Search:

Type: Posts; User: 325_guy

Search: Search took 0.09 seconds.

  1. Update: Success! Using a replacement HSD and...

    Update:

    Success!
    Using a replacement HSD and the "C" hub, I now have CarPlay enabled on both USB outputs.

    The "D" hub I have is defective. Additionally, the HSD cable I was using was...
  2. So, we're going to go back to what worked....

    So, we're going to go back to what worked. 5G0035222E direct to the radio, with no hub. Once the new part gets here I'll see how that works.
  3. Update: I obtained a 5Q0 035 726 socket and a...

    Update:

    I obtained a 5Q0 035 726 socket and a replacement hub, 5G0 035 953C (no rev. D's available).
    No change in condition. USB1 not detected whatsoever, USB2 detects as a device but is not...
  4. Platform is PQ35, Mk5 Jetta (2006). The...

    Platform is PQ35, Mk5 Jetta (2006).

    The screen is the one on the MIB. I realized this weekend also that this may just be an issue of me not understanding the workings of the system. I have a...
  5. Hello all, apologies for the delay! Been out of...

    Hello all, apologies for the delay! Been out of town all weekend.

    Autoscan and admap as requested:



    VCDS
    Windows Based VAG/VAS Emulator Running on Windows 7 x64
    VCDS Version: Release...
  6. MIB2 PQ Adaptation- Disable Screen Auto-Dim

    Iím surprised I canít find this setting. Iíd like to disable auto dim of the screen when the headlights are on. The basic user-accessible display brightness and day/night/automatic settings have no...
  7. To the hub: Pin 1- +12v constant (spliced to...

    To the hub:
    Pin 1- +12v constant (spliced to KL30 supply)
    Pin 2- Ground (spliced to KL31 supply)
    Pin 4- +5v from MIB2 (direct pin to C3 on the quadlock)
  8. Further testing: With the hub-to-radio cable...

    Further testing:

    With the hub-to-radio cable flipped 180* (for crossover):
    VCDS still shows the 1637- Interface for External Media error (error cleared, then reappears).
    USB1 doesn't detect...
  9. The ports are 5KD035726A, no electronics in them....

    The ports are 5KD035726A, no electronics in them. HSD cables are all straight through. I was already tracking the crossover for the radio-to-hub, but not the USB2! Thanks for that!

    I want to make...
  10. This is what I've done or observed with...

    This is what I've done or observed with adaptations prior to posting:

    IDE10480-MAS10741-Interface for external media: activation-Connection 1,activated (already activated) ...
  11. 5G0035953D- CarPlay enabled USB sockets required?

    The MIB2 to MkV Jetta saga grew a new twist. I chose to install the 3-port USB hub, 5G0035953D, instead of the single USB port for easier integration in the MkV cockpit. Carplay was previously tested...
  12. Replies
    3
    Views
    171

    You guys (and this forum!) are awesome! Thank you.

    You guys (and this forum!) are awesome! Thank you.
  13. Replies
    3
    Views
    171

    MIB2 PQ Ignition Off Behavior

    Good morning! Can somebody with the MIB 2 verify the system behavior when left powered on with power supplied, engine off?

    I have one that I just applied the CP hardware patch to and in bench...
  14. Thanks to all for the tips! Once I get some time...

    Thanks to all for the tips! Once I get some time I'll pull that pin from the gateway plug and tape it back.

    Working on these cars is so interesting. On one hand, it's neat how modular and common...
  15. I presume it matters which one? And removing that...

    I presume it matters which one? And removing that one wire from the gateway will make it forget about trying to find a ghost battery regulator?
  16. ERROR: Adaptation channel not available (or words...

    ERROR: Adaptation channel not available (or words to that effect- forgot to screenshot).

    New observation:
    Changed "Platform" to PQ35, errors for gateway and battery regulator came back. ...
  17. 7N0 907 530 BC CAN Gateway / Persistent Battery Module Problem

    I've updated my gateway in preparation for a MIB2 installation and noticed that with the 7N0 907 530 BC gateway, address 61- Battery Regulator shows up in the installed modules list even though I do...
Results 1 to 17 of 17