Search:

Type: Posts; User: dnoermann

Page 1 of 3 1 2 3

Search: Search took 0.01 seconds.

  1. Replies
    6
    Views
    77

    For example this one here: ...

    For example this one here:
    https://forums.ross-tech.com/showthread.php?13832-Want-ESP-TC-Button-in-my-2017-Caddy-abs-mk100-coding&p=125271&viewfull=1#post125271

    found with this search string,...
  2. Just did the Test with HEX-V2. The coding change...

    Just did the Test with HEX-V2.
    The coding change in CCS is working as expected now.
    So this is prooven: T6 EU6 ECU's DCM6.2 from DELPHI can only be coded with the new HEX-V2.

    Thanks to Uwe
  3. Just did a test with an old VCDS interface and i...

    Just did a test with an old VCDS interface and i get always 0x31 in ECU.
    So this looks like an old interface issue.
  4. Whell that sound strange. You can not change...

    Whell that sound strange.
    You can not change anything in the ECU ?
    Whell 90% of coding can not be changed this get's blocked by ECU Firmware, but something must work, i will try with my spare one...
  5. The T6 is PQ25, no FEC/SWAP are needed for CCS...

    The T6 is PQ25, no FEC/SWAP are needed for CCS Activation.
    However VCDS does have some issues to enable the Coding in the EU6 ECU's in the T6.
    A lot of users get 0x31 when they try to enable CCS in...
  6. The PQ25 BCM is good documented in VCDS. Do get...

    The PQ25 BCM is good documented in VCDS.
    Do get an overview, just look @ google pictures ......
  7. Whell, in generall the Labeling of LongCoding...

    Whell, in generall the Labeling of LongCoding Bits in VCDS must be seen as good guess of the functionality ...
    Because it is only found by reverse trying out and rengeneering the functionality ......
  8. So, another MK100 ABS Coding challenge :) We...

    So, another MK100 ABS Coding challenge :)

    We have good Faith that
    - Byte 04 is Break Configuration on that MK100 ABS versions
    - That this is "cheksummed" some where in a later Byte by inverting...
  9. Replies
    26
    Views
    579

    ABS/ESP is not reachable in one scan of you....

    ABS/ESP is not reachable in one scan of you.
    Probably an Electrical Error in wiring ?
    This needs to be fixxed fist .. :)

    Still the same, ABS/ESP and ECU are unhappy that the SteeringWheel Sensor...
  10. Replies
    26
    Views
    579

    Du solltest versuchen den Fehler im...

    Du solltest versuchen den Fehler im Lenkwinkelsensor zu beheben, eventuell ist der Fehler im Motorsteuergerät nur ein Folgefehler davon.
    Das Motorsteuergerät mekert ja nur das es einen Fehler von...
  11. I think you need to change the Door Modules and...

    I think you need to change the Door Modules and the BCM to get this running.
  12. This is not working with all combinations of BCM...

    This is not working with all combinations of BCM and Door Modules.
    I have Door Modules with ending "J" with them it works for example ....
  13. Replies
    11
    Views
    2,343

    So, for PQ25/PQ35 Car's with Component Protection...

    So, for PQ25/PQ35 Car's with Component Protection Master inside the Cluster i figured out the Code.
    You need a ACC Radar and Cluster which are already configured with the right Swap Codes and CP...
  14. Replies
    10
    Views
    443

    ACC-high ==> ACC with max cc Speed 210 km/h ...

    ACC-high ==> ACC with max cc Speed 210 km/h
    ACC-low ==> ACC with max cc Speed 160 km/h
  15. Replies
    36
    Views
    1,939

    Did you clear DTC in 13 ? Acc (13) is...

    Did you clear DTC in 13 ?
    Acc (13) is complaining about Communication errors to every other ECU.
    Is ACC switched on earlier than the rest ?
  16. Replies
    21
    Views
    4,512

    @Sebastian: Just stumbled over your Post. Any...

    @Sebastian: Just stumbled over your Post.

    Any more news regarding the Issues with the T6 BCM ?
    I can confirm this behaviour with my T6 BCM.

    Part No SW: 7E0 937 090 C HW: 7E0 937 090 C
    ...
  17. You are Welcome. The fun Part will be installing...

    You are Welcome.
    The fun Part will be installing the Wire into the ABS ....
    You will have to take a lot stuff apart in the front to get that done.
    Been there, done that :)
  18. The Set Taster is an option :) To Enable TPMS...

    The Set Taster is an option :)

    To Enable TPMS just change coding of ABS Byte 12 set Bit 4.
    In Speedo you need to enable TPMS, too, this bis is labeled in VCDS.

    To Set the OK State, you can use...
  19. Correct, the POLO Guide will work with T5 Model...

    Correct, the POLO Guide will work with T5 Model Year 2010-2015 it is the same Model PQ25.
    MFSW will work, too.
    For CCS you will need the Stalk, CCS as Button in MFSW will not work.
    For CCS wou...
  20. Replies
    12
    Views
    613

    Whell, be the first :)

    Whell, be the first :)
  21. Replies
    12
    Views
    613

    Hallo Alex, cool retrofit attempt. Whell i dont...

    Hallo Alex, cool retrofit attempt.
    Whell i dont know if the T5.2 BCm can do this, but the BCM does have a Coding bit to enable TP1.6 on Engine Can.
    See Picture from VCDS coding here....
  22. You need to change the Coding in SMLS and ECU....

    You need to change the Coding in SMLS and ECU.
    The Bits should by Named in VCDS.
    Remove The Bit @ Adaptive Cruise, or so ...
    Probably you have to Change the Stalk from ACC to CC, too. But i think...
  23. Replies
    7
    Views
    437

    In VW PQ25/PQ35 this is possible. In addition to...

    In VW PQ25/PQ35 this is possible.
    In addition to what Uwe said, you need to change the MFSW from ACC one to the CCS one.
    And do some coding changes.
    I would think that this will be simmilar @...
  24. Just in the Front like in the T6. ...

    Just in the Front like in the T6.

    http://noernet.de/T5.2_ACC.jpg
  25. Replies
    4
    Views
    335

    That ABS PUMP you need, connect it and read out...

    That ABS PUMP you need, connect it and read out the Coding.
    This coding needas to be puttet into the new Pump.
    That is it.
    Or you use the Coding that you will find in your VCDS Autoscan, which you...
Results 1 to 25 of 72
Page 1 of 3 1 2 3