Search:

Type: Posts; User: Sebstar

Search: Search took 0.00 seconds.

  1. I turnt Bit 6 now off. I try the next time...

    I turnt Bit 6 now off.

    I try the next time with A8 in Byte 29. For now it work.

    Is These Label file for Vcds? Can i use These dicekt during coding? And how to get it?
  2. Ok if you have That Same ABS and coding. Than i...

    Ok if you have That Same ABS and coding. Than i am sure That awv work in Situation.
  3. Ok and you have also Facelift acc Sensor and the...

    Ok and you have also Facelift acc Sensor and the Same abs like mine?

    Than it changed to the FL.
  4. Today i tested the shock/spot brake function if...

    Today i tested the shock/spot brake function if no reaction in Lane Assist mode. That works great.
    But about ABS prefill during AWV PreSense for to close distance, i don't can tell something. I had...
  5. The change in ABS was done during remote session...

    The change in ABS was done during remote session of Activated the ACC
  6. Coding is done. No Fault. looks good. Tomorrow...

    Coding is done. No Fault. looks good.

    Tomorrow i test it and give an info.

    AnhalteWegVerkürzung in german it make sence for me :p
  7. Monday,30,December,2019,19:09:07:27865 VCDS --...

    Monday,30,December,2019,19:09:07:27865
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
    VCDS Version: 19.6.2.0 (x64) HEX-V2 CB: 0.4508.4
    Data version: 20190930 DS308.0...
  8. ok 5 minutes

    ok 5 minutes
  9. both retrofitted

    both retrofitted
  10. it ist called front assist. the acc sensor...

    it ist called front assist.
    the acc sensor detect an car much slower the you. then you got an message in the cluster attention. the abs profile the brake for much harder brake than normal and short...
  11. Hii, Job done. The new ABS is installed....

    Hii,

    Job done. The new ABS is installed. Everything works perfect. Coding is 1to1 the same.
    Fluid change was really easy and with no trouble. I started in the Front with both sides parallel then...
  12. ok, i let you know. but good to know that you...

    ok, i let you know. but good to know that you start first with Vcds.
  13. yes, the tire speed standard stuff. not the...

    yes, the tire speed standard stuff.
    not the preassure system.

    I wondering that these ist two times there and "display". it looks like that the ABS search the rest of preassure measure system. hmm...
  14. One more question. Today I bring the ABS Modul...

    One more question.
    Today I bring the ABS Modul in position near to the old BAS Modul. In a Diesel version normally you have to let down the engine.
    But I try it from the downside to bring it in...
  15. Ok. Thanks. I give an info after installation. ...

    Ok. Thanks.
    I give an info after installation.

    best regards
  16. So what you think? Is it possible that an 1to1...

    So what you think?
    Is it possible that an 1to1 coding will work in this case?
  17. 3Q0 907 379 G so it called both MK100IPB is the...

    3Q0 907 379 G
    so it called both MK100IPB
    is the one I want to install. this was installed at end of 2015


    Adresse 03: Bremsenelektronik (J104) Labeldatei: 5Q0-907-379-IPB-V1.clb
    ...
  18. Hi, thanks at first for fast answering @downtime...

    Hi, thanks at first for fast answering @downtime

    Yes is see this list and the file. Good job. But for me I don't see any issues that ist something to change.
    That's the reason for that post...
  19. Project retrofit from MK100 5Q0 ABS to newer MK100 3Q0 ABS

    Hi,
    that is my main Project at the moment.
    I musst change to an newer ABS/ESP because of Stop&Go function don't work with the newer FL ACC Sensor and the older 5Q0 ABS together.
    Car: A3 8v,...
Results 1 to 19 of 19