Search:

Type: Posts; User: Curtiss

Search: Search took 0.01 seconds.

  1. Thank you for the input.

    Thank you for the input.
  2. PTU/Gearbox Do they share fluid? 6 speed Quattro

    Good morning,
    I just replaced the Clutch in my 2008 Audi TT 3.2L and was wandering if the Gearbox oil also fills up the PTU? When I removed the Starboard (right) CV axle mount gear from the PTU it...
  3. Please stand by, I have the car on the lift....

    Please stand by, I have the car on the lift. Clutch has gone bad and I am currently replacing.
    Thanks,
    Curtiss
  4. Awesome, I will attempt this procedure and let...

    Awesome,
    I will attempt this procedure and let ya'll know the outcome.
    Thanks again!
    Curtiss
  5. Coding VIN to new/used Magnetic Ride Control Module

    No response in a while, Still need help coding VIN # to new magnetic ride control module.
    Thanks,
    Curtiss



    Address 14: Susp. Elect. Labels: 8P0-907-376.lbl
    Part No SW: 8J0 910 376...
  6. Does anyone know how to code this used control...

    Does anyone know how to code this used control module so the light will turn off on my cluster? Somehow I need to tell it the VIN #.

    1 Fault Found:
    01794 - Control Module - Incorrect Chassis...
  7. Ok, Thanks for looking. Curtiss Upon reading...

    Ok, Thanks for looking.
    Curtiss

    Upon reading the manual and learning what these line items mean, I have figured out what was probably obvious to Ya'll in the first place. see below in red. Slowly...
  8. https://drive.google.com/file/d/1IIe2dwCixsY3v6eU-...

    https://drive.google.com/file/d/1IIe2dwCixsY3v6eU-YJqBrGb_oRf8mmT/view?usp=sharing

    Picture here?

    I guess i don't know how to add the picture from my Google Drive?...
  9. Good morning, Here is what displays when 080 and...

    Good morning,
    Here is what displays when 080 and 081 are read at the moment. In the beginning of this read process I was not educated on VCDS and started following the bouncing ball and coding...
  10. Thank you, Will do this evening and display...

    Thank you,
    Will do this evening and display info.
    Curtiss
  11. Thanks again in advance for responding to my...

    Thanks again in advance for responding to my issue. I believe that what we have here is an old wrench turner (Me) trying to figure out "I.T." computer language/Terms/ECT......

    Where would I go to...
  12. 2008 audi tt quatro 3.2l manual adaption 080 081 ???

    I honestly don't know what i'm doing with adaption code 080 and 081. I went to adaption icon put 080 in, it was accepted upon pressing enter. I did a cold rest? Turned the key off then on within 5...
  13. (Hmm... I don't see anything documented for that...

    (Hmm... I don't see anything documented for that module.

    Take a look if this Adaptation channels 080 or 081 can be read in this module.

    -Uwe-)

    Will do this evening, Thanks,

    (I would think...
  14. 2008 audi tt quatro 3.2l manual

    Monday,24,February,2020,19:06:41:52425
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 19.6.2.2 (x64) HEX-V2 CB: 0.4508.4
    Data version: 20200210 DS308.0...
  15. Magnetic ride control module replacement with used Ebay part. VIN calibration 2008 TT

    Good afternoon all, New here. I have a 2008 Audi TT 3.2L Quattro Manual. I recently replaced the Magnetic Ride control module with an Ebay unit that is used. VCDS says that the VIN does not recognize...
Results 1 to 15 of 16