Search:

Type: Posts; User: myounus

Page 1 of 20 1 2 3 4

Search: Search took 0.06 seconds.

  1. Replies
    1
    Views
    36

    Please post a full scan for completness. I'd...

    Please post a full scan for completness.

    I'd check the wiring for breaks/damage water ingress.
  2. Replies
    1
    Views
    20

    Please can you post a scan. Thanks

    Please can you post a scan.
    Thanks
  3. Wales has seen its subsidies repeatedly cut. They...

    Wales has seen its subsidies repeatedly cut. They would actually benefit the most from independence as the UK give them the least and they host the largest continental employment due to industry. If...
  4. I second that. I would advise you to buy a ready...

    I second that. I would advise you to buy a ready made retrofit kit from the internet as you will need other parts that you may not have thought about, e.g. buzzers, sensor holders (yes these have to...
  5. It has nothing to do with Corbyn, although a lot...

    It has nothing to do with Corbyn, although a lot hated him because he wanted to bring back wealth to the many. It's all gone now so we're looking towards an independent England
  6. Scotland are going for a second independence,...

    Scotland are going for a second independence, Ireland reunification. Goodbye UK
  7. In that case the best bet for you is to ask...

    In that case the best bet for you is to ask someone with ODIS to reset the module back to factory standard. Either a dealer or an independent garage with ODIS online can do this for you.
  8. Replies
    13
    Views
    343

    There are different ones. I think yours is 7LO...

    There are different ones. I think yours is 7LO 959 112. This is described as "seat adjustment motor for height adjustment". Right side
    The PR numbers are for vehicles 3L4, 3L5 and 3PN.
  9. Byte 18 is always a nightmare. Try 1A

    Byte 18 is always a nightmare. Try 1A
  10. Replies
    13
    Views
    343

    I'm not at home to check on ETKA but you can look...

    I'm not at home to check on ETKA but you can look on the motor itself or give your reg/VIN to your local TPS and they'll give you a price and part number. What year is your car?
  11. If when measuring distance then it could be...

    If when measuring distance then it could be either sensor or wiring fault. Take them off and put them back on one by one and test to see if the error still happens. This way you can diagnose which...
  12. "Kind of exposed??" Did you cut them/damage...

    "Kind of exposed??"
    Did you cut them/damage them? The plastic sheath is pretty sturdy and water resistant. Did you expose the copper wire connections? Have you replaced any wires? Please could you...
  13. This is very strange as the parking sensor...

    This is very strange as the parking sensor connections are water tight and no water ingress should cause the faults shown on the 1st scan. Does it happen as soon as the parking sensors are engaged or...
  14. As I previously asked can you delete ALL FAULTS...

    As I previously asked can you delete ALL FAULTS and run a new scan please. This will assist us to help you

    Thanks
  15. Replies
    5
    Views
    200

    Buy yourself a cable. You're not only paying for...

    Buy yourself a cable. You're not only paying for a wire but the support! It's not actually expensive. One visit to the dealers these days costs almost the same as an enthusiast's cable. They don't...
  16. Hi Please could you clear all the faults and...

    Hi

    Please could you clear all the faults and post a new scan. This will allow us to see what faults are actually there.

    Thanks
  17. Replies
    13
    Views
    343

    Mmm. When you press the button can you hear the...

    Mmm. When you press the button can you hear the motor spinning? If so then it's likely to be mechanical, if not then it's a case of removal and testing the wires for power.
    Sometimes removal and...
  18. The issue is likely related to the gateway,...

    The issue is likely related to the gateway, testing of the BCM didn't produce any issues. Try flashing it back to AA and re-paramaterise.
  19. Oh dear. Try and locate the source of the water...

    Oh dear. Try and locate the source of the water leak and plug that too.
  20. It's difficult working out a way without the...

    It's difficult working out a way without the Gateway throwing up an error. There is a different method you can use where a memory chip is wired onto the start/ stop button that 'remembers' the last...
  21. It's going to be a case of trial and error. Try...

    It's going to be a case of trial and error. Try activating:
    IDE04159-Deactivation of start-stop function,Mode not active ,1
  22. Yes that's correct. STG is short for steuergerät...

    Yes that's correct. STG is short for steuergerät which is German for module. So you are correct and 19 is CAN GATEWAY or J533.
  23. The gateway is new in this model and there is...

    The gateway is new in this model and there is currently not a known method to disable it.

    Please post a map of STG19 so we can see what adaptations there are.

    Thanks
  24. Replies
    5
    Views
    144

    Post it on this website.

    Post it on this website.
  25. Replies
    13
    Views
    343

    Can you post a scan please. If the motor's gone...

    Can you post a scan please. If the motor's gone it should point to an electrical failure
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4