Search:

Type: Posts; User: morski

Page 1 of 5 1 2 3 4

Search: Search took 0.01 seconds.

  1. I think my question is very relevant as the OP...

    I think my question is very relevant as the OP fitted a steering wheel with the stop start & drive select buttons which need to communicate with the car somehow through the slip ring into the car....
  2. Replies
    4
    Views
    251

    Those are for the 2020 RS6 model amongst...

    Those are for the 2020 RS6 model amongst others... Yours should be 7PP907275 F or G depending on what frequency code you have in the PR codes list
  3. Any joy getting the stop/start & drive select...

    Any joy getting the stop/start & drive select buttons working?
  4. Replies
    11
    Views
    428

    I doubt you will be able to pin it out or...

    I doubt you will be able to pin it out or something as the sensor looks like a hall sensor or similar defo not a microswitch
  5. Replies
    11
    Views
    428

    You can buy the loom with the sensors on it but...

    You can buy the loom with the sensors on it but they are 50 per seat. but it needs to connect into the sensor, seat occ mat, belt buckle etc so you must have that partial loom already there but...
  6. Replies
    11
    Views
    428

    Take the sensors off the old seats and wire them...

    Take the sensors off the old seats and wire them back into the loom so the car knows they are there. Whether or not they will be looking for comparison values against its stored values is unknown
  7. Replies
    4
    Views
    375

    The thick D&W books were half full of scantily...

    The thick D&W books were half full of scantily clad girls !! lol
  8. If you have got these working can you update it...

    If you have got these working can you update it here for future reference for other users...
  9. This is the coding from my E-tron with LED...

    This is the coding from my E-tron with LED headlights:

    Address 55: Headlight Range (J745) Labels:* None
    Part No SW: 8V0 907 357 A HW: 7P6 907 357 B
    Component: MxB-ECU 001...
  10. Its missing the last letter on your old headlight...

    Its missing the last letter on your old headlight but as your in the UK we can assume its 'D' with PR code AV0 for 'driving on the Left' ! Letter C would be for driving on the right which is European...
  11. Nope... absolutely nothing... so far

    Nope... absolutely nothing... so far
  12. Audi have always used 2 different part numbers...

    Audi have always used 2 different part numbers for their headlights. The part number on the actual lamp assembly is always different to the one listed on ETKA. It does gon in when you enter it but...
  13. Replies
    4
    Views
    2,498

    A typical battery charger wont work.It cant...

    A typical battery charger wont work.It cant supply enough ampage to keep the control units alive. You need a battery support unit. I have a Ring rated at 50A and easily see 28A+ regularly being drawn...
  14. iirc Autoglass charge 250+vat to do an alignment...

    iirc Autoglass charge 250+vat to do an alignment and Audi charge 200+vat. There are others out there who might have the Hella system or Autel ADAS who can do it cheaper but worth ringing around.
  15. Which crash sensors have you replaced? They dont...

    Which crash sensors have you replaced? They dont need any coding and usually work straight out of the box unless they are cheap chinese crap then you can bang your head on a brick wall to no avail
  16. Replies
    5
    Views
    343

    Looks like you mechanic has not done the job...

    Looks like you mechanic has not done the job properly.The steering angle sensor needs calibrating for a start. You will need VCDS or a similar diagnostic tool to recalibrate the sensor. Not difficult...
  17. Thread: Battery

    by morski
    Replies
    34
    Views
    1,452

    A new battery might not be super cheap but they...

    A new battery might not be super cheap but they can be the magic pill to huge host of issues.
  18. Where's the first part of your scan? Is the...

    Where's the first part of your scan?

    Is the new module the exact same part number as your old one? Is the coding the same?
    Normally a new ecu would be a virgin unit with no coding at all but...
  19. Replies
    4
    Views
    302

    You can get the engine to start... Once you have...

    You can get the engine to start... Once you have have the power gauge on left showing ready press the accelerator to the floor and the engine will start. but as Uwe has stated the battery disconnect...
  20. Thread: Audi a3 8v

    by morski
    Replies
    8
    Views
    471

    Sorry...my sarcasm comes across as a bit strong...

    Sorry...my sarcasm comes across as a bit strong at times.. :D
  21. Thread: Audi a3 8v

    by morski
    Replies
    8
    Views
    471

    Yes, Audi sell bypass resistors. Just ask the...

    Yes, Audi sell bypass resistors. Just ask the parts department which airbag you want to bypass and they will supply you one. Steering airbag resistors are always in stock.
  22. Whats your transmission code?

    Whats your transmission code?
  23. Thread: Audi a3 8v

    by morski
    Replies
    8
    Views
    471

    Wow, you should put the car back together first,...

    Wow, you should put the car back together first, clear fault codes and then see what you have left.
    Airbag issue needs new bonnet actuators. These blow after a frontal impact and raise the bonnet...
  24. Replies
    16
    Views
    893

    Probably due to a mismatch of VIN' no's in the...

    Probably due to a mismatch of VIN' no's in the modules. You would need to go online and recode the modules with the correct VIn so they are all the same.
  25. Replies
    12
    Views
    7,463

    any particular vendor you recommend in china. pm...

    any particular vendor you recommend in china. pm if rules apply for posting here. thanks
Results 1 to 25 of 115
Page 1 of 5 1 2 3 4