Search:

Type: Posts; User: n4s

Search: Search took 0.01 seconds.

  1. Replies
    22
    Views
    806

    If your engine doens't accept FTS option, only...

    If your engine doens't accept FTS option, only ACC option, check if you have any FTS option active and disable it.
  2. I checked in my car and I don't have that option...

    I checked in my car and I don't have that option in output tests :(
  3. Thanks again!!! I saw your links and probably...

    Thanks again!!!

    I saw your links and probably found what I need
    "After you finish all the coding mentioned in my post #8 go to OutputTest and run Control_Supply_Voltage_VIP. VCDS will not show...
  4. thank you! for your help. I'm using the same...

    thank you! for your help.

    I'm using the same unit and I have the following error, did you had same?

    Address 05: Acc/Start Auth. (J518) Labels:* None
    Part No SW: 5K0 959 434 K HW:...
  5. Replies
    17
    Views
    488

    For 5K0 BCMs, when you do changes in EEPROM, byte...

    For 5K0 BCMs, when you do changes in EEPROM, byte 18 change to 00
    For 1K0 BCMs, when you do changes in EEPROM, byte 18 don't change, if you wan't to view your changes you have to change to 00...
  6. Replies
    58
    Views
    3,170

    My radar is HW036 Address 13: Auto Dist. Reg ...

    My radar is HW036

    Address 13: Auto Dist. Reg Labels: 3AA-907-567.clb
    Part No SW: 3AA 907 567 A HW: 3AA 907 567
    Component: AC201 RDW A 036 0170

    I also would say to use...
  7. I want to be prepared for Virtual pedal...

    I want to be prepared for Virtual pedal installation and it would be great if I could have adaptation map to compare with mine. I haven't installed the system yet, only the Kessy module with VIP.
  8. Replies
    19
    Views
    1,145

    You have Simos ECU. I don't believe that ECU is...

    You have Simos ECU. I don't believe that ECU is prepared for ACC.
    Me and a friend, we found how to enable ACC in Bosch ECUs 2 years ago. I have a 2009 Tiguan with ACC.
    We also studied some 1.6 TDI...
  9. It's the Easy Open of boot....

    It's the Easy Open of boot.
    https://www.youtube.com/watch?v=f2Li28zsjKY

    To have it's necessary Kessy module with VIP.

    The car in the link has that, you can see the Slave module....
  10. Need adaptation map from Passat US with Virtual Pedal

    Hello,

    I would like to retrofit virtual pedal and would like to compare my adaptation map with one from Passat US. Passat US has PQ35 Kessy module, like my car.

    Address 05: Acc/Start Auth....
  11. Replies
    10
    Views
    590

    Thank you Sebastian!!!

    Thank you Sebastian!!!
  12. Replies
    10
    Views
    590

    I was not aware, I thought it would work with any...

    I was not aware, I thought it would work with any language. No problem.
  13. Replies
    10
    Views
    590

    That is really interesting. Have to download that...

    That is really interesting. Have to download that version.
  14. Replies
    6
    Views
    330

    it was probalby me that posted that, even if it...

    it was probalby me that posted that, even if it was my friend Dmitry that found it. If you ABS was a C6 I would have provided that info but itsn't.

    Even if I'm not the biggest expert, my 2009...
  15. Replies
    10
    Views
    590

    thanks Uwe So will you be able to update it?...

    thanks Uwe

    So will you be able to update it? This file is used by many PQ35 cars, so it's quite usefull.
  16. Replies
    6
    Views
    330

    That car is quite similar to mine, I have a 2009...

    That car is quite similar to mine, I have a 2009 Tiguan, just a little older.

    My original coding was 11554 and your current one is 15660. From what I have seen in the past, I would suspect, the...
  17. Replies
    10
    Views
    590

    German Labels and English Labels

    During discussion with friend, while helping in kessy retrofit, I had to use some inputs from other tool (VCP) to code the BCM.
    This BCM
    Address 09: Cent. Elect. (J519) Labels:....
  18. The base coding for engine 2.0 TDI, FWD and...

    The base coding for engine 2.0 TDI, FWD and Manual transmission, is 1083
    if car has start stop, 32768 should be added.
    If car has PLA 256 should be added.
    if car has indirect TPMS 4096 should be...
  19. Replies
    425
    Views
    165,826

    Sticky: Thanks Uwe. I joined before because I had a...

    Thanks Uwe. I joined before because I had a Hex-Can.
  20. Replies
    425
    Views
    165,826

    Sticky: Hi, I'm not able to write in the forum. I have...

    Hi,

    I'm not able to write in the forum. I have Hex-V2.

    Thanks,
    Ruben
Results 1 to 20 of 21