Search:

Type: Posts; User: yogibearal

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    39
    Views
    68,982

    http://forums.ross-tech.com/forumdisplay.php?45-Re...

    http://forums.ross-tech.com/forumdisplay.php?45-Reference-Scans-and-Maps-of-Non-Broken-Cars - Check here for your specific model. Lots of factory scans here.

    On My 2017 Passat I had to turn on...
  2. Replies
    39
    Views
    68,982

    http://forums.ross-tech.com/forumdisplay.php?45-Re...

    http://forums.ross-tech.com/forumdisplay.php?45-Reference-Scans-and-Maps-of-Non-Broken-Cars - Check here for your specific model. Lots of factory scans here.
  3. Eric, Thanks for the heads up. Was the update...

    Eric,

    Thanks for the heads up. Was the update done at the dealership? Just curious what it was for? My 2017 is going in for an update but my coding is different as it is a 20 byte long code. ...
  4. Not specific to this car but in general my...

    Not specific to this car but in general my experience with VAG is that just adding tiptronic steering usually just requires VAG-Coding - no extra wires - However the heated part may be problematic. ...
  5. I did the same on my sister in-laws 2014 Audi A4....

    I did the same on my sister in-laws 2014 Audi A4. There is a setting in the MMI that you also need to activate in order for the feature to work.

    Once you update with VCDS - a new menu will show...
  6. If you post a full scan and possibly adaptation...

    If you post a full scan and possibly adaptation map of installed modules, I think you will get more responses. Then folks will know what options are installed on the allroad.
  7. Eric, For the 2016 change code from 00348...

    Eric,

    For the 2016 change code from 00348 to 00448 - should do the trick to display gear in the MFD for D and S mode.
  8. OK I feel like a complete fool. Apparently I've...

    OK I feel like a complete fool. Apparently I've only used the Lane Assist check box in the MFD to turn it on/off (per owners manual). Apparently there is also a button at the end of the turn signal...
  9. BTW - I have tried clearing the DTC and it works...

    BTW - I have tried clearing the DTC and it works for about 20 seconds and then pops up the error message again.
  10. Lane Assist not currently available - 2017 Passat NMS

    So this last weekend I drove my Passat on the highway and turned on ACC and Lane Assist. When I did so, ACC kept on working but when I activated lane assist I got a message on the MFD that said...
  11. Replies
    3
    Views
    1,264

    Providing a full autoscan would help with...

    Providing a full autoscan would help with transmission type. I'm assuming yours is a S-tronic aka DSG, so not sure if it can be coded. Lets start with a full scan.
  12. Same here. I only use android auto now. No...

    Same here. I only use android auto now. No built in nav. Android auto has the lastest updated maps and entering and address or POI is much simple and can all be done via voice and takes traffic...
  13. csale8806 - Sent you a PM - but like UWE says a...

    csale8806 - Sent you a PM - but like UWE says a full autoscan would be helpful here. I'm 90+% sure of the answer, but would like to see the autoscan to be sure of the specific ABS module in your...
  14. Replies
    4
    Views
    1,858

    Maybe have your dealer readjust the camera...

    Maybe have your dealer readjust the camera alignment and calibration? I recently adjusted my DSR adaptation to see how it affected steering feel, so tested lane assist to ensure it is still working....
  15. Replies
    8
    Views
    2,539

    Yeap either way it would be good to post a full...

    Yeap either way it would be good to post a full scan so we know what vehicle you are referring to as they vary from year to year.

    Uwe, Oh great benevolent dictator ;) although Ross-Tech is not...
  16. As far as I know you can't change the...

    As far as I know you can't change the component/main firmware in control modules with VCDS, but there may be adaptations to change the DSR (Dynamic Steering Response) in this controller. Or DSR...
  17. Replies
    7
    Views
    2,202

    It does keep track of the changes in the Debug...

    It does keep track of the changes in the Debug folder, but yes its not internal. As it is, the data is exported and appended to CSV files, every session. If you have multiple versions of VCDS and...
  18. Replies
    7
    Views
    2,202

    Thanks for the quick response Uwe. Is there a...

    Thanks for the quick response Uwe. Is there a particular reason for not wanting to provide this functionality? I think it would be useful for many reasons. It doesn't seem like it would be...
  19. Replies
    7
    Views
    2,202

    Batch Coding/Flashing?

    Hi I hope this is the right place to put questions/suggestions for VCDS. And apologies if this has been asked before, I've done some searches but could not find any posts on this.

    Main Question:...
  20. LOL kind of a dupe of the other thread no? ...

    LOL kind of a dupe of the other thread no? http://forums.ross-tech.com/showthread.php?7395-Is-there-VCDS-coding-for-displaying-gear-in-D-mode-(NAR-models)&p=96136#post96136
  21. Replies
    7
    Views
    2,152

    Are you using error free CANBUS style LED bulbs...

    Are you using error free CANBUS style LED bulbs or LED with Resistors, or just regular LED's. In most cases using the right kind of bulbs will not throw the error codes. Rather not have to code for...
  22. I come from a software testing background (13+...

    I come from a software testing background (13+ years) and now am primarily in the technical PM profession. I need to do a bit of testing before I feel comfortable reporting specifics :P. I have...
  23. So I was playing around since I had a little time...

    So I was playing around since I had a little time to kill. At least on the 2017 Passat changing the following allowed actual gear to display, will be test driving it a bit to see if anything else...
  24. Replies
    4
    Views
    1,684

    I'm assuming you are trying to get rid of the...

    I'm assuming you are trying to get rid of the warning message at speed and allow changing settings like 2015 and older Passats. A Vortex member found a way to get around it. Unfortunately this has...
  25. So confirming we have checked the coding - There...

    So confirming we have checked the coding - There is a coding to say whether or not motorized folding mirror is installed. If we select that it is not installed, it will also disable the switch...
Results 1 to 25 of 43
Page 1 of 2 1 2