Search:

Type: Posts; User: Jack@European_Parts

Page 1 of 20 1 2 3 4

Search: Search took 3.66 seconds.

  1. Good bye Odo ...

    Good bye Odo
    ...
  2. Is VCDS configured for tester number, WSC and...

    Is VCDS configured for tester number, WSC and Importer number?

    Is it possible you bumped something and didn't realize it?
  3. It really won't and if it did it would self bleed...

    It really won't and if it did it would self bleed right at recirculating weeps in first commencement of injection since CR.
  4. Replies
    9
    Views
    183

    Stabilant 22A? Did you check spring tension...

    Stabilant 22A?

    Did you check spring tension of plug's to BCM?
  5. Now do you see why I ask if you took measurement...

    Now do you see why I ask if you took measurement or reference the RTFB? I know to you and maybe sometimes others, this is not what you want to hear, however, at least I think I'm consistent for the...
  6. Replies
    4
    Views
    45

    Hello Chris and welcome to the VCDS forum! Did...

    Hello Chris and welcome to the VCDS forum!

    Did you know I have found that many things have been reported to cause such codes and not just a sensor but a bad ground, feed power or terminal relay,...
  7. Replies
    13
    Views
    264

    That last readiness test is EVAP/LDP, did you...

    That last readiness test is EVAP/LDP, did you know they share that bit test & you can run them manually in VCDS?

    0x01-04-070 EVAP
    0x01-04-071 LDP
  8. Replies
    5
    Views
    93

    Did you know tests for voltage with DVOM are...

    Did you know tests for voltage with DVOM are inadequate, tests for current are required?


    https://m.youtube.com/watch?v=bEHzvZDJpns&feature=youtu.be
  9. Replies
    13
    Views
    264

    Have you looked for the oil is most likely from...

    Have you looked for the oil is most likely from adjuster gaskets ( half moon ) or round seal plug behind camshafts, no?

    Did you know you can qualify each OXS oxygen sensor in VCDS by doing...
  10. I think you are misunderstanding my questions and...

    I think you are misunderstanding my questions and I'm not trying to be sarcastic here.

    If the sensor will show as specified disconnected & as you said, this implies the mechanical sensor position...
  11. Sure sounds like a faulty TV or wire harness huh...

    Sure sounds like a faulty TV or wire harness huh but still no auto-scan why?
  12. Don't you understand the difference between...

    Don't you understand the difference between MECHANICAL not in VCDS?
    See this is what happens when people think everything can be done with a scanner?
  13. Yes, however, what about the value it should read...

    Yes, however, what about the value it should read in VCDS blocks versus the actual control arm suspension location as measured for mechanical basic setting in RTFB?
  14. Which is why I am asking about mechanical...

    Which is why I am asking about mechanical settings...........
  15. You seem annoyed with my questions and direction...

    You seem annoyed with my questions and direction to information to keep you safe, why, is it just shear impairment/impatient?

    Well I see trying to conduct a repair without the manual as foolish...
  16. Thanks for dismissing me when trying to refer you...

    Thanks for dismissing me when trying to refer you to good questions to ask yourself or information to do so for self reliance, huh?

    I see the pattern....do you?

    Magic answers or instruction you...
  17. Did you follow the links or hover the acronym...

    Did you follow the links or hover the acronym with cursor?
  18. Welcome to the VCDS forum OP! Do you have...

    Welcome to the VCDS forum OP!

    Do you have RTFB?

    http://wiki.ross-tech.com/wiki/index.php/Official_Factory_Repair_Information

    Did you try to change the calibration to a useful adaptation and...
  19. I can back trace it & too give you insight as to...

    I can back trace it & too give you insight as to what happened when unit is in my custody, however, since you have the car it would be wise to verify.

    I'm thinking not related to air ride or fuse...
  20. You can commence a purchase if you like and send...

    You can commence a purchase if you like and send in core for data transfer & so unit is plug and play.

    Let's verify why for sure this happened and not speculate okay?
    ...
  21. Show the collective in WD and a picture of visual...

    Show the collective in WD and a picture of visual damage in ECU could you please?

    https://i.postimg.cc/52KCJw9M/20191207-163813.jpg


    That was fast, so now the WD and did you trace back the pin...
  22. https://thumbs.gfycat.com/RarePerfectIndochinahogd...

    https://thumbs.gfycat.com/RarePerfectIndochinahogdeer-size_restricted.gif
  23. FOD WINS! ...

    FOD WINS!

    http://fodprevention.com/wp-content/themes/figero/images/fod-control-signs-risk-series.png

    You have the wrong module installed sir, don't you see that and the replacement part number...
  24. Replies
    5
    Views
    93

    How did you measure the voltage or current, do...

    How did you measure the voltage or current, do tell please? :rolleyes:
  25. WRONG MODULE INSTALLED SIR CANT YOU SEE THE...

    WRONG MODULE INSTALLED SIR CANT YOU SEE THE AFOREMENTIONED?


    https://www.youtube.com/watch?v=0Rl9Cxc7uZA
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4