Search:

Type: Posts; User: dand

Search: Search took 0.01 seconds.

  1. I installed a used abs module but only...

    I installed a used abs module but only electrically
    still no communication with module
    checked for powers and grounds . missing 12v reference on one of the pins. Traced it back to a misplaced...
  2. sorry UWE for the mispell I connected a pico...

    sorry UWE for the mispell

    I connected a pico scope to can-hi and can-lo. turned key to on. noticed both channels at 2.5 volts flat lining with a little noise spikes. can see any data being...
  3. thanks for pointing that out Ewe I see that now...

    thanks for pointing that out Ewe
    I see that now that I look at the scan
    will report results later
  4. 2007 jetta 2.5 mk5- car runs fine but fault codes on dash

    initial problem 500ma parasitic drain.
    ran scan and had 5 fault codes but car ran fine. no lights on dash
    checked all fuses. 500ma draw on lower engine fuse block. wire headiing to firewall and...
Results 1 to 4 of 4