Search:

Replace ABS/ESP control 1K0 907 379AD

Hello.. coolant pump on this EA888 gen3 CJEB is mechanical but integrated with electric engine temperature management module [thermostat]....so it is advisable to log coolant temperature at engine...

You may have a boost leak,actually the squeaking is whistling....check boost hoses to/from intercooler and intake manifold gasket etc

Don't I think there's a new updated intake manifold from VW that cures this malaise?

Worn clutchpacks,

I once had to battle a similar code on an A4 8K CDHB motor after the previous garage had replaced G40 twice,engine oil and ...etc,we went for a test drive,logged misfire counters....found out...

I think you need to manually reset 53, 55?....and 56

I'll check for you tomorrow on ETKA

Kindly check on official parts catalog ,either ETKA or Partslink24.com with VIN to see if compatible

Posting a final autoscan wouldn't hurt

Hello,your post is likely to gather dust because no autoscan is present

I think button for parking brake faulty,so common on Passat 3C....worth checking wiring from /to it.....,check here as well.... http://wiki.ross-tech.com/wiki/index.php/02443

Consider carbon cleaning if not done so....and bear in mind that precatalyst warm up period exhibits such symptoms....I think you got misfires but below MIL detection threshold....log misfire...

This is what VAG repair literature says: Pressing in sealing flange with sender wheel

Note
* the sealing flange with a PTFE seal is equipped with a sealing lip support ring.This support ring...

Really 1.4 CAX isn't equipped with Mass Air flow sensor G70....this motor is equipped with charge air pressure sender G31,intake air temperature sender G299 which form one unit just above throttle...

oh my,ive not given it a serious thought,let me kick away this laziness

#

A big thank you to Jack and Dana.....all the two codings were accepted,but I went the extra mile to see if all would stay but the second one was dumped multiple times even after completing basic...

Will have car tomorrow and get back.... thanks

@Dana @Jack...../\

Saturday,27,April,2019,13:26:51:21182
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 18.9.1.0 (x64) HEX-V2 CB: 0.4437.4
Data version: 20190114 DS296.0...

Saturday,27,April,2019,13:24:03:21182
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 18.9.1.0 (x64) HEX-V2 CB: 0.4437.4
Data version: 20190114 DS296.0...

Hi guys,below is an autoscan of a 2009 GTI that had its ABS/ESP control replaced with an updated one elsewhere, owner claims the old one lost and refused to communicate.....unfortunately I forgot to...

try checking wiring /connector to /from number 2 coilpack/injector valve for cleanliness snug fit etc

Blx motor is notorious for Nitrogen Oxide sender failure...just as Uwe has aforementioned... fix that as well as the multiple evap errors,and check map cooling thermostat as well...with all those...

https://forums.ross-tech.com/showthread.php?4533-2004-Audi-A8-Air-Suspension-help-please/page2