Search:

Type: Posts; User: gerberauto

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Audi 4H airsuspension problems

    I was able to get an online connection and we updated/programmed the Level Control unit, so now more faults except we need to do the new height adaption.
    Now the adaption procedure requires that...
  2. In addition I made the original scan with my...

    In addition I made the original scan with my original Hex+Can interface, today I wanted to make a new scan with the same interface, and it says that this interface is out of date
  3. Thank you for your excellent answer, While...

    Thank you for your excellent answer,
    While reading your link to do the proceedure I found our problem.
    We have reset all adaptions and code B2013 is present.
    There is no help from Audi dealer in...
  4. 2014 Audi A8 4H air suspension problems

    Dear VCDS Experts,

    We have the attached car in the shop, replaced 2 front suspension shocks, but somehow all settings are lost.
    codes: 403200 function shut off active
    and 367877 ride height...
  5. Replies
    33
    Views
    56,153

    Sticky: Thanks Uwe, I knew that there is a more...

    Thanks Uwe,

    I knew that there is a more difficult way to upload pictures. I will try it next time.:)
  6. Replies
    14
    Views
    6,545

    I just checked it has DPF and one oxygen sensor...

    I just checked it has DPF and one oxygen sensor at the beginning, I
    tried to post a picture, but I was not able to do so, its asking for an URL, but it comes from my files, desktop.

    The DPF...
  7. Replies
    14
    Views
    6,545

    Thank you for your reply, I have no idea how...

    Thank you for your reply,

    I have no idea how to find this out, its a car from our customer.

    Chris
  8. Replies
    14
    Views
    6,545

    Thank you Uwe, This car has been shipped to my...

    Thank you Uwe,

    This car has been shipped to my shop from another Philippine Island, since they couldn't help this customer.
    So how can I see if the ECU is modified, I can (with a friend) go...
  9. Replies
    14
    Views
    6,545

    Hi Uwe, I was able to find the "particle"...

    Hi Uwe,

    I was able to find the "particle" items and have some history and a new scan attached below,
    were we can see a fault of the airflow meter, I have tested 2 brand new Bosch and that fault...
  10. Replies
    14
    Views
    6,545

    Thank you very much Uwe, here is the auto-scan...

    Thank you very much Uwe,
    here is the auto-scan as requested

    Greetings from Asia/Philippines
    Chris


    Tuesday,29,November,2016,16:41:01:59804
    VCDS -- Windows Based VAG/VAS Emulator Running on...
  11. Replies
    14
    Views
    6,545

    Measurment blocks

    Dear Ross Tech forum,

    I havent been here for some time, but now I would need your advise.

    I have the latest update on my VCDS 16.8.3 and diagnosing an 2009 Audi A4 TDI CAGA engine.

    trying to...
  12. Replies
    5
    Views
    6,477

    Thank you Uwe, I was just thinking that with...

    Thank you Uwe,
    I was just thinking that with the older models (pumpe duese) you could try and adjust it to zero.
    But with this new model I cant see how much I am off or not off. Will the ECU...
  13. Replies
    5
    Views
    6,477

    I apologize, I should have known better, here is...

    I apologize, I should have known better, here is the scan:
    A4 TDI produced in 2009- model 2010, CAGA engine

    (the engine speed sensor error has been resolved, with a manually guessed adjustment,...
  14. Replies
    5
    Views
    6,477

    Measuring Blocks

    Today I wanted to check the camshaft timing in relation to crankshaft values on an Audi A4 TDI and I see after selecting 01 engine, that the measuring values are greyed out, that was with the latest...
  15. Replies
    17
    Views
    41,167

    I toke the module out yesterday to get the parts...

    I toke the module out yesterday to get the parts number, now after reading Your and Jason's post, I will put it back in, bleed the system and do the whole calibration procedure. Unfortunately there...
  16. Replies
    17
    Views
    41,167

    I agree these interferences may be able to...

    I agree these interferences may be able to trigger the lights, but shouldnt we be able to reset
    when they are not present anymore? There are no after market gadgets in that car.
  17. Replies
    17
    Views
    41,167

    Jack, Dana, Jason there is no ABS engagement...

    Jack, Dana, Jason

    there is no ABS engagement at all, the lights came on as soon as the car starts rolling, that's how it started.
    ( I had at the same time an ignition coil badly misfiring and...
  18. Replies
    17
    Views
    41,167

    Dana, that is the vehicle which I posted...

    Dana,

    that is the vehicle which I posted previously, with the transmission dual clutch error, remember I found out in Germany that
    these transmissions had a recall (corrosive and wrong oil...
  19. Replies
    17
    Views
    41,167

    Thank you Jack, here is the complete scan: ...

    Thank you Jack, here is the complete scan:


    Thursday,26,June,2014,12:19:08:59804
    VCDS -- Windows Based VAG/VAS Emulator
    VCDS Version: 12.12.2.0
    Data version: 20140212


    VIN:...
  20. Replies
    17
    Views
    41,167

    2010 Audi A3 ABS/ESP code 01130

    I was able to do the test drive the car for the lateral sensors and the ABS and the ABS flashing lights disappeared, that was 2 months ago,
    now I am getting the following code and lights are on...
  21. Jack, your initial answer was very close, you...

    Jack, your initial answer was very close, you mentioned oil and contamination, it is amazing what kind of
    problems, besides mechanical, all this new stuff can create.
    I got the flash files now,...
  22. The solution of my problem is right here: VW...

    The solution of my problem is right here:

    VW and Audi Germany are having recalls on these 7 speed transmissions and that explains that weird behavior of the electronics,
    here it is:

    VW...
  23. Replies
    4
    Views
    7,739

    Thank you very much, I will try that procedure...

    Thank you very much, I will try that procedure today.
    I have send you a PM.
  24. Replies
    4
    Views
    7,739

    Uwe, But when you replace the clutch, there is...

    Uwe,

    But when you replace the clutch, there is an adaption or adjustment process needed after the repair, similar as the 6speed AT.
    I know, the problem might be on the manufacturers side, but any...
  25. Replies
    4
    Views
    7,739

    DSG7 transmission using VCDS

    I have a question, in the instructions of VCDS when you click transmission it gets you to the screen with coding and basic settings, when you press adaption, you will get the adaption screen.

    I...
Results 1 to 25 of 43
Page 1 of 2 1 2