Search:

Type: Posts; User: darkchina811

Page 1 of 20 1 2 3 4

Search: Search took 0.15 seconds.

  1. Replies
    12
    Views
    232

    I believe we're all curious, aren't we? you could...

    I believe we're all curious, aren't we? you could post the scans into the non-broken section ;)
  2. ... autoscan?

    ... autoscan?
  3. they need to be run in sequence. in between is...

    they need to be run in sequence. in between is when you turn the screws on the headlights.
  4. any particular reason why you replaced a 2016 BCM...

    any particular reason why you replaced a 2016 BCM with a 2020? the SW might not be "aligned" to other modules in the car and there might be minor things not working.

    when I started retrofitting, I...
  5. Kufatec's loom does have a cable that is supposed...

    Kufatec's loom does have a cable that is supposed to connect to the fuesboard (that should link to that 6x pin connector on the J345 module) that I didn't connect. Their instructions said it was...
  6. you did not post an autoscan so we don't know...

    you did not post an autoscan so we don't know what sensor you have. RLHS won't support rain closing, you need a RLFS.
  7. Replies
    18
    Views
    2,279

    @ Ronaldo I have a friend with an A3 who...

    @ Ronaldo

    I have a friend with an A3 who installed the same TPMS and of course is not seeing temperatures. we would like to replicate your CAN gimmick if you are willing to disclose/share hardware...
  8. Replies
    7
    Views
    101

    B528 is already a splice point, means that the...

    B528 is already a splice point, means that the wire can go somewhere else, means that you'd probably find B528 on another page of the wiring diagram.

    just find the wire and splice anywhere along...
  9. Replies
    7
    Views
    101

    that's correct, you splice into the wire,...

    that's correct, you splice into the wire, anywhere you find it / anywhere convenient.
  10. Replies
    115
    Views
    13,471

    well, nothing is happening until I reunite with...

    well, nothing is happening until I reunite with the car in the middle of May, I am looking at options since I have plenty of time.

    I have a VIN from a Golf 1.4 with factory DCC but we don't have...
  11. Replies
    115
    Views
    13,471

    I contacted a couple of guys and got one answer...

    I contacted a couple of guys and got one answer that gives hope but I find difficult to believe.

    he said all is needed is buy another Driving Profile official kit and run the SVM with the code...
  12. please post an adaptation map of module 09, we...

    please post an adaptation map of module 09, we only need to tell the BCM your license plate lights are now LED modules.
  13. what about FeC restore?

    what about FeC restore?
  14. perfect, so just follow downtime's suggestion. ...

    perfect, so just follow downtime's suggestion.

    slightly off topic: it was my belief that TJA is only supported by the later 3Q0 model camera. since I also have the 5Q0 with index G, how can I...
  15. try downgrading the A5 camera to index F, that's...

    try downgrading the A5 camera to index F, that's what the factory would have installed if you had bought the car with the feature.
  16. the error in 13 ACC is the same I had, that will...

    the error in 13 ACC is the same I had, that will clear when you calibrate the camera.

    for the rest I trust downtime, but I want to add that I would consider downgrading the A5 rather than...
  17. how can you expect us to advertise and recommend...

    how can you expect us to advertise and recommend you to buy another diag cable which is a competitor to VCDS?

    I am also kind of disappointed that our cable cannot do some advanced stuff but there...
  18. you won't get much luck here. your dealer can...

    you won't get much luck here. your dealer can download it from erWin upon providing the car's VIN. if they're friendly enough they won't even charge you.
  19. Tiguan is MQB so it's all the same, DCC module...

    Tiguan is MQB so it's all the same, DCC module has no coding and very little adaptations to play with. what you're trying to accomplish needs tampering with the dataset or firmware, it's advanced...
  20. good job. if only I had rear doors :D

    good job. if only I had rear doors :D
  21. my parents have an Octavia with no Kessy and it...

    my parents have an Octavia with no Kessy and it works like that, any of the 3 memories you store gets remembered to the current keyfob.

    the official scan tool of a dealer, named ODIS, has a guided...
  22. you don't need KESSY, seat memory is associated...

    you don't need KESSY, seat memory is associated to whatever keyfob is in the ignition when you store the seat settings. so if your wife has another keyfob, when she unlocks the car the seat will move...
  23. ok you replaced the radar, now there is nothing...

    ok you replaced the radar, now there is nothing you can do with VCDS. go back to dealer to clear Component Protection and have the FeC restored into the new radar. until you do this it will NEVER...
  24. when I retrofitted my A5 and I was waiting for...

    when I retrofitted my A5 and I was waiting for calibration, I had an error which would not clear in module 13, the ACC radar, but 17 was happy. just saying.

    for the amp, dealer should have had...
  25. no basic settings for the A5 can easily mean no...

    no basic settings for the A5 can easily mean no calibration, so that's ok for now.

    for the cluster we need to see the error, we'll probably get rid of it.

    for the 5F, if the amp was a OEM one...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4