse holder C.
    However, I expect the fuses to be OK otherwise the module...
  18. I'll add that if there is a module not...

    I'll add that if there is a module not registered, it will complain at the top of your autoscan with "69-Trailer -- Status: Not registered 0001"
    On the other hand, if there is a module registered...
  19. Does the error return after you clear it?

    Does the error return after you clear it?
  20. you'll need to register it in the gateway. did...

    you'll need to register it in the gateway. did you do that?
    open 19 can gateway, installation list, tick 69 trailer, save, done.
  21. cheers buddy

    cheers buddy
  22. The second one you can clear, the first one needs...

    The second one you can clear, the first one needs a basic setting. Login - Enter 40168 - basic settings - basic setting (or whatever it's called)
  23. 13DD247d212600C7C81D246E845800800904

    13DD247d212600C7C81D246E845800800904
  24. Give this a try please: ...

    Give this a try please:

    13DD247d212600C7C81D246E845800800901
  25. does the engine start?

    does the engine start?
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4