Search:

Type: Posts; User: siLc

Page 1 of 20 1 2 3 4

Search: Search took 0.05 seconds.

  1. Replies
    7
    Views
    167

    I vaguely remember the retrofit from anything...

    I vaguely remember the retrofit from anything else to a 090 BCM needed wiring work - running additional battery powers to the BCM, which it appears to be currently missing.

    There should be threads...
  2. Replies
    58
    Views
    4,049

    If the measuring blocks are correct (you could...

    If the measuring blocks are correct (you could try searching again if anything with a similar description exists), I would try unplugging a sensor and seeing if an appropriate DTC is logged and if...
  3. Replies
    7
    Views
    167

    Dealers usually insist on installing a component...

    Dealers usually insist on installing a component which is appropriate to the particular vehicle as per VIN and which the factory diagnostic tool will adapt to the vehicle without fuss.

    What BCM...
  4. Replies
    2
    Views
    71

    This is only the installation list, please post a...

    This is only the installation list, please post a full autoscan. Into 6th gear at approximately 55-60km/h is normal and doing basic settings probably won't improve it. Does it shift harshly from 1->2...
  5. No problem! A horse trailer puller? I've only...

    No problem!

    A horse trailer puller? I've only pulled light trailers (750kg fully laden) with my 2011 Passat B7 CNG and it felt like torturing the DSG clutches while maneuvering :) My ex-Swedish...
  6. Is this info for the 6-speed DQ250 DSG? Don't...

    Is this info for the 6-speed DQ250 DSG? Don't think this applies to the 7-speed DQ200...
  7. Well, there were some improvements to the CDGA...

    Well, there were some improvements to the CDGA engine on the B7 but if the swapped B6 engine itself is running fine, why bother for now? I hope you at least changed the timing chain on the replaced...
  8. Lot of things to address, lets get going... ...

    Lot of things to address, lets get going...

    First, please post all autoscan data using the English language version of VCDS. You can install it besides your Swedish version. Most people able to...
  9. Replies
    13
    Views
    258

    If I remember correctly, your retrofits have been...

    If I remember correctly, your retrofits have been quite OEM but this 3x power strip in the passenger footwell doesn't look very OEM to be honest :/
  10. Replies
    58
    Views
    4,049

    You can check the measurement blocks for the side...

    You can check the measurement blocks for the side sensors. Do they indicate plausible distance values?
  11. Replies
    51
    Views
    934

    In zero or auto position with xenons off - LED...

    In zero or auto position with xenons off - LED DRL should be full bright.
    In auto or lights on position with xenons on - LED DRL should be less bright.
    In parking light position, LED DRL should be...
  12. Replies
    7
    Views
    257

    Vehicle is FWD and has self-parking and it only...

    Vehicle is FWD and has self-parking and it only takes one type of rear ABS sensors (left) - WHT 003 859A (supersedes to WHT 003 859B). Did you try these?
  13. Address 4F: Centr. Electr. II (J520) ...

    Address 4F: Centr. Electr. II (J520) Labels:. 1K0-907-532.clb
    Part No SW: 7N0 907 532 HW: 7N0 907 530 AN
    Component: EZE_2 H56 1663
    Revision: H56 Serial number:...
  14. Replies
    51
    Views
    934

    I'm not very familiar with DCC but chances are if...

    I'm not very familiar with DCC but chances are if DCC is made happy again by fixing this issue, the xenon leveling might be one step closer to working.


    01769 - Sensor for Vehicle Leveling; Front...
  15. There is no energy management and hence, no...

    There is no energy management and hence, no battery coding, on a Passat B6.
  16. Replies
    7
    Views
    14,218

    https://www.drive2.com/l/538296979654967321/ ...

    https://www.drive2.com/l/538296979654967321/

    Have a look. I once went over this using Google Translate and there should be something pertaining "tolerance" ranges which can be read from the TCM...
  17. There's reason to believe that there is some CAN...

    There's reason to believe that there is some CAN communications trouble with the TCM. If able and feasible, you could try to obtain a test mechatronic unit - you can plug it in without installing it...
  18. If the test unit was operational otherwise, you...

    If the test unit was operational otherwise, you can try swapping (desolder-solder) the displays from your old unit to the test unit.
  19. Check the TCM plug for water ingress and failed...

    Check the TCM plug for water ingress and failed connections. It can be found on the gearbox, above the starter.
  20. Replies
    9
    Views
    176

    This is the telematics module. BT is still there,...

    This is the telematics module. BT is still there, at least in the first scan. Mind posting a fresh autoscan?
  21. Thread: Project Q7

    by siLc
    Replies
    4
    Views
    193

    8/12ch parking aids usually want to see 8/12...

    8/12ch parking aids usually want to see 8/12 sensors at all times and can't be made to function otherwise.
  22. Replies
    9
    Views
    160

    On PQ cars such as this, the rear sensors are...

    On PQ cars such as this, the rear sensors are different part numbers for Park Assist equipped vehicles.
  23. Replies
    4
    Views
    178

    Any oil consumption to speak of?

    Any oil consumption to speak of?
  24. Replies
    5
    Views
    204

    There are 3 wires that go from the stalk to the...

    There are 3 wires that go from the stalk to the clocks for MFD functions. Did you run these?
  25. Replies
    10
    Views
    552

    I don't think the B7 front tweeter will fit...

    I don't think the B7 front tweeter will fit because of the different shape of the window triangle.

    Dynaudio midbass speakers can be expensive and are known to fail, so try to get items as new as...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4