Search:

Type: Posts; User: NEtech

Page 1 of 20 1 2 3 4

Search: Search took 0.08 seconds.

  1. Change it as I wrote. [Options] [User...

    Change it as I wrote.

    [Options]
    [User Interface and Identification]
    write numbers for wsc, importer, device no.
    For example: 12345 123 23456
    [Save]
    [Close VCDS]
    Start VCDS
  2. I assume MFSW retrofit, is correct done, and...

    I assume MFSW retrofit, is correct done, and correct for CC.

    VIN is important!
    Is it an Non UK car (import)?
    If not, I don't understand why it Engine is coded for steering left side Byte 5 Bit 0...
  3. Replies
    8
    Views
    172

    If you in such a hurry, why not tell us upfront,...

    If you in such a hurry, why not tell us upfront, what you have tried :confused:
    Else try 0003365
    Use numbers in WSC etc. [Options]
  4. Replies
    8
    Views
    3,035

    It is a very simple search/compare, nothing sql...

    It is a very simple search/compare, nothing sql or something like that.

    I check which file is biggest, that goes on the left side (I asume it has most lines).
    I just take one line at a time, so...
  5. Replies
    9
    Views
    275

    I think these 3 channels, should be changed to...

    I think these 3 channels, should be changed to shown values.
    43 Maximum Distance to Service km x100 > 300
    44 Maximum Time to Service Days > 730
    54 Basic Time Value for...
  6. Replies
    2
    Views
    159

    It is SwaP, ask you VW dealer.

    It is SwaP, ask you VW dealer.
  7. IDE00512-ESI: minimum value km-driving...

    IDE00512-ESI: minimum value km-driving distance/inspection, > 15000 km
    IDE00827-ESI: minimum value of time between inspections, > 365 d
    IDE01153-SIA: maximum value of distance to service, > 15000...
  8. I normally don't look at thread without VIN, no...

    I normally don't look at thread without VIN, no use if it is not possible to check PR codes.
    For Sedan try 408000748101
    Most of the other coding is available, also Variant model at Byte 3.
  9. Replies
    8
    Views
    3,035

    { 20.02.1} { New Acronyms added} { New...

    { 20.02.1}
    { New Acronyms added}
    { New controller for Battery history}
    { 20.03.0}
    { New Acronyms added}
    { Model info corrections}
    { Program action button failure improved}
    { First test for...
  10. Replies
    6
    Views
    201

    Could you please show which YouTube show basic...

    Could you please show which YouTube show basic setting on intake throttle on a diesel ?
    You can use [Output tests-03].

    As far as I can see, your problem is intake manifold flaps.
    Either to big...
  11. Test: 43F84876997E00D4C2291231992B0079170500C1

    Test:

    43F84876997E00D4C2291231992B0079170500C1
  12. Adaptation Channel 019 in BCM, see wiki...

    Adaptation Channel 019 in BCM, see wiki.
  13. Try Coding [09] Byte 17 Bit 2

    Try Coding [09] Byte 17 Bit 2
  14. Yes, I think that should be correct for this...

    Yes, I think that should be correct for this model also.
  15. Well as far as I can see, your engine controller...

    Well as far as I can see, your engine controller should be supported.
    Post an Autoscan with latest Data version 20200210.
  16. Try and install the latest version from here...

    Try and install the latest version from here.
  17. Yes I know that, that is defined that way, right...

    Yes I know that, that is defined that way, right now in our label files.
    But right now I think it is wrong and should be showed as in #4.
  18. Similar has also been mentioned here before...

    Similar has also been mentioned here before.
  19. I have looked through about 50 scan's I have with...

    I have looked through about 50 scan's I have with this controller, I guess there is a little problem with label file.
    I think it should be like this, so you should not change coding.
    ...
  20. With VCDS choose Controller Address 14: Susp....

    With VCDS choose Controller Address 14: Susp. Elect.
    [Adaptation-10]
    In channel box write: 110
    Press [Read]
    Wait a little a yellow help is showed.

    You can also write channel 080 or 081 and...
  21. And the channels 1, 2, 3, 4, 5 and 110 are...

    And the channels 1, 2, 3, 4, 5 and 110 are documented.
    Channel 110 is cold boot.
  22. You can choose Experimental Coding, there it is...

    You can choose Experimental Coding, there it is shown.
  23. Replies
    4
    Views
    456

    Best to use WD. Door controllers are just...

    Best to use WD.
    Door controllers are just connected to each other, with LIN.
  24. I would think you have to do this: Login...

    I would think you have to do this:


    Login for Coding
    Do coding (same coding)
    Login for coldstart
    Do coldstart (Adaptation) see pop-up help
    Calibrate headlights.
  25. Are you 100% sure you have connected the brake...

    Are you 100% sure you have connected the brake pipes, the exact place as it is original?
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4