Search:

Type: Posts; User: johndavidrichards

Search: Search took 0.01 seconds.

  1. Last night after reading your messages I ran...

    Last night after reading your messages I ran outside crawled under the car and took pictures of how I had mounted the rear sensors and compared them to some pictures I found online of them mounted...
  2. I'm going to dig into the rear sensors a bit. ...

    I'm going to dig into the rear sensors a bit. I'll get back to you guys.
    When I figure this out I'm going to write up the whole process including my bone head mistakes. :)
  3. Map and Measurements included

    Thanks for the help. I know this has got to be something simple that I'm missing.

    OK measurement for front axle Drivers and Pass are both 387 mm
    Rear axle Driver...
  4. Iíll take those measurements in the morning and...

    Iíll take those measurements in the morning and post the log.
  5. Ok latest update: (Parts installed 2 used rear...

    Ok latest update: (Parts installed 2 used rear leveling sensors, re-manufactured valve block, have a second leveling module that I tried) All struts are holding air and not bleeding down but now...
  6. Update. Today the emergency brake and leveling...

    Update. Today the emergency brake and leveling module arrived. I installed the emergency brake module first and low and behold it allowed me to access the leveling module. So security key was...
  7. Ok so I tried to access the leveling module with...

    Ok so I tried to access the leveling module with the emergency brake module unplugged (located under battery in trunk) Still no dice.
    looking at the VCS scan a little closer....it indicates an...
  8. Thanks I will try today. Just wanted to verify...

    Thanks I will try today. Just wanted to verify that I did also change out the parking brake switch on the MMI. Noticed that P-Brake works but the error message is still popping up in scan even...
  9. A8 D3 New Suspension Valve Block can't calibrate susp Module error 35 invalid key

    2004 Audi A8L
    Scanned using registered to me version of VCDS 1 of 10 VINS Used with Ross-Tech Cable.

    Background:
    Car was brought back from the dead (Copart) due to a sunroof leak. I had to...
Results 1 to 9 of 11