Search:

Type: Posts; User: vwtech

Page 1 of 9 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    34
    Views
    278

    No you have two left to pass. Long ride or set...

    No you have two left to pass.
    Long ride or set readiness but Cat has to be HOT!

    Good Luck
  2. Replies
    34
    Views
    278

    You have to clears the code for it to go away....

    You have to clears the code for it to go away.
    It passes the evap test when you run it. But that doesn't mean it will pass every time the ECU runs the test?
    Running hot and over a few trips it may...
  3. Replies
    6
    Views
    109

    Try measuring blocks instead or advanced...

    Try measuring blocks instead or advanced measuring blocks.
    Sometimes advanced doesn't work in older cars.

    Good Luck
  4. I am just a coal cracker from PA. But maybe it's...

    I am just a coal cracker from PA.
    But maybe it's me?
    When in a right hand drive car is a left or right turn actually different?

    Didn't think so....

    Good Luck
  5. dhoerl, Glad Jack pointed you in right direction....

    dhoerl, Glad Jack pointed you in right direction.

    But in the future when determining the side of engine you are referring to. Put yourself in the driver seat! Not looking at the engine!

    "The...
  6. "Also is it possible the throttle body elec plug...

    "Also is it possible the throttle body elec plug is still my problem and taping the wires securely may have made a better connection thus making the CEL go away?"

    I say bingo!

    Good Luck
  7. I have changed about 4 V/B in these for hard up...

    I have changed about 4 V/B in these for hard up shifts and down shifts. When trans was hot. Cold they seem to shift better.
    I don't like the dealer V/B replacements. They are new units but seem to...
  8. Get the factory info you can pay by the day just...

    Get the factory info you can pay by the day just get printing rights and load the printer.

    https://erwin.audiusa.com/erwin/showHome.do

    Good Luck
  9. Replies
    10
    Views
    421

    Dude just the basics. What are fuel trims in...

    Dude just the basics.
    What are fuel trims in measuring block 032 BOTH at idle and at part load. Field 1&2. After a test drive and letting idle 5 min after test drive.
    What about the oil filer cap...
  10. Replies
    10
    Views
    421

    I 2nd Jeff let car idle and try to remove oil...

    I 2nd Jeff let car idle and try to remove oil filer cap.
    Idle will change that is normal.
    Want to know if cap is sucked on too tight?
    Also Fuel trim numbers from group 032 after a test drive and...
  11. I agree with Jack "Most Likely it's not pedal...

    I agree with Jack "Most Likely it's not pedal sensor"
    I am still going with wiring all 6 from T/B to ECU.
    Have you ever looked at ECU connector for problems?

    Good Luck
  12. Modules known to have crack solder joints that...

    Modules known to have crack solder joints that set this code in cold weather expands the joints.
    Can't clear it. It's like crash data.

    Good Luck
  13. I am going with the wiring the wiring job or the...

    I am going with the wiring the wiring job or the crimps.
    On the older one's that had no TSB about the T/B wiring.
    I have done over lay harness of all 6 wires from T/B to ECU all 6 wires. That has...
  14. Replies
    23
    Views
    580

    Jack to do immobilizer delete does he still need...

    Jack to do immobilizer delete does he still need to send you cluster, ECU and keys?
    Or just the ECU?

    Good Luck
  15. Replies
    23
    Views
    580

    Oh Jack will fix it right if you send cluster...

    Oh Jack will fix it right if you send cluster keys and ECU. But I just know you want to fix it.
    But I think cluster is bad. And Like Jack said with a car this old who's gonna steal it?
    So...
  16. Replies
    23
    Views
    580

    Jack I sent him here from whortex. I couldn't...

    Jack I sent him here from whortex.
    I couldn't understand why it shows no key in MB 022?
    I wanted him to change the WSC in cluster to prove SKC was correct.
    He couldn't change it so I thought wrong...
  17. That would depend on the wiring connections you...

    That would depend on the wiring connections you made and if they hold up.
    100 miles should be good.

    Good Luck
  18. I told you jack is the man! You are lucky your...

    I told you jack is the man!
    You are lucky your wife gave you some of the German chocolate!
    My wife eat's them all! I don't get $hit.
    And after all her worrying she got German chocolate.

    Good...
  19. Ben tell your wife to relax. Jack is too...

    Ben tell your wife to relax.
    Jack is too honest!!!
    Good Luck
  20. Jack where did the patience come from? Are you...

    Jack where did the patience come from? Are you alright?
    I think it's because you are more curious as to why then anything.:popcorn:
    Good Luck
  21. Go to N.J. get the paper work and send Jack the...

    Go to N.J. get the paper work and send Jack the cluster already. Only one more hoop to jump thru!
    If Jack can't do it no one can!:popcorn:

    Good Luck
  22. Don't solder use the crimp type connectors. Good...

    Don't solder use the crimp type connectors.
    Good luck
  23. Basically you need a TV repair harness from the...

    Basically you need a TV repair harness from the dealer.
    They can install or you do it yourself. Check you P.M.

    Good Luck
  24. Replies
    37
    Views
    1,004

    I would check all connections at battery and...

    I would check all connections at battery and battery fuse box.
    the big main fuses feed the fuse 37
    Take this with caution because I do not know what engine code you have.

    You really need to use...
  25. Replies
    37
    Views
    1,004

    Terminal 30 should be hot at all times from fuse...

    Terminal 30 should be hot at all times from fuse 37. and also supply power to ECU pin 62.
    IF not check fuse 37 for power.

    If power is at fuse 37 and terminal 30 of relay?
    Jumping terminal 30...
Results 1 to 25 of 225
Page 1 of 9 1 2 3 4