Search:

Type: Posts; User: dpasquazzo

Search: Search took 0.01 seconds.

  1. Audi 2012 A4 3.2L 8T0 overheating & late start, after timing chain adjustment

    Dears,
    Was wondering if you could help on thos issues: A4 engine was removed and oil leaks repaired.. once fixed back (timing were removed as well), we noticed no codes but engine overheating 110...
  2. Replies
    14
    Views
    314

    step by step.. lots of errors but not I got back...

    step by step.. lots of errors but not I got back the control from steering but I lost the gearbox, it is not changing by itself ,-(



    Wednesday,02,October,2019,20:46:09:57315
    VCDS -- Windows...
  3. Replies
    14
    Views
    314

    I don't really understand the next step now.. I...

    I don't really understand the next step now..
    I need to tick all the boxes in the long coding ? select all the relevant options ?

    then I have a number 0000BF

    and I will enter this code with...
  4. Replies
    14
    Views
    314

    OLD POST on same issue...

    OLD POST on same issue

    old coding as per this post is 0000FF

    could you please advise if I should use the old coding of this newly suggested (using longcoding help)???
  5. Replies
    14
    Views
    314

    here the lastest reset ...

    here the lastest reset



    Tuesday,01,October,2019,17:48:38:57315
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 19.6.2.0 (x64) HEX-NET CB: 0.4505.4
    Data...
  6. Replies
    14
    Views
    314

    ok I did the procedure successfully.. still...

    ok I did the procedure successfully.. still incorrect modult coding is there>
    I open the long coding :
    rear wiper [ok]
    board computer installer [ok]
    bit 2-3 Adaptive Cruise control ACC [0C I...
  7. Replies
    14
    Views
    314

    any update on the coding for the steering angle ?...

    any update on the coding for the steering angle ?
    Regards
  8. Replies
    14
    Views
    314

    I reset all codes once more : ...

    I reset all codes once more :



    Thursday,26,September,2019,16:45:45:57315
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 19.6.1.0 (x64) HEX-NET CB: 0.4505.4...
  9. Replies
    14
    Views
    314

    here the latest: ...

    here the latest:



    Thursday,26,September,2019,16:37:59:57315
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 19.6.1.0 (x64) HEX-NET CB: 0.4505.4
    Data version:...
  10. Replies
    14
    Views
    314

    Audi Q5 2012 - Angle Steering Coding

    Dears,

    I replaced the faulty angle steering and would like your support to code the new one. already installed, the functions such as shifting and sound are not working.



    Address 16:...
  11. Yes dear, it comes back as soon as s reset all...

    Yes dear, it comes back as soon as s reset all codes. I didn't remove anything but maybe dealership did as I got it out of the dealership, second hand fresh purchased..
  12. The dealership recommend to change the...

    The dealership recommend to change the mechatronic...and 2 litters of gearbox oil. I am thinking maybe it is a harness fault.
    What is the part i need to search for ? ebay..second hand what will be...
  13. sure ...

    sure



    Monday,16,September,2019,16:56:05:57315
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8.1 x64
    VCDS Version: 19.6.1.0 (x64) HEX-NET CB: 0.4505.4
    Data version: 20190529...
  14. VIN: WVWAC2135AV431700 Scan: 01 02 03 08 09 10 15...

    VIN: WVWAC2135AV431700 Scan: 01 02 03 08 09 10 15 16 17 19 25 42 44 46 4F 52 55 56 77 VIN: WVWAC2135AV431700 01-Engine -- Status: Malfunction 0010 02-Auto Trans -- Status: Communication Error 1010...
  15. VW Scirocco 1.4L 7speed gearbox slipping

    Dear,

    I would like your help in the troubleshooting of the following code for that gearbox:

    Address 02: Auto Trans Labels: 0AM-927-769.clb
    Part No SW: 0AM 300 048 N
    HW: 0AM927769D ...
  16. Dear Here the picture of the clock spring. I...

    Dear

    Here the picture of the clock spring.
    I want to replace 8K0953568M (2013) with 8K0953568F (2011). Could you please assist me with the coding of this new unit ?

    Regards,
    Dimitri
  17. Appreciated your precious help in my firsts steps...

    Appreciated your precious help in my firsts steps of coding.. Well, with my typical beginner luck, alhamdulilla, I found out a code accepted 027500 (still errors are there and same dashboard lights):...
  18. Wednesday,26,June,2019,21:58:20:57315 VCDS --...

    Wednesday,26,June,2019,21:58:20:57315
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 19.6.0.6 (x64) HEX-NET CB: 0.4505.4
    Data version: 20190529 DS308.0...
  19. Wednesday,26,June,2019,21:51:49:57315 VCDS --...

    Wednesday,26,June,2019,21:51:49:57315
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 19.6.0.6 (x64) HEX-NET CB: 0.4505.4
    Data version: 20190529 DS308.0...
  20. VIN: WA1CFCFP7DA018393 License Plate: ...

    VIN: WA1CFCFP7DA018393 License Plate:
    Millage: 64400 km

    Sunday,26,August,2018,18:32:31:57315

    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8.1 x64

    VCDS Version: 17.8.1.0...
  21. Coding of ABS pump, Electric Steering on AUDI Q5 s-line 2012

    Dears,

    I have installed new ABS pump and steering on my Q5 but I cant access where to code the new items.
    breaks and steering is perfectly functioning , car runs fine for 1000km so far but all...
Results 1 to 21 of 21