Search:

Type: Posts; User: NZDubNurd

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. Replies
    15
    Views
    259

    That's even closer to me! Start digging and just...

    That's even closer to me! Start digging and just veer slightly north near the end :thumbs: There's a Polo at the Pick-a-part near me ;)

    Bring your swimming togs - there's hundreds of beaches and...
  2. Replies
    15
    Views
    259

    That's pretty darn close to me :D Mine comes...

    That's pretty darn close to me :D

    Mine comes out here though:

    https://i.imgur.com/eUGULZJ.jpg
  3. The fans fail often - the brushes get clogged up...

    The fans fail often - the brushes get clogged up and stick in their holders. That usually results in the "Movement Restricted / Jammed" fault

    I dismantled mine, cleaned out the crud and freed them...
  4. Untick "Auto trans" in the CAN Gateway...

    Untick "Auto trans" in the CAN Gateway installation list, for a start.

    The Engine ECU will most probably need to be changed to a manual version (or possibly flashed), and the ABS error will...
  5. Worse than Land-Rover and Jaguar :facepalm: ...

    Worse than Land-Rover and Jaguar :facepalm:

    Way back when the Jaguar X-Type was launched, a local motoring Journo listened to the spiel about how Jag was plagued with reliability issues, but...
  6. Replies
    7
    Views
    223

    Surely, even on a manual system, the AC is...

    Surely, even on a manual system, the AC is automatically turned on when you select the "Windscreen" position???

    Cars have been doing that since the 90's!

    That fault code for the air...
  7. Correct - missed a step - the main part is:...

    Correct - missed a step - the main part is: release the air while the pedal is pressed - the air has to be pushed out of the slave - it's not like a traditional piston slave with the bleed nipple the...
  8. I'm not sure. I'd replace it, because they are a...

    I'm not sure. I'd replace it, because they are a pain in the arse to do later! Trans out again!

    People say they're hard to bleed... but I never had the problem.

    I pressure bleed at a lowish...
  9. Is this the 02M style, with the combined bearing...

    Is this the 02M style, with the combined bearing and slave cylinder around the input shaft?

    If you're bleeding it without the engine installed, it'll probably be over extending - You can't feed...
  10. Thread: 09 VW Rabbit

    by NZDubNurd
    Replies
    25
    Views
    589

    For the ABS: I have MK60 ABS, not MK60EC1......

    For the ABS:

    I have MK60 ABS, not MK60EC1... but there are some output tests which run the pump. I'd run it and see if it actually runs. In the MK60, they are a surprisingly crappy looking brushed...
  11. Thread: I need help

    by NZDubNurd
    Replies
    31
    Views
    1,145

    "Somebody" followed the picture, not the text! ;)

    "Somebody" followed the picture, not the text! ;)
  12. Replies
    15
    Views
    1,854

    I like the clones that put extra 0's in the BCM...

    I like the clones that put extra 0's in the BCM coding :D The more you try to "fix" it - the worse it gets ;)

    I suspect that a chunk of the people who buy the clones are the same ones that get...
  13. COMPLETELY different car, but when I put the R32...

    COMPLETELY different car, but when I put the R32 drivetrain into my Touran, I had to use the manual engine ECU, so the ABS wouldn't complain about a missing TCU. Because the engine ECU identified the...
  14. Replies
    18
    Views
    405

    On my Touran, I had to code the BCM to manual,...

    On my Touran, I had to code the BCM to manual, and change the wire from the TCU to permanent ground, as per the manual cars wiring diagram.

    There is probably something similar in yours, but it may...
  15. Replies
    18
    Views
    405

    Doesn't crank, or doesn't start? Doesn't...

    Doesn't crank, or doesn't start?

    Doesn't crank: The engine ECU is still looking for a TCU, has the wiring and/or coding been altered to allow cranking without the trans reporting it's in Park?
    ...
  16. Replies
    3,428
    Views
    1,196,602

    :D Fart leads Police to hiding man...

    :D

    Fart leads Police to hiding man

    :o
  17. Replies
    3,428
    Views
    1,196,602

    ^^^ I'm building a still at home, right now!...

    ^^^ I'm building a still at home, right now! (Legal here in NZ!)
  18. Thread: Clima a3 8p

    by NZDubNurd
    Replies
    41
    Views
    1,073

    I wonder if it's worth water blasting the...

    I wonder if it's worth water blasting the condesnor and get all the crud off?

    The fan on our BMW was huge, plus it had a mechanical one with a viscous coupling on the engine too. It never seemed...
  19. Thread: Clima a3 8p

    by NZDubNurd
    Replies
    41
    Views
    1,073

    Ours felt very hot and cold, in both cars, when...

    Ours felt very hot and cold, in both cars, when it started to fail. It was quite noticable - the temperature was hot then cold and "not right". Even when set to full cold. I guess the valve would...
  20. Thread: Clima a3 8p

    by NZDubNurd
    Replies
    41
    Views
    1,073

    You can run the output tests in the climatronic...

    You can run the output tests in the climatronic system, and check the measurements are running smoothly. It's not normal fot the blending flap seals to fail in these - they are a rubber seal, not...
  21. Replies
    9
    Views
    221

    What HMC said - if the ABS is a problem, then...

    What HMC said - if the ABS is a problem, then everything may communicate OK (except the ABS - duh!)

    Also - RHD means you have to remove the block to get the module off... unless you get really...
  22. Replies
    285
    Views
    10,643

    https://i.imgur.com/2iIzynS.jpg

    https://i.imgur.com/2iIzynS.jpg
  23. Replies
    285
    Views
    10,643

    The spread of Covid-19 is based on two factors: ...

    The spread of Covid-19 is based on two factors:

    1) How dense the population is.

    2) How dense the population is.
  24. Replies
    3
    Views
    536

    7Zap appears to be exactly one of these - useful,...

    7Zap appears to be exactly one of these - useful, but probably not a site I'd trust with anything legal or money related!
  25. YAY! Best go look for what mr PinPointDiag said...

    YAY! Best go look for what mr PinPointDiag said then: vacuum leaks and/or carbon build up, cam timing. All known potential issues
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4