Search:

Type: Posts; User: siLc

Page 1 of 19 1 2 3 4

Search: Search took 0.02 seconds.

  1. 9977 or higher is a good indication of the fix...

    9977 or higher is a good indication of the fix being applied.
  2. Replies
    57
    Views
    3,674

    For B7 and 1K8 919 472C, you don't need to change...

    For B7 and 1K8 919 472C, you don't need to change sensors.

    Post a complete autoscan and admap of Discover Media PQ.
  3. No problem! For DM PQ, start with changing the...

    No problem!

    For DM PQ, start with changing the CAN gateway out with version at least 7N0907530BC. Simply buying a vanilla DM PQ won't get you anywhere - Component Protection will kick in after 8...
  4. Factory location for amplifier is under the...

    Factory location for amplifier is under the driver's seat. If you are planning on upgrading the radio eventually to Discover Media PQ, get the 3AA035466 model of Dynaudio amplifier, which is...
  5. Replies
    30
    Views
    357

    Properly retrofitting factory xenons is a far...

    Properly retrofitting factory xenons is a far more involved process than simply replacing the lights and connecting them with plug adapters. For reference, here's what looks like a pretty good guide...
  6. Yes, the TPMS position is exactly the same. I...

    Yes, the TPMS position is exactly the same. I have the same CNG model and have done this retrofit.

    Lower steering column trim with CCS is part number 3C0858559J 1QB.
  7. Replies
    10
    Views
    201

    I wouldn't trust the date given by the fault. As...

    I wouldn't trust the date given by the fault. As far as I know, only a few models keep track of the actual date and mostly display a random date in DTC info. Time of day can be trusted though :)
    ...
  8. AFAIK you don't have to change the steering wheel...

    AFAIK you don't have to change the steering wheel controller if you already have normal cruise and steering wheel buttons. Only the stalks with ACC buttons will suffice.

    TPMS module is installed...
  9. Replies
    4
    Views
    112

    You posted your old radio admaps in another...

    You posted your old radio admaps in another topic. Please ignore my post there and post your old and new radio admaps here.
  10. Also post a full unedited autoscan and admap of...

    Also post a full unedited autoscan and admap of the MIB2.5.
  11. Replies
    10
    Views
    201

    Apparently the BCM "sees" the steering wheel...

    Apparently the BCM "sees" the steering wheel buttons fine but does seem to require coding for the buttons to work...
  12. Replies
    5
    Views
    131

    1. Does the engine timing chain rattle on cold...

    1. Does the engine timing chain rattle on cold startup?

    Please post a full unedited autoscan.
  13. Pedestrian detection is only with 3Q0980653...

    Pedestrian detection is only with 3Q0980653 camera.
  14. Replies
    5
    Views
    201

    If the CAN interface is coded in both A5 and 13...

    If the CAN interface is coded in both A5 and 13 and the A5 fault still remains and ACC is still working, then either there is something wrong with the coding or the CAN connection (CAN-H/CAN-L wires...
  15. Replies
    5
    Views
    201

    Did you run the seperate CAN circuit from A5...

    Did you run the seperate CAN circuit from A5 camera to ACC radar and activated the appropriate option in ACC radar coding? Be advised, when you change the coding, the local databus fault would be...
  16. Well, the autolocking at a low speed is normal...

    Well, the autolocking at a low speed is normal but the unlocking action at every stop certainly isn't :) It should only unlock when removing the key from the ignition.

    There's 2 documented...
  17. Replies
    12
    Views
    392

    The reversing light bulbs are wired to the BCM...

    The reversing light bulbs are wired to the BCM plugs T73c/11 (left) and T73a/64 (right), so...

    ENG116964-ENG116408-Leuchte28RFL LC11-Lichtfunktion B 28,Blinken links Dunkelphase ,16...
  18. Replies
    2
    Views
    140

    With address 5F radio, climate display is no...

    With address 5F radio, climate display is no longer available. With older address 56 radios it still should be available. Though I wouldn't go downgrading my radio for this :)
  19. There should be a documented (it has an...

    There should be a documented (it has an appropriate label) coding bit in module 13 which turns on the sensor fusion CAN interface on the ACC side. After that the databus DTC should clear from A5, but...
  20. Did you run the sensor fusion CAN wires to...

    Did you run the sensor fusion CAN wires to ACC/Front Assist radar? The Local Data Bus DTC could be because of this.
  21. Replies
    12
    Views
    392

    I'm no expert on MQB cars lighting configuration...

    I'm no expert on MQB cars lighting configuration but this sounds like someone may have changed adaptation channels for reverse lights, so they come on with blinkers. Adaptation map from module 09...
  22. Replies
    2
    Views
    109

    Something still appears to be wrong with the...

    Something still appears to be wrong with the instrument cluster - the cluster cannot be reached but the immo is reachable. They are the same physical unit.
  23. Replies
    6
    Views
    192

    Are you sure the clutch tolerances were...

    Are you sure the clutch tolerances were calculated correctly at the time of mounting the new clutch kit? Looking at the DSG software version 2670, why wasn't it flashed to more recent version?
  24. Replies
    7
    Views
    265

    Still, a full autoscan should be posted. This...

    Still, a full autoscan should be posted. This snippet of info says there's a problem with communicating with the blind spot monitoring but we don't know whether the vehicle in question even has it...
  25. Replies
    16
    Views
    705

    Not only autoscan but also admap of module 09.

    Not only autoscan but also admap of module 09.
Results 1 to 25 of 452
Page 1 of 19 1 2 3 4