Search:

Type: Posts; User: DrPeter

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. Hello, The ECM may not run the Basic...

    Hello,



    The ECM may not run the Basic Settings when there are fault codes. You can run the Output Tests to hear/feel if the N205-Camshaft Adjustment Valve clicks on/off, do this with the key...
  2. Big Bears don't cry.... Big Bears don't cry....

    Hi there....

    Went to the woods and found "dabear" looking sad, so I tried to ask what was wrong... :p


    https://youtu.be/t_8cJjrdTs4

    drpeter
  3. Replies
    2
    Views
    64

    Hello, Have you seen this Ross-Tech wiki...

    Hello,



    Have you seen this Ross-Tech wiki page? Basic Setting for Hydraulic Unit Intake Valves / Hydraulic Unit Disconnecting Valves


    We also have a video that will help too....
  4. Replies
    7
    Views
    167

    - Sometime a 'running' compression test can help...

    - Sometime a 'running' compression test can help you 'see' if there are any valve train concerns.

    If you have never performed this test, it is easy to do.
    - Remove a spark plug (one cylinder at a...
  5. Hello, The Auto-Scan is a bit difficult to...

    Hello,

    The Auto-Scan is a bit difficult to look at, next time please "copy & paste" the Auto-Scan from the text file rather than "copy & pasting" from the printed file. :)

    I do see that...
  6. Hello, "You can't have your cake and...

    Hello,




    "You can't have your cake and eat it (too)" or at least I do not think you can.

    It would appear that the Audi engineers (and lawyers) may be trying to cover their assists and...
  7. Replies
    7
    Views
    167

    Hello, Here is a long shot, try clearing the...

    Hello,

    Here is a long shot, try clearing the [01-Engine] fault codes three times in a row, in less than 30 seconds with the key on, the engine off. Then cycle the ignition off for about 10...
  8. Hi, I have a question, was the engine or the ECM...

    Hi, I have a question, was the engine or the ECM or VIN number changed?

    By VIN [WVWZZZ1KZ5P107694], the vehicle (built 05/2005) should have a [BKD] engine code, a 2,0L TDI engine that fits VW Golf...
  9. Replies
    3
    Views
    108

    Hello, You could clean the Throttle Body,...

    Hello,

    You could clean the Throttle Body, then perform the Basic Settings for the Throttle Body adaptation using VCDS, Basic Settings group [060].

    We have a Ross-Tech wiki page for the P2015...
  10. Replies
    9
    Views
    261

    Hello, - Thanks for posting your...

    Hello,





    - Thanks for posting your question, make sure you register your VCDS tool, so you can become a verified user here.

    Yes, use the same coding of the old/original J492 controller...
  11. Replies
    1
    Views
    213

    Hello, It depends. . .. It looks like you...

    Hello,

    It depends. . ..


    It looks like you have been asked to post an Auto-Scan in the past, but...???

    It would be very helpful when asking questions in the Ross-Tech forum, to post an...
  12. Hello, If this is a bluish color...

    Hello,




    If this is a bluish color smoke??, this would typically be caused by oil leaking (over night?) into the combustion chambers, most likely from leaking valve stem seals or valve guide....
  13. Hello, The coolant fans will run when there...

    Hello,

    The coolant fans will run when there is either a command from the ECM and the 15-power (key on power) is present or there is ONLY one of the following present:
    - 15-power to the J293
    -...
  14. Replies
    11
    Views
    547

    Hi there.... So sorry about all the...

    Hi there....

    So sorry about all the confusion, I have revised the matrix based on all the feedback..

    How is this one? ;)


    https://i.imgur.com/Rrvfjil.jpg
  15. Replies
    7
    Views
    186

    Hello, I would have a look at the Measuring...

    Hello,

    I would have a look at the Measuring Value Block group [002], field (1) is current the Voltage supply value as seen by the controller. This value needs to reflect the current battery...
  16. Replies
    11
    Views
    547

    Engine Coolant - There is a Difference!!

    Engine Coolant - There is a Difference!!


    The Volkswagen Group now has several different types of engine coolants and I suspect with time and the introduction of newer (electric vehicles?) this...
  17. Replies
    6
    Views
    163

    Hello, To answer your question, there is a...

    Hello,



    To answer your question, there is a Basic Setting group [123] that is used to perform the "Exhaust Gas Recirculation (EGR) Valve (G212/N18) Adaptation".

    - You should not need a...
  18. Have you checked with the dealer or you can try...

    Have you checked with the dealer or you can try this website, www.partslink24.com. Both placed you will need the VIN.

    drpeter
  19. Replies
    4
    Views
    195

    Hello, Thank you for posting your...

    Hello,




    Thank you for posting your question and the Auto-Scan. The fault codes below can set when there is a concern with the G676-Gear Sensor.

    ref:
    P179E 00 - Selector Lever Sensor:...
  20. Replies
    7
    Views
    215

    Hello, Cool! - Glad the coding of the...

    Hello,

    Cool! - Glad the coding of the [55-Headlight Range] / (J745 controller) worked for you, thanks for the feedback.






    As far as the V319-Right adaptive cornering lamp motor, the...
  21. Hi there, Nice find, the Volkswagen Group...

    Hi there,

    Nice find, the Volkswagen Group does recommend replacing the coolant as per the maintenance schedule and to use the proper coolant for the vehicle!!
    'Important: NOT ALL coolant types...
  22. Hello, Thanks for posting the vehicle's...

    Hello,

    Thanks for posting the vehicle's Auto-Scan! By the way, the VIN says this is a 2017 WAUZZZF44HA040130 [H = 2017]

    Date of production: 21.07.2016
    Model year: 2017

    I would suggest...
  23. Replies
    7
    Views
    215

    Hello, While we are waiting for an...

    Hello,



    While we are waiting for an Auto-Scan, please try and recode the [55-Headlight Range] controller with the same coding.
    [Software Coding: 021A01010B000400]

    The coding in this...
  24. Hello, Thanks for posting the Auto-Scan, we...

    Hello,

    Thanks for posting the Auto-Scan, we have a Ross-Tech wiki page for that fault code in the Transmission controller, see below.

    P0741 - Torque Converter Clutch: Stuck OFF / No Power...
  25. Hello, Thank you for sending the requested...

    Hello,

    Thank you for sending the requested information.

    Have a look at the Measuring Value blocks below from your log. it would appear that the 5v ref in MVB-002 is okay.

    In MVB group [062]...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4