Problem Solved ,
It was needed to change the RIGHT SIDE, cold / heat SERVOMOTOR !!!
The old servomotor have usure on the case in the contact area of the gear that operated the flap, and due to...
Type: Posts; User: @DRI@N
Problem Solved ,
It was needed to change the RIGHT SIDE, cold / heat SERVOMOTOR !!!
The old servomotor have usure on the case in the contact area of the gear that operated the flap, and due to...
Yes I clear the errors, I made the FLAP END adaptation basic settings, but the errors reappear !!!
My problem is I don't know what SERVOMOTOR to buy to replace it !!!
@Bruce.
I don't have...
Hello,
I have this errors on CLIMATRONIC but I don't find anything on ross-tech fault codes list !!!
Is possible to explain me what SERVOMOTOR is broken because on the RIGHT SIDE I have no heat ....
Hy frends,
Yesterday I installed on my Passat B8 2015 on dashboard, the AMBIENT LIGHT ornaments with RGB, and electrical connections was made in the following way :
Pin 1 (T3ex / T3ey) from RGB...
Hy,
Goublin
You have only white light in all doors, because your doors do not have RGB LED MODULE 3G0927103G installed .
The RGB LED MODULE can be bought separately for each door but I don't...
@TBAx ,
Hy,
I found HUMIDITY SENSOR but with code 5K7955547 .
Is good this code for PASSAT B8 ?
Thanks .
Ok, thanks.
But if I buy and change only the windshield sensor is it necessary to make electrical changes ?
What is part number code are the RLFS ?
Thanks .
Ok, I understood .
But please tell me what this sensor looks like or what code it has?
Because this codding was accepted :
Select Central Electrics 09
Select LONG CODING HELPER
Select RLS...
Hi Everyone,
Today I tried to activate RAIN CLOSING on my 2015 Passat B8 after this information :
Select Central Electrics 09 ...
Hello,
@PetrolDave
You can see below complete VCDS log :
Tuesday,16,July,2019,12:36:45:62612
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 19.6.1.0 (x64) ...
Hello colleagues,
I need a little help from you.
After I made retrofit to the AID, I observe that I don't receive information about AdBlue RANGE, as in the picture below :
...
Hy,
I am interested to make same change on my FULL LED HEADLAMP but unfortunately I don't know what channels from below list I need to modify :
For left side .
ENG116940-ENG115954-Leuchte4 TFL...
Hy,
Yesterday I tried to activate Daytime Running Light on the LED from the interior (near to the front grille) on my EU Passat B8 with FULL LED HEADLAMP .
I tried to adapt this channels on BCM :...
@Dana .
Where to find :
IDE08786-ENG115724-Assistance light functions-Lichtsensorempfindlichkeit normal
In adaptation of RAIN & LIGHT SENSOR or BCM ???
Thanks .
Hy guys,
I want to ask you if anybody of you know how to set LIGHT SENSOR SENSITIVITY with VCDS to stop starting the DIPPER HEADLIGHT BEAM in the middle of the day .
Thanks .
Hi,
Is anybody here who did retrofit from AMBIENT LIGHT 1 (all doors only) to AMBIENT LIGHT 2 (all doors and dashboard) on Passat B8 2015 ?
I buyed the ornaments for dashboard with AMBIENT LIGHT...
Look for the thread initiated by our colleague "bbusato" .
He explain how made the AID retrofit on his car Vw Golf and in his thread you found attached pictures from VCDS .
But you need to know...
I solved my problem .
@drennie599
Don't be so sure about ODIS !!!
I made this retrofit on my Passat B8 2.0 BiTDI 2015, here in Romania and ODIS made 40% of coding .
The difference of 60% of coding was made with...
Map view on Passat B8 2015 AID = Solved !
But I have the last two questions for you @bbusato :
1. Did you ever use ODIS, or just only VCDS for this retrofit ?
2. If you use only VCDS, how you...
@bbusato
Hello
I have some questions about your AID RETROFIT .
1. The coding of DISCOVER PRO (5F) it was made of you personally with VCDS or only some of it ?
2. I have an Passat B8 2.0 BiTDI...
If on this forum is a better colleague in coding with VCDS I attach here a COMPLETE SCAN of my car .
Maybe he knows what to modify when coding from addresses 17 and 5F to display the map on AID ....
@donnib
I made this RETROFIT on my Passat B8 2.0 BiTDI from 2015 here in Romania .
If you want to made this retrofit with second hand parts you need to buy an AID from 2017 (year of your car...