Search:

Type: Posts; User: rhill2901

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. guess this has been an issue with this bcm and...

    guess this has been an issue with this bcm and led headlights. Further investigating, I found some forums (not here sadly) that talk about setting byte 18 of the BCM to 8F, which is an european...
  2. Replies
    8
    Views
    281

    What year is your car? or more specifically,...

    What year is your car? or more specifically, what year is your MIB? Is it a MIB2 STD2 pq? or are you refering to the MQB MK7 version?
  3. Replies
    8
    Views
    281

    I tested those outputs, and even thought the pins...

    I tested those outputs, and even thought the pins are there, there is no sound coming out from them. So I will go with splicing off the rear speakers and crossover to the subwoofer via the JL audio...
  4. LED Headlight Retrofit Completed, now bulb out errors.

    Tuesday,19,May,2020,10:04:34:43477
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 20.4.0.1 (x64)
    Data version: 20200331 DS317.0
    www.Ross-Tech.com


    VIN:...
  5. Not to hijack the thread, but can you put a...

    Not to hijack the thread, but can you put a canbus gateway on a pq25 car and disable the canbus gateway in the BCM?
  6. Replies
    8
    Views
    281

    https://www.ebay.com/itm/TRUNK-MOUNTED-FENDER-SUBW...

    https://www.ebay.com/itm/TRUNK-MOUNTED-FENDER-SUBWOOFER-SPEAKER-5C6035621A-VW-JETTA-GLI-SEDAN-15-18-MK7/124057755261?hash=item1ce26b1e7d:g:FqsAAOSwQApeKQNw

    This was mounted in the rear deck of a...
  7. Replies
    8
    Views
    281

    https://www.google.com/search?q=mib2-wiring.jpg&tb...

    https://www.google.com/search?q=mib2-wiring.jpg&tbm=isch&source=iu&ictx=1&fir=MEbK9L2hcEg2WM%253A%252C2UIbboILVecUwM%252C_&vet=1&usg=AI4_-kRchpFWzni-vzwJXH-13Bl6jlHd0w&sa=X&ved=2ahUKEwjSrJarianpAhUWVs...
  8. Replies
    8
    Views
    281

    MIB2 STD2 Speaker outputs

    I'm looking to add subwoofer output from the MIB2 STD2 +nav head unit that I have retrofitted into my 2014 vw jetta tdi. I have researched this and found out that there is a speaker 5, and a...
  9. Replies
    41
    Views
    31,266

    TooLittleTime, did you ever find out why your...

    TooLittleTime, did you ever find out why your setpoint for the cruise wasn't working? Was it a ECM problem? I have the same problem after upgrading my tdi to a 2015 vw tdi gauge cluster.
  10. just nonsense

    Your FOD definition is actually wrong. FOD stands for Foreign Object Debris, which is the lose article that could potentially be ingested by an aircraft. Foreign Object Damage is the result of...
  11. ok ty Uwe. That answers my original question. ...

    ok ty Uwe. That answers my original question. I'll just continue to drive my car to see if the final 3 readiness settings finally set. Just being impatient, I think. I'm fine with the BCM being...
  12. Ok, I adjusted some of the connection settings,...

    Ok, I adjusted some of the connection settings, mainly added a little more delay to the timing and it seems consistent now.



    Tuesday,14,April,2020,17:28:57:43477
    VCDS -- Windows Based VAG/VAS...
  13. Uwe, I understand what you are referring to,...

    Uwe,

    I understand what you are referring to, but for some reason on this car, when I do an autoscan, it doesn't connect randomly to some modules. I can go enter each module and look at them, but...
  14. Car runs fine. I've had Catalyst not ready, and...

    Car runs fine. I've had Catalyst not ready, and both o2 sensor ready states not set for 60 miles. It didn't look like it was going to clear, so I started addressing other issues that are pending. ...
  15. So B+ for lighting will put car in limp mode?

    So B+ for lighting will put car in limp mode?
  16. I failed to mention that I retrofitted a 90E bcm...

    I failed to mention that I retrofitted a 90E bcm into the car with an instrument cluster. But would those errors cause a limp mode? Terminal 30 isn't currently wired in. The information...
  17. 2014 VW Jetta TDI 03789 - Terminal 75 Limp Mode Active 000

    I"m getting a Terminal 75 LImp Mode Active and the only other errors that "may" cause the problem is Terminal 30 errors for lighting. This won't cause a limp mode will it? Since VCDS isn't really...
  18. I reinstalled the 2 bcms I had and coded them...

    I reinstalled the 2 bcms I had and coded them identical to the one that worked and it was a no go. I bought 2 bad bcm's off of ebay...
  19. By all means, don't take my information as coming...

    By all means, don't take my information as coming from an expert. I'm a novice at best. I enjoy modding though. With proper documentation, youtube and these forums, anything is possible, just have...
  20. Ok, the replacement BCM did it. Could of been...

    Ok, the replacement BCM did it. Could of been the BCM was bad or something up with the coding. There is some differences in the coding, but I can't find any documentation to tell me what they are. ...
  21. I looked on ETKA and its saying all 090's are...

    I looked on ETKA and its saying all 090's are 434Mhz? If thats true, it might be easier to change my keys to 434Mhz and adapt them to the cluster.
  22. Thanks for that info Spacewalker. The two BCM's...

    Thanks for that info Spacewalker. The two BCM's that I have tried are 7H0937090E and 7E0937189, which came from NAR cars? If I am wrong thinking these are correct, could you point me in the right...
  23. I acquired this info from a vw polo website which...

    I acquired this info from a vw polo website which was posted by those with european cars:

    "BCMs with 434 MHz radio carrier frequency ends with the letters B, D, F, H, K, M, P, R, T. Pick up one of...
  24. so nobody knows? or anybody care to help?

    so nobody knows? or anybody care to help?
  25. Or.... you could use a dpdt to control both the...

    Or.... you could use a dpdt to control both the left and right, tie output of your switch to its normal path. Find out the resistance of the circuit, and install a resistor to simulate it, and...
Results 1 to 25 of 36
Page 1 of 2 1 2