Search:

Type: Posts; User: grant@gendan

Page 1 of 14 1 2 3 4

Search: Search took 0.05 seconds.

  1. The clusters look different. Does your cluster...

    The clusters look different. Does your cluster support this graphic? Sometimes only the higher spec clusters show all the graphics and others have a more basic screen.
  2. Replies
    11
    Views
    189

    With the engine off the MAP should read...

    With the engine off the MAP should read atmospheric pressure (you can look this value up online for where you are located). This is a good starting check.
    When idling the pressure usually drops...
  3. Replies
    18
    Views
    345

    A DPF won't normally regen if you have Engine...

    A DPF won't normally regen if you have Engine fault codes. If you fix your engine fault, then the DPF should be able to regen and reduce the measured soot mass.
    Otherwise, I suspect there is still a...
  4. Or even post an autoscan using the latest...

    Or even post an autoscan using the latest version...
  5. Did you clear the fault codes before running the...

    Did you clear the fault codes before running the learn procedure?
    I can see there are ABS fault codes and voltage level faults in other systems. It may be picky about running the learning procedure...
  6. Thread: Hello

    by grant@gendan
    Replies
    12
    Views
    662

    You seem to have a number of Supply voltage...

    You seem to have a number of Supply voltage (terminal 30) issues showing in the (09) Central Electric module.
    These need to be investigated and fixed.
    Was the guide you followed definitely for your...
  7. Hi, My understanding is that it is the rotary...

    Hi,

    My understanding is that it is the rotary control shown in this video:
    https://youtu.be/3LqY9KIa7zI

    I believe I spoke to the OP on the telephone and suggested posting an AutoScan here....
  8. Replies
    19
    Views
    819

    Here is an example coding value from another 2013...

    Here is an example coding value from another 2013 VW CC (09) Central Electric module:


    0008000000000000008800809400294023570088402205206484C7200040

    Make sure you save your original code (shown...
  9. Replies
    11
    Views
    506

    Did you clear your ABS fault codes before posting...

    Did you clear your ABS fault codes before posting the Scan?
    As Uwe commented, you have several systems referring to ABS faults but no codes in the ABS.
  10. Thread: Long code

    by grant@gendan
    Replies
    5
    Views
    314

    What problems are you experiencing? If you can...

    What problems are you experiencing?
    If you can post an autoscan with some details of the problems, there are some very knowledgeable people on here who may be able to correct some coding problems.
  11. Replies
    5
    Views
    579

    I may not be the best person to provide an...

    I may not be the best person to provide an unbiased answer :).
    That said, all the official UK stockists are good people and all will look after you.

    Please give me a call if I can help answer...
  12. Replies
    5
    Views
    579

    Hi, For a 2019 model, you will need a HEX-V2...

    Hi,

    For a 2019 model, you will need a HEX-V2 or HEX-NET.
    If it is just the one car you are looking to cover, I recommend the HEX-V2 (3-VIN).

    You can probably sell your HEX+CAN interface for...
  13. Replies
    19
    Views
    819

    The parking sensors not activating and the...

    The parking sensors not activating and the reverse lights not working are probably linked.
    Has the transmission electrical switch failed for the reversing light?

    Can you see reverse being...
  14. This link shows several procedures to try:...

    This link shows several procedures to try:
    https://www.ross-tech.com/vag-com/cars/vw-remote-matching.html
  15. Conti injectors with 6 character code need an...

    Conti injectors with 6 character code need an additional zero added at the end
  16. To run the fuel pump, have you tried: [01 -...

    To run the fuel pump, have you tried:

    [01 - Engine] > [Basic Settings - 04] > Select 'Fuel Supply Pump Activation' from drop down list.

    or

    [01 - Engine] > [Output Tests - 03] > Select 'Fuel...
  17. Replies
    40
    Views
    1,679

    I think the calibration procedure for the ACC...

    I think the calibration procedure for the ACC Radar is pretty complex. My understanding is that you need a calibration rig with reflectors etc.
    VCDS may be able to start the procedure but I imagine...
  18. Replies
    2
    Views
    334

    What tool are you reading these codes with? If...

    What tool are you reading these codes with?

    If it is not VCDS, you need to contact the supplier of your tool for support.
    This forum section is primarily for answering pre-sales questions on VCDS.
  19. Replies
    2
    Views
    197

    Maybe try again in Fall or Winter :) Sorry,...

    Maybe try again in Fall or Winter :)

    Sorry, could not resist.
  20. Replies
    13
    Views
    1,639

    Sticky: Hi all, This looks interesting and I would...

    Hi all,

    This looks interesting and I would like to start recommending it to some UK VCDS Customers (if that is ok).
    One small issue before I can promote it, the site does not have a Privacy...
  21. From your post, it sounds like you may have...

    From your post, it sounds like you may have already seen the Ross-Tech Wiki page on this but here is the link for reference:...
  22. Are you seeing sensible live values for Fuel...

    Are you seeing sensible live values for Fuel Pressure in Measuring Blocks?
    If you click the Advanced Measuring Values button, it should show a list of live data offered and hopefully you can find...
  23. I don't think you need the SKC for this...

    I don't think you need the SKC for this procedure. You will most likely need the 'Security Access - 16' code for the Engine to perform an adaptation.

    Some examples are shown in this post:...
  24. Thread: Upgrade

    by grant@gendan
    Replies
    3
    Views
    591

    Hi Ivor bigun, Upgrades in the UK tend to only...

    Hi Ivor bigun,

    Upgrades in the UK tend to only be available on the new Unlimited VIN interfaces. If you are looking to just cover 2 cars, then the 3-VIN HEX-V2 is your best option (approx 225)....
  25. Replies
    2
    Views
    403

    Please can a moderator correct the thread title?...

    Please can a moderator correct the thread title? I posted too hastily and now can't correct the title to the required format.
    Thank you.
Results 1 to 25 of 336
Page 1 of 14 1 2 3 4