Search:

Type: Posts; User: UWSCSI

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Trade a Genuine Ross-Tech HEX+CAN Interface

    Hello...

    I have an older Genuine Ross-Tech HEX+CAN Interface that I have used very frequently.
    I tried to connect to my Audi e-tron, but seems like I need an upgrade.
    The trade in option is one...
  2. New cover mounted and everything is ok now. The...

    New cover mounted and everything is ok now.
    The new cover was not oval, so me over-torquing the old cover just cost me 50EUR... When shall I ever learn?

    Thanks for helping me out.
  3. New part has been ordered from the dealer....

    New part has been ordered from the dealer. Hopefully I will get it today.

    The picture should now be visible again. At first I used a "google disk" link, but that only worked for 24 hours or so...
  4. Have i damaged the Cover for the oil filter housing? - YES, I did...

    Hi there...

    Performed an oil change yesterday and also replaced the oil filter of course.
    After this job the oil is pouring out from the housing. It looks like it is from top of the housing,...
  5. Replies
    9
    Views
    522

    Hi guys... I went to the VW dealer and addressed...

    Hi guys... I went to the VW dealer and addressed the problem. They acknowledged the fault and replaced 2 injectors free of charge...
    The car is from 2014 and the VW emmision update was performed...
  6. Replies
    9
    Views
    522

    Thanks for your reply. Do you know why they...

    Thanks for your reply. Do you know why they replace them under warranty? (I need some good points so I can argue my case with my VW dealer).
  7. Replies
    9
    Views
    522

    Thanks for the tip... The circuit tester with...

    Thanks for the tip... The circuit tester with bulb shows me that the ECU is firing the injector.
  8. Replies
    9
    Views
    522

    Injector: Cylinder 3 - Circuit Malfunction

    Hello...

    So, my VW Caddy with a 1.6 TiD engine is not doing well. Engine is running rough and has poor acceleration/lack of power.
    Connected my VAG-COM and it is pointing out injector no 3.
    I...
  9. Replies
    1
    Views
    341

    00778 - Steering Angle Sensor (G85)

    Greetings from Norway...

    I have some issues with the steering on a VW Polo 9N from 2003.
    The steering wheel was off by approx 20 degrees and the ESP indicator light went on.
    This seems to be...
  10. I have read on some forums that to perform this...

    I have read on some forums that to perform this calibration have had some positive impact on cranky transmission, so I thought it was worth a shot.
    If you disagree, then I will have to send my car...
  11. Well, I have som issues with going from R to D,...

    Well, I have som issues with going from R to D, it is like the transmission is lagging for 0.2 s before it works again. Happens now and then. Also, sometimes when in reverse, I get a smell from the...
  12. Well, that does not help me...

    Well, that does not help me...
  13. That's not good... I thought VCDS was the...

    That's not good... I thought VCDS was the ultimate tool for this...
    Where can I obtain ODIS? Do I need a new OBD adapter and the SW?
    Will this product do the trick?
    [Edit: Link removed. Do not...
  14. OK. As I read through the forum and S-tronic...

    OK. As I read through the forum and S-tronic related topics, I notice that most threads just keep hanging without any answer to their problems.
    Are not VCDS able to perform the Clutch valve...
  15. Any help would be much appreciated...

    Any help would be much appreciated...
  16. What does "Erase counter for start and stop...

    What does "Erase counter for start and stop processes" do actually?
  17. Monday,29,January,2018,20:01:55:19306 VCDS --...

    Monday,29,January,2018,20:01:55:19306
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86
    VCDS Version: 18.1.0.2
    Data version: 20180122 DS285.1
    www.Ross-Tech.com


    VIN:...
  18. 7-Speed S-Tronic Direct-Shift Gearbox (DSG/0B5) calibration

    Hi there... I am trying to follow this procedure (http://wiki.ross-tech.com/wiki/index.php/7-Speed_S-Tronic_Direct-Shift_Gearbox_(DSG/0B5)), but it fails in step one "Erase counter for start and stop...
  19. 16684 - Random/Multiple Cylinder Misfire Detected

    Just finished servicing an Audi A4 (8E) and it has some engine fault codes that are returning.
    Is there some more tests or fault finding to be performed or should the coils be changed right away?
    ...
  20. Label files from Control module 08 and 56 has...

    Label files from Control module 08 and 56 has been sent to support.
    Hope to see some work done on them soon.

    RD
  21. That did not do the trick... Basic Settings in...

    That did not do the trick...
    Basic Settings in group 001 is still unavailable when engine is off.
    I noticed from the scan: Address 08: Auto HVAC (J255) Labels: Redir Fail!
    What does "Labels: Redir...
  22. Hmm.... The engine was actually running when I...

    Hmm.... The engine was actually running when I tried to perform the calibration of the flaps...
  23. Yes, but that is the problem... Basic setting in...

    Yes, but that is the problem... Basic setting in group 001 is not available...
  24. Address 08: Auto HVAC (J255) Labels: Redir...

    Address 08: Auto HVAC (J255) Labels: Redir Fail!
    Part No SW: 8T1 820 043 AQ HW: 8T1 820 043 AQ
    Component: KLIMA 3 ZONEN H08 0171
    Revision: C1000000 Serial number:...
  25. [08] - Heating/Air Conditioning on Audi Q5 (8R)

    It looks like there is something wrong with the Climatronic system on my Audi Q5 (8R).
    The air from the vents is either hot or cold when trying to regulate the temperature.
    21 degrees C settings...
Results 1 to 25 of 27
Page 1 of 2 1 2