Search:

Adaptation Maps

01:


;SW:8V0-906-264-M HW:06K-907-425-B --- Engine
;Component:1.8l R4 TFSI H13 0001, Coding:311900322446002F1000...

DrWife's new ride:

https://i.imgur.com/hGoSLnH.png?2


Tuesday,10,December,2019,22:05:03:14741
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 19.10.0.0 (x64) ...

How I'm using Notepad++ to add
tags in bulk.


https://i.imgur.com/tKYIdYa.png?1
Get files into a single folder, highlight them, right click and then Edit with Notepad++ (make sure you had no...

This begs the question, if the owner can do that, why would they need any help in the first place. That is some higher level "kung fu". :confused: Let us know what they come up with.
...

I think we have a forum rule that if you can answer via meme, then you must....

https://i.imgur.com/i6mLaGS.png

Saturday,07,December,2019,10:19:16:14741
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 19.10.0.0 (x64) HEX-NET CB: 0.4517.4
Data version: 20190930 DS316.0...

Looks like that HPFP isn't doing anything. :( Remove it and verify there is no mechanical wear on the camshaft... if no visual issues found then expect to replace just the HPFP. I'd suggest OE from...

With the engine at idle and up to temp (coolant +80C), what is the data shown in Measuring Block group 106?

Dana, the ABS module is coded. One quick question, real simple. In the ABS module in measuring block group 273, field 3 reads O11O1OOO when I'm driving in reverse at 3MPH, but then reads 1OO1O111...

The original ABS module was dirty so I purchased a replacement unit and installed it. But I didn't run an Auto-Scan first thing, and I set the original ABS module on fire and then buried it in a...

The Burger King I go to (Hungry Jack's for you Aussies) now ask for your name when you order.
https://i.imgur.com/X8TPR1H.jpg?1

Some one will get this.

?? that Auto-Scan formatting is messed up... please just copy/paste, don't output the Auto-Scan to some other format before posting.... it makes it difficult to read over when the formatting is wonky...

You should have something like this:

https://i.imgur.com/alOkAeZ.png

Jack's coding suggestion looks to be the correct one... so 0013698 once you have the correct ABS part number installed.

VCDS has really good documentation built into it for coding these types of ABS modules. Just match up your PR codes, check the boxes as needed and then select the proper engine/trans package from a...

J271, located in relay position "A3", electronics box in left plenum chamber:

https://i.imgur.com/yUg9emZ.jpg?1

You need to have the factory repair manual for the vehicle you are working on. ...

Are you sure you have the correct ABS part number. A 2006 Passat I'd expect to have a "C2" ABS, not a "C4". The soft coding value Jack provided is for the C2 variant.

As per VW/Audi, pretty much every test plan for an electrical item boils down to this: Is the wiring good? If yes, replace said item. Still have issues, replace control module.

Assuming there...

Tacking onto this...

Ignition on, unplug G294

/1 to ground, should be less than 24Ω
/3 to ground, about 5.02 volts
/4 to ground, about 5.65 volts

Also I think Peter was trying to say "and...

Maybe around 2006-ish, there was a need to display our interfaces when we vended at car shows. This was an early prototype display I came up with that was not used:
...

Did anyone run an Auto-Scan BEFORE the ABS coding was lost? If so, here where you will find the info:

https://youtu.be/Vg6m35YlHjk?t=130

If an Auto-Scan was not run prior to ABS coding being...

Are you following these steps?
https://forums.ross-tech.com/showthread.php?4224-MQB-(Mk7-Golf)-Steering-Angle-Sensor-(G85)-Calibration-in-44-Steering-Assist&p=144324&viewfull=1#post144324

Used part warning!!!!
https://forums.ross-tech.com/showthread.php?1997-Can-I-go-with-used-parts-Maybe

And on top of that, I'd expect 02095 - Component Protection Active to happen as well.

I suspect it would be coded to 0304A036. But soft coding is the least of his worries for now...

02095 - Component Protection Active

That needs to go to the Audi dealer to sort that out. I'm...

https://forums.ross-tech.com/showthread.php?101-How-to-post-an-Auto-Scan

When I worked at the dealer, I replaced a good number of aftermarket alternators... they just aren't up to par. IMHO, a good used unit (matching part number) is better than the aftermarket junk out...