Search:

Type: Posts; User: sam1754

Page 1 of 5 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    11
    Views
    8,734

    Ok, no DTC but enabling byte 1 both bit 1 and 2...

    Ok, no DTC but enabling byte 1 both bit 1 and 2 is just impossible. It rejects the coding .
    When I return to VW mode, Service interval doesn't come back in 5F, even after resetting it.
    It's not so...
  2. According to this, we have MPC2 camera??? I...

    According to this, we have MPC2 camera???
    I prefer be mistaking this way:D
  3. Replies
    11
    Views
    8,734

    OK, this should allow VW+Audi functions then?...

    OK, this should allow VW+Audi functions then? There's no risk of malfunction? Some functions like ACC are different in VW or Audi mode... You're sure you have seen it yet, I can do it?
  4. Thanks for this excellent document. After reading...

    Thanks for this excellent document. After reading it, I say you're 100% right!
    In Luxembourg, I often see Audi's and Touareg's bi-LRR radars. So, all standard VW cars come with MRR radars and ACC up...
  5. Replies
    23
    Views
    10,774

    It's really near the original board. Just one...

    It's really near the original board. Just one thing I add is that the board should be non reflective. I printed it on a TIVEK sheet. It's important to avoid any parasitic lights.
    But it's really a...
  6. Replies
    11
    Views
    8,734

    Yes, I restarted the MIB. What do you mean by...

    Yes, I restarted the MIB.
    What do you mean by enabling bit 1 and 2? With long coding helper, I just have a menu to set VW/SEAT/SKODA or AUDI.
    Engine coding before changing: 01190032234405083000
  7. Replies
    11
    Views
    8,734

    I tested this tweak on my 2015 passat B8 and it's...

    I tested this tweak on my 2015 passat B8 and it's really nice. It set throttle and brake on sport mode without driving profil selection... but there some other bad changes!
    speed limiter is a little...
  8. That's what I thought. Those two lines are on my...

    That's what I thought.
    Those two lines are on my A5 adamap but not on your's.


    IDE07596-Personalization of lane dept. warning Cl. 15 on,activated ,1
    IDE10871-System mode: lane depart....
  9. So, WHAT WHAT WHAT!!! That's THE question!:D ...

    So, WHAT WHAT WHAT!!! That's THE question!:D

    I'll take time to check adaptations but first, I noticed you have enabled Lane assistant menu in 5F (no link with take off time) but that's why you...
  10. So, I ran an autoscan and there's no error, it's...

    So, I ran an autoscan and there's no error, it's the regulator that has to be changed... fifty euros... and half dash board to remove:D
  11. Thanks Symb, I think the time to take over the...

    Thanks Symb, I think the time to take over the steering wheel depend on A5 firmware version. Mine is very old!!!
  12. I don't have done it with my laptop so I'll do it...

    I don't have done it with my laptop so I'll do it again as soon as I can.
  13. It said no communication with controller...

    It said no communication with controller...
  14. Implement Climatronic module on 2007 POLO 9N

    Hello,
    A friend bought a 2007 Polo 9N with climatronic.
    He doesn't know much about this car and asked me why his climatronic didn't work. Blower is always at max speed and he can only control air...
  15. Thanks a lot! I'm really impatient to understand...

    Thanks a lot! I'm really impatient to understand what can makes differences.
  16. Ok, thanks for your reply. I wait for Symb adamap...

    Ok, thanks for your reply. I wait for Symb adamap because I'm curious but altogether, this menu is really unuseful...
    But it's still Symb-s post that made me start this retrofit. So I'm really...
  17. I don't remember where (it's a pity) I read that...

    I don't remember where (it's a pity) I read that warning intensity is only for steering wheel vibration intensity... right or wrong, I don't know but testing it seems to confirm it. But it's not...
  18. When I active lane assist menu in 5F adaptations,...

    When I active lane assist menu in 5F adaptations, All assistances menus appear.
    But after shutting down the ignition, only installed assistance still appear and full fonctionnal.

    I just tried...
  19. I also saw this:...

    I also saw this: ENG122227-ENG125816-Car_Function_Adaptations_Gen2-menu_display_Pedestrian_Assist_over_threshold_high,activated ,6
    I never activated it, it's also factory set... saw on my first...
  20. Yes, you have independant menu for Lane Departure...

    Yes, you have independant menu for Lane Departure Warning, Side Assist and Blind Spot (no menu, just function activation). That's what I understood.
    Thank you for the information, I didn't noticed...
  21. So, you've got the same camera and the menu is...

    So, you've got the same camera and the menu is functional.
    To make the menu appears, I had to enable the lane assist menu on 5F adaptation. As it's a package with side assist and blind spot, all is...
  22. I understand what you're saying and it seems to...

    I understand what you're saying and it seems to be right... but reading carefully is a hard tough for me, little french guy:p
    It's not really important to set it via menu but even when I put it on...
  23. It would be interesting that Symb tell us how he...

    It would be interesting that Symb tell us how he did.
    I didn't saw this menu on official vw's passat lane assist presentation and the other cars the dealer's lended to me (golf plus 2018 and tiguan...
  24. Ok for pedestrian detection. But for intensity...

    Ok for pedestrian detection.
    But for intensity warning, Symb said:

    And he has 3Q0 980 654 H camera... not 5Q0.
    Are you sure that it's a matter with camera type?
  25. So, I was so happy to enjoy lane assist that I...

    So, I was so happy to enjoy lane assist that I forgot a little thing.
    As you see in the menu, you can select weak...strong warning intensity. ...
Results 1 to 25 of 120
Page 1 of 5 1 2 3 4