Search:

Type: Posts; User: MartinsX

Page 1 of 20 1 2 3 4

Search: Search took 0.11 seconds.

  1. Original coding/adaptation channel values before...

    Original coding/adaptation channel values before tweak attempts? Autoscan from state before?
    What values, channels were changed? What happens if everything is reverted back to original state?
    P.S....
  2. Hi and welcome! First of all post full unedited...

    Hi and welcome!
    First of all post full unedited autoscan, in [code] tags would be excellent.
    Second - why did You replace old module? What was wrong with it?
  3. If You still can get VIN from donor car, WD in...

    If You still can get VIN from donor car, WD in Erwin by this VIN should be correct for Your parts set ;)
  4. Did You get from junkyard complete set, all parts...

    Did You get from junkyard complete set, all parts removed from one car? (Mechanical parts, control module and wiring loom)?
  5. I'd like to hear explanation how power supply...

    I'd like to hear explanation how power supply tests are done, too.
    + do the 30 and 15 stays on when attempting to start (measurements at respective terminals at some of modules that are not...
  6. Replies
    11
    Views
    268

    I have a feeling that You have not enough...

    I have a feeling that You have not enough knowledge and some tools are missing, too (not all operations - relatively simple, but absolutely necessary to get Your car running again - can be done with...
  7. Where did You got Your cable? Can You post a...

    Where did You got Your cable? Can You post a picture of it?
  8. Replies
    9
    Views
    243

    In this model immo does not affect starter...

    In this model immo does not affect starter control.
    Check starter, wiring to it, IGN switch terminal 50.
  9. Replies
    9
    Views
    243

    Car does not crank or cranks but does not start?

    Car does not crank or cranks but does not start?
  10. Replies
    17
    Views
    430

    We need full unedited autoscan...

    We need full unedited autoscan.
  11. Post an autoscan, please. The best is one with...

    Post an autoscan, please. The best is one with old and another one with replacement rack installed.
  12. Do this car have a battery isolation device?...

    Do this car have a battery isolation device? (Part of airbag system that disconnects battery when crash happens) Is it alive after short circuit?
  13. Replies
    14
    Views
    219

    There may be some reason but it does not fit in...

    There may be some reason but it does not fit in this topic and I will start a new one when I got enough data collected.
  14. I'm suspicious for the same ;) P.S. I started to...

    I'm suspicious for the same ;)
    P.S. I started to write my previous post 2 hours ago, but posted it just now, when finally got my younger son asleep his noon time sleeping :D
  15. This looks better now. Anyway I have a feeling...

    This looks better now.
    Anyway I have a feeling that Right Front sensor is at error all the time as it shows 50% in MVB 003.2 and Error in MVB 032.2 in all 3 maps. First 2 are on not level surface,...
  16. Replies
    11
    Views
    268

    If You sent only ECU to tuner for immo-off, it...

    If You sent only ECU to tuner for immo-off, it couldn't affect cluster. It died by itself according info You provided in post #1. They use to do like this time by time.
    Tuner must return Your money...
  17. Or wait for someone from RT to chime in with...

    Or wait for someone from RT to chime in with some, at least experimental, version of label file for Your 8K0 907 364 module.
  18. Replies
    1
    Views
    76

    Post an autoscan to let us know what car You have...

    Post an autoscan to let us know what car You have and how it is equipped.
  19. Ok, in this case map from 0x55 is useless as this...

    Ok, in this case map from 0x55 is useless as this module use values from 0x14 via CAN. Sorry for asking You to make this map.
    To move forward we need to get raw values from level sensors. Logically...
  20. Replies
    11
    Views
    268

    As for this model 0x17 and 0x19 are physically...

    As for this model 0x17 and 0x19 are physically one module, it may or may not be true. In first scan IPC is bad - corrupted EEPROM content and/or MCU/flash content.
    In second scan all comm DTC's are...
  21. Looks like my guess was not correct. Can You...

    Looks like my guess was not correct.
    Can You make a MVB map from module 55?
  22. Looks like VCDS doesn't have label file for this...

    Looks like VCDS doesn't have label file for this module.
    This module uses classic MVB instead of Advanced measuring values.
    My guess is group 32 contains level sensor measurements.

    32,21.00 %,...
  23. Check camshafts. They use to get twisted or some...

    Check camshafts. They use to get twisted or some cams mowed away from original positions/angles after chain failure.
  24. Replies
    4
    Views
    186

    I'm not sure, as OP now have 7N0 963 271 A...

    I'm not sure, as OP now have 7N0 963 271 A according his autoscan.

    Address 18: Aux. Heat Labels: 1K0-815-071.clb
    Part No: 7N0 963 271 A
    Component: Zuheizer 051 2630
    ...
  25. You have to have seat belt on, start grinding in...

    You have to have seat belt on, start grinding in procedure and drive a remaining distance showed here:

    IDE05179-IDE05273 Grinding-in mode-Remaining grinding-in distance 222.2 m
    Procedure must...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4