Search:

Type: Posts; User: B5NUT

Search: Search took 0.01 seconds.

  1. Just to update this thread, first attempt a...

    Just to update this thread, first attempt a "Clear all DTCs" made no difference, however the second attempt cleared the fault on the gateway.

    Thanks for your help with this Uwe.
  2. When into each module and cleared the codes.

    When into each module and cleared the codes.
  3. Well cleared all the fault codes but the one of...

    Well cleared all the fault codes but the one of the 5F refuses to clear on the gateway:confused::confused:

    O well it's not causing any problems, and it's going into the dealer next week for an...
  4. Status: Malfunction 0010 but No fault code found.

    So scanned my car today and found a couple of faults, one of which is more than confusing! My gateway says the 5F module has a fault but when I check for a fault code there is none :confused:
    ...
  5. Sure. ...

    Sure.




    Wednesday,01,May,2019,18:12:22:07337
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 18.9.1.0 (x64) HEX-NET CB: 0.4437.4
    Data version: 20190114...
  6. A6 C7 MY2017 release parking brake with out seat belt on.

    I have an MY 2017 A6 C7, and was looking for the option in adaptation to be able to auto release the parking brake brake without having your seat belt on, as I sometimes have to move cars around on...
  7. Replies
    3
    Views
    2,897

    My have already found the answer it looks like...

    My have already found the answer it looks like it's in the immo control unit, so should be Ok changing both.
  8. Replies
    3
    Views
    2,897

    A6 4F Which module holds the VIN number?

    Not sure if anyone has the answer to this question, but here goes!

    My car is a 2006 Audi A6 4f, I'm going to change the can-gateway and instrument cluster. Both parts I'm fitting are from other...
  9. Replies
    9
    Views
    14,650

    Solution! So still have the problem where the...

    Solution! So still have the problem where the unit refuses the new coding in byte 14. So I purchased a 3G+ control panel that works with the faster baud rate.

    Once you have control of the MMI...
  10. Replies
    9
    Views
    14,650

    Thanks guy's but I've already tried all of the...

    Thanks guy's but I've already tried all of the above and it simply will not accept any value other than 0 in second digit of byte 14, the first digit will accept 0,1,2,3 & 4 after that all other...
  11. Replies
    69
    Views
    77,307

    You would get an optic error on the device you...

    You would get an optic error on the device you have it looped out, the loop cable is there to bypass a dead / faulty module. The fault on your MMI system is the dead AMP, it's not showing up in your...
  12. Replies
    9
    Views
    14,650

    That's what I set and it's refusing the coding....

    That's what I set and it's refusing the coding. The 5F module has an early firmware version, so I'm wondering if this function is only available in later versions.

    I have now connected up a 3G+...
  13. Replies
    8
    Views
    6,817

    Thanks will give them a call today.

    Thanks will give them a call today.
  14. Replies
    8
    Views
    6,817

    Can I also ask about how to buy one of these...

    Can I also ask about how to buy one of these cables, my old cord looked to have a break in it and could not be seen in device manager, I replace the USB cable but it's the standard plastic type cable...
  15. Replies
    9
    Views
    14,650

    Here is a full scan of the car. A little...

    Here is a full scan of the car.

    A little history, the car was MMI 2G and I retrofitted MMI 3G which has been working fine for the last 4 months, so I'm now upgrading to 3GP everything appears on...
  16. Replies
    9
    Views
    14,650

    MMI 3G+ 5F control panel baud rate coding

    I'm retrofitting 3GP into my C6 A6. I've got the unit installed and CP removed, I'm trying to change the baud rate on the 5F unit, so I can use the existing control panel.

    Reading this blog...
Results 1 to 16 of 16