Search:

Type: Posts; User: Carlos Martins

Search: Search took 0.22 seconds.

  1. Hello again After ABS module swap and...

    Hello again

    After ABS module swap and everything coded again, the error went away and all works as it should. Many thanks for all the help
  2. Before the catastrophic swap of instrument...

    Before the catastrophic swap of instrument cluster everything was fine regarding ABS
    When I changed to 050308, I couldn't perform G85 and had 2 problems with both rear ABS sensors. Then I changed...
  3. I don't have access to the car in this moment but...

    I don't have access to the car in this moment but I've called my friend to do that.
    However this error just come out after I've changed the ABS coding. All the errors wen't away and I was able to...
  4. Hi Your ABS coding did work. Many thanks. I...

    Hi

    Your ABS coding did work. Many thanks. I believe I'm going in the right direction with your precious help.

    However I get one error at ABS when 70km/h is reached and I don't understand why
    ...
  5. Unfortunatly I don't have ETKA anymore :(

    Unfortunatly I don't have ETKA anymore :(
  6. Yes the car has Park Assist (10). Could you...

    Yes the car has Park Assist (10). Could you advise how can i check if the ABS sensors are the correct ones?
    Because, before the swap all was working good.
  7. Dana, as far as I know the car was running fine...

    Dana, as far as I know the car was running fine untill my client/friend swap the cluster for one with color display with the part number 8U0 920 940H.
    Today mu friend told me that the engine was...
  8. Another try, another failure. :( Here is the...

    Another try, another failure. :(

    Here is the later autoscan:


    Friday,26,July,2019,19:01:57:16010
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86
    VCDS Version: 19.6.1.0
    Data...
  9. You are fantastic!

    You are fantastic!
  10. Thank you Dana you have been a great help. Later...

    Thank you Dana you have been a great help. Later tonight I will try your helpfull tips.
    However I have one doubt: After get the security access by code 50403, adaptation enabling, on Adaptation,...
  11. l already tried that coding but I don't know...

    l already tried that coding but I don't know where to start in order to erase all that errors.
    Performing G85 many times and always without success

    Do you have any clue please?

    Must I follow...
  12. It is the original one

    It is the original one
  13. Audi Q3 2.0 TDI, problems with ABS and ESP after odometer changed

    Hello

    I have original Ross Tech cable and yesterday I couldn’t put the correct coding of the module
    03: ABS Brakes, Part No SW: 5N0 614 109 AE, HW: 5N0 614 109 AE, Component: J104 C6 450M V4F3...
  14. Replies
    4
    Views
    4,177

    Thank you. I've sent one email to Carprog seller...

    Thank you. I've sent one email to Carprog seller to see if they can help me.

    What about the cruise control? Does it has something to do with the instrument cluster error?
  15. Replies
    4
    Views
    4,177

    Thank you Uwe The tools used were also...

    Thank you Uwe

    The tools used were also original. And they told me that i did the right procedure and maybe i could have something to do with the cruise control issue and the steering assist issue....
  16. Replies
    437
    Views
    177,567

    Sticky: Hello I bought one original cable Ross Tech...

    Hello

    I bought one original cable Ross Tech maybe 2 or 3 years ago on na UK forum (AudiSports i guess) but i've never registed it on Ross Tech:
    At work I can´t acess vídeos so I'll do it later in...
  17. Replies
    4
    Views
    4,177

    Vw Golf 5 (1K) dash ERROR

    Hello

    I’m new in this forum but I hope that I can help and be helped.


    I have a big problem with programming a new (used) cluster to a VW Golf V from 5/2005

    The old cluster showed error in...
Results 1 to 17 of 18