Search:

Type: Posts; User: Graham

Search: Search took 0.00 seconds.

  1. Replies
    2
    Views
    1,931

    Uwe, changed just the one bit as you suggested,...

    Uwe,
    changed just the one bit as you suggested, the code is now set at 01001. Funny thing is, the tiptronic buttons worked before the change but are not working now. I'm going to change it back to...
  2. Replies
    2
    Views
    1,931

    C5 allroad 01V Tiptronic Recode

    The current code for my gearbox is 00001. I would like to change it to 01101 as I have retrofitted the tiptronic steering wheel. For some reason, the code doesn't change when I input it.

    ...
  3. Replies
    2
    Views
    869

    Still problems with A4 B6 Avant 2.0 FSI

    Hi,
    I have now removed the steering wheel controller and any associated cruise control equipment and refitted the original steering wheel controller. I have also fitted a brand new in box Throttle...
  4. Replies
    4
    Views
    1,852

    The ECU was clear of faults. I had been driving...

    The ECU was clear of faults. I had been driving the car for a couple of days and thought I'd cured it once and for all.
    The Cruise Control was retrofitted by me and hadn't caused a problem until I...
  5. Replies
    4
    Views
    1,852

    More A4 B6 Engine Management Faults

    Carrying on from my previous post, I have changed the Clocks, ECU, transponder and Throttle Body. Everything appeared OK until driving the car today. I was doing approx 50mph and decided to switch...
  6. Took the ECU to be checked out. I have been told...

    Took the ECU to be checked out. I have been told that the Ecu is not repairable due to corrupt data / internal processor fault , although it was passing the tests. I decided to buy a set of clocks...
  7. Replies
    8
    Views
    3,731

    I did, but it still wont let me enter any value....

    I did, but it still wont let me enter any value.
    I will try and screen shot it tomorrow.
  8. Not sure which route to take here. I can either...

    Not sure which route to take here. I can either take the ECU to BBA-Reman to be checked out and repaired if defective or see if I can source another ECU from somewhere. A lot depends on price.
    ...
  9. Replies
    8
    Views
    3,731

    Address 16: Steering wheel Labels:...

    Address 16: Steering wheel Labels: 8E0-953-549.lbl
    Part No: 8E0 953 549 Q
    Component: Lenksáulenmodul 0601
    Coding: 01042
    Shop #: WSC 06325
    VCID:...
  10. Replies
    8
    Views
    3,731

    Here's my latest Autoscan complete with Engine...

    Here's my latest Autoscan complete with Engine Management faults.


    Saturday,21,October,2017,17:00:33:44933
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
    VCDS Version: 17.8.0.1...
  11. 2004 A4 B6 2.0 FSI (AWA) Sport Avant lack of power

    Earlier on in the week, I had the Traction Control / ESP warning light and the EPC warning light illuminate. The engine idled, but wouldn't rev. I switched the engine off for a few seconds and then...
  12. Replies
    8
    Views
    3,731

    A4 B6 Steering Wheel Controller

    Hi all, new to all this VCDS stuff.
    I have a 2004 A4 B6 Avant which I have retrofitted cruise control to. This is all working except that it throws up the following fault code
    01794 - Control...
Results 1 to 12 of 12