Search:

Type: Posts; User: Jef

Page 1 of 20 1 2 3 4

Search: Search took 0.08 seconds.

  1. Replies
    2
    Views
    100

    Any reason why you suspect the ground point for...

    Any reason why you suspect the ground point for the ABS module? I'm not doubting you, but wondering why you suspect it right away? It is possible that if there is a poor electrical/mechanical...
  2. I'm not saying Jack is correct, but the data...

    I'm not saying Jack is correct, but the data ain't passing the sniff test as it were. Your cluster has crapped out and there are very suspicious signs of foul play. I would say at face value the...
  3. Replies
    8
    Views
    235

    If ALL of the injectors were just replaced at the...

    If ALL of the injectors were just replaced at the Audi dealer, then they shouldn't be bleeding out.... with an engine up to temp, shut it off, remove oil cap and take a big phat whiff of the crank...
  4. Replies
    8
    Views
    235

    So just rounding off the numbers, it would seem...

    So just rounding off the numbers, it would seem the engine idles at 4000 kPa (40 BAR) of rail pressure. And if I read your post correctly, hot engine (coolant +80C) the rail pressure didn't beak...
  5. Replies
    8
    Views
    235

    All the parts that you've installed.... are they...

    All the parts that you've installed.... are they from the Audi dealer or are they parts NOT from the Audi dealer?

    Start with something simple, fuel rail pressure testing. With the engine up to...
  6. Replies
    4
    Views
    146

    I know of fuses but I'm not sure I understand...

    I know of fuses but I'm not sure I understand your question... What issue are you trying to resolve? Can you provide an Auto-Scan w/VIN so we can have more information about the vehicle?
  7. Replies
    16
    Views
    3,174

    ST?ID=90809 2006 A3, front and rear wipers not...

    ST?ID=90809

    2006 A3, front and rear wipers not working, front and rear washers dead as well. Seems we get the call after the J527 and J519 have been replaced.

    J527, look at MVB data, can see...
  8. Thread: MK60EC1 ABS FAQ

    by Jef
    Replies
    1
    Views
    143

    Reply as per Dana

    Reply as per Dana
  9. Thread: MK60EC1 ABS FAQ

    by Jef
    Replies
    1
    Views
    143

    MK60EC1 ABS FAQ

    This is the starting point of the MK60EC1 FAQ. If you need help with your MK60EC1 ABS module, then start a new thread in the Car Repair Support section.

    (info on the advanced ID)

    Relevant...
  10. Replies
    3
    Views
    123

    https://forums.ross-tech.com/showthread.php?19569-...

    https://forums.ross-tech.com/showthread.php?19569-Eos-Top-Operation-via-Basic-Settings-(DO-NOT-DO-THIS)

    Read over the warnings... twice.

    It is on my to-do list to make a video on this topic,...
  11. Replies
    7
    Views
    279

    Correct. There is no address 61 for Battery...

    Correct. There is no address 61 for Battery Regulation , and address 19 CAN Gateway doesn't have any subsystems, so no battery regulation happening there as well.

    You just need to drop in a...
  12. Thread: ASR and MIL light

    by Jef
    Replies
    2
    Views
    147

    Yep. The "Load Signal" is based on data from the...

    Yep. The "Load Signal" is based on data from the MAF... no MAF, no Load Signal. On the MAF, /2 is power from fuse S234. This fuse powers other things but there are no codes for them, so I suspect...
  13. Thread: Audi Q7 MMI

    by Jef
    Replies
    4
    Views
    232

    How did you trace the problem down to that module?

    How did you trace the problem down to that module?
  14. Replies
    4
    Views
    148

    0004529: 2.0l TDI (PR-T1E/TB3/TR0/TQ0) ...

    0004529:

    2.0l TDI (PR-T1E/TB3/TR0/TQ0)
    All-Wheel-Drive Manual Transmission (PR-G0L)
    FN3 Teves 15" (PR-1LB/1LE)


    Running your VIN, as per PL24:

    Base engine TR0 4-cylinder diesel engine...
  15. Replies
    3
    Views
    150

    Thank you for posting a full Auto-Scan! :thumbs:...

    Thank you for posting a full Auto-Scan! :thumbs: Now you know why to always run the Auto-Scan first thing. :banghead:

    I come up with 0013602 for the ABS coding. You'll find information on...
  16. Well, at least it wasn't a missing fuse....

    Well, at least it wasn't a missing fuse. :eek:

    And it isn't like any one of us would of guessed that (wonky fuel gauge) off the top of our collective heads. You may feel silly, but don't knock...
  17. I'm away from my access to technical information,...

    I'm away from my access to technical information, but i suspect your might be able to hit the lift pump with direct battery power. If so, then give that a try and see if you gawd awfulz low fuel...
  18. MVB groups 103 and 106 should have fuel pressure...

    MVB groups 103 and 106 should have fuel pressure readings. What are those pressures during cranking?
  19. Replies
    0
    Views
    119

    2-019 A5 Cabrio, 2.0T CYMC

    Thursday,17,October,2019,16:18:52:56403
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 19.6.2.0 (x64) HEX-NET CB: 0.4513.4
    Data version: 20190930 DS308.0...
  20. Take a look at fuse SC29, make sure the terminals...

    Take a look at fuse SC29, make sure the terminals for that fuse have good bite onto the fuse blades... while you have that fuse out, replace it. If still having issues, unplug airbag module and...
  21. Some wonky SRI was most likely done. This thread...

    Some wonky SRI was most likely done. This thread is relevant:

    https://forums.ross-tech.com/showthread.php?1874-Audi-Q3-fault-code-1048578-No-Basic-Setting

    Thing get interesting around post #17...
  22. The text in red I added, the older HEX+CAN isn't...

    The text in red I added, the older HEX+CAN isn't able to deal with that kind of data, but our HEX-NET and HEX-V2 customers would see that.

    So at face value, looks like you've got a bad airbag...
  23. Replies
    8
    Views
    230

    We have your email, but we'd rather do this on...

    We have your email, but we'd rather do this on the forum so other people can chime in and also for the next person that has this issue can possibly find answers. Please post your Auto-Scan here.
    ...
  24. Not to be a Jack here... but how do you know...

    Not to be a Jack here... but how do you know compression is good? 1700 is just a number on the odometer, not an indication of compression. You've got an engine that doesn't fire, one must check the...
  25. How is the compression? Do you have spark? If...

    How is the compression? Do you have spark? If you spray a little bit of starter fluid into the intake during cranking, does it fire? Does the tachometer show RPM during cranking?
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4