Search:

Type: Posts; User: Mark Hudson

Search: Search took 0.00 seconds.

  1. Replies
    9
    Views
    416

    Ok, I have reverted the coding and tried with...

    Ok, I have reverted the coding and tried with both 253 and 252 in channel 18 but the lights do not perform the auto level test on start up still and the error for the adaptive lights has re-appeared...
  2. Replies
    9
    Views
    416

    Sorry for the delay in reply... Could you clarify...

    Sorry for the delay in reply... Could you clarify what you mean by 'reverse the coding in byte 19?

    Thanks
    Mark
  3. Replies
    9
    Views
    416

    I tried this it still didn't make the lights move...

    I tried this it still didn't make the lights move up and down on startup (auto level motor check) which i presume means the auto level is still not operational. Channel 18 did have 255 stored as you...
  4. Replies
    9
    Views
    416

    Thanks, that seems to have done the trick however...

    Thanks, that seems to have done the trick however the lights do not auto level anymore, is this how they are now and there is no way to get the auto level working again?

    Mark
  5. Replies
    9
    Views
    416

    Audi RS4 AFS Removal/Delete Coding

    Hi, I am looking for some advice on a vehicle which should have AFS headlamps installed however they have been replaced with non-AFS units after accident damage. The instrument panel currently...
  6. Hi, Thanks for your response, i have replaced the...

    Hi, Thanks for your response, i have replaced the relay with a new Hella relay which has made no difference to the fault. Please let me know if you have any further ideas...

    Thanks Again
    Mark
  7. Audi Q7 02645 - Valves for Level Control System Mechanical Malfunction

    Hi, We have a problem with a 2012 Audi Q7 3.0TDI.

    When the vehicle is stationary the air suspension operates perfectly. Upon driving all is well until you slow down to less than 15mph whether that...
  8. Replies
    12
    Views
    756

    Sorry, thatís just me not reading his post...

    Sorry, thatís just me not reading his post correctly! Thanks for clearing that up, thanks a lot for all your help.

    Regards
    Mark
  9. Replies
    12
    Views
    756

    Is there any particular part number for a module...

    Is there any particular part number for a module with sw0651?

    Mark
  10. Replies
    12
    Views
    756

    Thatís great, thanks for that, does yours have...

    Thatís great, thanks for that, does yours have LED licence plate lamps?

    Cheers
  11. Replies
    12
    Views
    756

    As far as I was aware when you program in a new...

    As far as I was aware when you program in a new module with ODIS it parameterises the module which is making me think that you donít need a specificly parameterizes module if you are going to...
  12. Replies
    12
    Views
    756

    So in other words it doesnít matter about that...

    So in other words it doesnít matter about that code for picking up a used module, I will just be able to re-parameterise the module?

    Mark
  13. Replies
    12
    Views
    756

    Hi, thanks for youíre reply. I have done this and...

    Hi, thanks for youíre reply. I have done this and it has given me a different part number (1K0 937 087 E) however it has three letters at the end (Z00) or something like that, when I put my own vin...
  14. Replies
    12
    Views
    756

    VW Golf MK6 Highline BCM/CECM Upgrade

    Hi, I have a 2010 VW Golf GTD which currently has a midline CECM installed. I would like to upgrade this to a highline CECM to allow me to install genuine Xenon headlights & genuine LED tail lights...
Results 1 to 14 of 14