Search:

Type: Posts; User: martijn v o

Search: Search took 0.01 seconds.

  1. Replies
    31
    Views
    16,869

    sorry i canīt keep up.

    sorry i canīt keep up.
  2. Replies
    31
    Views
    16,869

    You have been busy lately :D

    You have been busy lately :D
  3. Replies
    10
    Views
    10,005

    All previous isses are solved when the correct...

    All previous isses are solved when the correct module is installed.
    Right 330 en left 329.
    clear all errors and perform a basic setting.
    The controller is communicating withe the...
  4. position wiring high beam from BCM to lights on...

    position wiring high beam from BCM to lights on position 11?
  5. If this is the same as the VW passat: First...

    If this is the same as the VW passat:

    First erase fault codes, then adjust headlights in 10- adaption. You have to install a levelsensor on the rear axle.
    Installed the xenon with pinning the new...
  6. Replies
    1
    Views
    1,393

    http://forums.ross-tech.com/showthread.php?962-Exc...

    http://forums.ross-tech.com/showthread.php?962-Excessive-Comm-errors

    Sorry i work at Google.
  7. Replies
    10
    Views
    10,005

    Solution found! Somebody else also wants to...

    Solution found!

    Somebody else also wants to retrofit bi xenon in his car. We met and tested his equipment on to my cables and AFS module.
    His equipment as well as my wiring seems to work fine.
    ...
  8. Replies
    10
    Views
    10,005

    Has somebody an idea which AFS modules (in the...

    Has somebody an idea which AFS modules (in the lamphousing) are exchangeable?

    headlightunits:

    driver (left side) 3C0-941-751-G module 7l6941229 x018
    Passenger side (right side)...
  9. Replies
    10
    Views
    10,005

    Thanks this is what i have used. Only forgotten...

    Thanks this is what i have used. Only forgotten to do the last wire to de AFS module: 6- L14 Right gas discharge (xenon) bulb > Bordnetz T11/2 11-pin connector, black AND T26/8 26-pin connector at...
  10. Replies
    3
    Views
    3,181

    The high beam works only when you pin the high...

    The high beam works only when you pin the high beam motor from the headlight on to the BCM (each headlight so 2 wires).
    The LED's also have to be code as DRL's into the same BCM module.
    The...
  11. Replies
    10
    Views
    10,005

    Thanks, i will check the wiring again. The codes...

    Thanks, i will check the wiring again.
    The codes are clear but i can not change coding due to the faults. First the both lights have to communicate with the AFS controller (behind the glove box).
    ...
  12. Replies
    10
    Views
    10,005

    Yes i did, worked with the electrical scheme from...

    Yes i did, worked with the electrical scheme from my type car (from Elsawin). Or do you mean that de inside of the lights are different?
    I light are working fine (ON/Off) and blinking with the...
  13. Replies
    10
    Views
    10,005

    passat B6 retrofit bi-xenon

    All,

    I have retrofitted bi-xenon in my car and it is not working properly at this moment.

    Car:
    B6, 2.0 TDI, front wheel drive, left hand drive, stationwagon, 2006 modelyear 2007.
    ...
  14. Replies
    24
    Views
    18,996

    Wednesday,08,July,2015,20:11:06:38406 VCDS --...

    Wednesday,08,July,2015,20:11:06:38406
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
    VCDS Version: 15.6.1.0 (x64)
    Data version: 20150612
    www.Ross-Tech.com


    VIN:...
  15. Replies
    5
    Views
    3,298

    Drive by, i will fix it for you :D ...

    Drive by, i will fix it for you :D
    ...
  16. Or make a switch inside interrupt the 12 Volts...

    Or make a switch inside interrupt the 12 Volts power to the unit.
  17. Replies
    15
    Views
    7,396

    :d .

    :d
    .
  18. Replies
    19
    Views
    11,443

    For testing if this retrofit is possible. ...

    For testing if this retrofit is possible.

    53-Parking break.
    Add one number to the existing coding and save. Go for a little drive. If there is an error 2844, the parking break module and ABS...
  19. Hi Dutchmen, That's not normal operation. I...

    Hi Dutchmen,
    That's not normal operation. I can't believe it is factory build this way.
    I had this once but this was with an after factory delivery build in cruise control.
    They fitted an...
  20. Replies
    27
    Views
    12,574

    No but gateway 19 does. If the gateway coding is...

    No but gateway 19 does.
    If the gateway coding is correct and the controller 16 is not responding there can be two causes:
    1- The can cables are not connected
    2- the controller is dead.

    You can...
  21. Replies
    4
    Views
    35,980

    There are many faults related to undervoltage, so...

    There are many faults related to undervoltage, so or you have disconnected the battery or the battery (or generator) are causing problems.
  22. Replies
    4
    Views
    4,503

    You mean this equipment:...

    You mean this equipment:
    -------------------------------------------------------------------------------
    Address 7D: Aux. Heat Labels: 1K0-963-235.lbl
    Part No SW: 1K0 963 235 E HW:...
  23. 40190AB8E85BF1C0400800C0710089EC4B7900AE672DA5F080...

    40190AB8E85BF1C0400800C0710089EC4B7900AE672DA5F08081C724A041

    I don't now from hidden bytes.
    I think if you copy the above code, it will be as before.
  24. Do you have a previous autoscan? There you can...

    Do you have a previous autoscan?

    There you can see de old coding, and you can program it back.
    I presume your talking aubout the central electrics module 09?

    Example:...
  25. Do you have a previous autoscan? There you can...

    Do you have a previous autoscan?

    There you can see de old coding, and you can program it back.
Results 1 to 25 of 25