Search:

Type: Posts; User: stylers

Search: Search took 0.01 seconds.

  1. Replies
    4
    Views
    199

    Hi All, just posting this scan with the old...

    Hi All,

    just posting this scan with the old airbag module as requested.. it looks like there is no way to fix this except for the exact replacement module..

    ...
  2. Hi, As Uwe says, those pressure sensor faults...

    Hi,

    As Uwe says, those pressure sensor faults aren't good.. check the pressure values with ignition on and if anything other than 0 there's something up.. sensors do go faulty.. you could also...
  3. Hi, In regards to the error "Service not...

    Hi,

    In regards to the error "Service not supported in active session" doing adaptations I have found that you need to disconnect the session (go back to main VCDS screen) and turn off ignition and...
  4. Replies
    4
    Views
    199

    Hi Uwe, Thanks for reply. I know the coding is...

    Hi Uwe,

    Thanks for reply. I know the coding is different even on the second one we got.. I have verified the CAN wiring to all of the modules it goes to, namely the instruments, airbag module and...
  5. Replies
    4
    Views
    199

    Old VW lupo airbag module issues ?

    Howdy Folks,

    looking at an old 2002 VW Lupo with an airbag module issue. The original module was water damaged and showing 65535 and other hardware fault codes, so a second hand module with same...
  6. Hi Folks, not a great way to start a first...

    Hi Folks,

    not a great way to start a first post but anyway..

    was there ever any resolution to this issue via software update or otherwise ? Have seen a car with exactly same symptoms, very same...
Results 1 to 6 of 6