Search:

Type: Posts; User: TBAx

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Maybe a software bug in your VC/AID? Can you...

    Maybe a software bug in your VC/AID?
    Can you post a video.
  2. The driver's logbook, I don't know if it is used...

    The driver's logbook, I don't know if it is used outside of Germany, where it is named "Fahrtenbuch".
    However I have never seen this function "in the wild" so I am not sure, if this even does...
  3. Replies
    12
    Views
    308

    Don't try to be lazy. It's the same channel, only...

    Don't try to be lazy. It's the same channel, only the prefix/group is different: IDE08788-ENG122209-Dyn. turn signal modes-Notwarn_blinken_NBA_Phase_2
  4. Replies
    12
    Views
    308

    Yes, it behaves exactly as if you manually...

    Yes, it behaves exactly as if you manually enabled the hazard lights. It also stops the emergency flashing as soon as you start driving again (at around 20 km/h i believe).
  5. I tried various bit combinations in the ESP...

    I tried various bit combinations in the ESP controller to prevent the message from appearing. Changing things in the instrument cluster coding and adaption didn't change anything, too.
    My guess is,...
  6. Can someone explain to me, aside from the...

    Can someone explain to me, aside from the auto-scan, what the issue is?
  7. Can confirm ZNormT6s statement.

    Can confirm ZNormT6s statement.
  8. Thread: Scandinavian DRL

    by TBAx
    Replies
    1
    Views
    129

    As far as I know, this can only be (safely) done...

    As far as I know, this can only be (safely) done using a tool, that can read/write the BCM EEPROM.

    I did this a few times and it is working well.
  9. Thread: EA189 Rollback

    by TBAx
    Replies
    3
    Views
    157

    It should have had another software part number...

    It should have had another software part number prior to the emissions update. Just check your old Auto-Scan logs. The TK in "03L 906 023 TK" came only after the update as far as I am informed.
  10. I guess this can't be done using VCDS, but as the...

    I guess this can't be done using VCDS, but as the car is tuned, maybe the tuner is able to optimize the idle rpm.
    Normally they are able to do this task. Just ask them to fix your vibration...
  11. Thread: EA189 Rollback

    by TBAx
    Replies
    3
    Views
    157

    It's in the current Volkswagen flash disc...

    It's in the current Volkswagen flash disc available to everyone, according to this: https://vag-flashinfo.de/index.php?partno=03L+906+023+TK+&as=
    The tuner should have no hazzle flashing back the...
  12. I beg your pardon my fault. :( I just looked at...

    I beg your pardon my fault. :(
    I just looked at the year in the topics title and went with it. :/
  13. Hi, in your instrument cluster (module 17)...

    Hi,

    in your instrument cluster (module 17) there is an adaption channel named "Illumination_algorithm-Scale_switching_algorithm". What is it's current value?
    You can try the value "lds", which...
  14. You should, as a first step when getting in touch...

    You should, as a first step when getting in touch with a new car, perform a full Auto-Scan and also create Adaption Channel maps for all modules.
    This will function as a failsafe for most things...
  15. Replies
    92
    Views
    85,902

    The 5K7 module comes from an Up. Since the...

    The 5K7 module comes from an Up. Since the platform is somewhat different from the MQB, which the Passat is based on, I somewhat doubt this one will work correctly.
  16. There is also another little quirk related to...

    There is also another little quirk related to dropdowns.. I mostly navigate VCDS and LCode with the keyboard while doing thinks with the mouse/touchpad where it is faster.

    When opening a dropdown...
  17. Replies
    10
    Views
    372

    Your 02 is NAR, which is correct. The normal...

    Your 02 is NAR, which is correct. The normal (non-experimental) labels are done by Ross-Tech and sometimes lack variants (often because they are not yet confirmed), while including others, that might...
  18. Replies
    5
    Views
    244

    Side note: These adaption channels are not in the...

    Side note: These adaption channels are not in the BCM (address 09), but rather the HMI (address 5F).
  19. There are a few things to consider when working...

    There are a few things to consider when working with exterior mirror dimming.

    I hope everything applies to your Arteon as well, the statements come from my O3RS, which has losely the same hardware...
  20. Replies
    92
    Views
    85,902

    Afaik you can simply switch them. Recoding is...

    Afaik you can simply switch them. Recoding is necessary but that's it. Part number is "5Q0 955 547" without an index.
  21. Replies
    92
    Views
    85,902

    Those are the sensors. The lower one (with less...

    Those are the sensors. The lower one (with less "blue dots") is the RLHS, the one above the RLFS.

    http://img.tapatalk.com/d/14/10/12/de2uzytu.jpg

    Both do accept the coding but one of them will...
  22. Replies
    92
    Views
    85,902

    Doesn't work, if your car has an RLHS. Only RLFS...

    Doesn't work, if your car has an RLHS. Only RLFS can do it.
  23. That video is obviously very fishy. We dont see...

    That video is obviously very fishy. We dont see the coding being accepted. Also the module afterwards states, that a security access is required for changing an adaption channel. Normally this...
  24. Rain Closing will not work on this sensor. To...

    Rain Closing will not work on this sensor.
    To get the coding accepted you will have to enable Bit 1 & 2 together.
  25. Replies
    27
    Views
    586

    From the adaption channel names only the first...

    From the adaption channel names only the first one I would think could create such a problem.
    Glad you found and fixed the problem even without the forum and still reported the solution. :)
Results 1 to 25 of 480
Page 1 of 20 1 2 3 4