Search:

Type: Posts; User: Danners74

Page 1 of 5 1 2 3 4

Search: Search took 0.01 seconds.

  1. Aye it most definitely is Uwe. So what your...

    Aye it most definitely is Uwe. So what your saying is it could be a steering angle issue G85? which If its correct is in the rack?



    Regards Danners
  2. SKODA 2014 EA288 ENGINE STEERING LIGHT COMMING ON LOSS OF POWER STEERING

    First post for a while but wondering if any body has any info please? Car sporadically loses steering with light on ESP lamp lit. Takes a few ignition cycles to clear it. A few recent ish scans. It...
  3. Replies
    10
    Views
    347

    Refer to my thread on 3B Passat water leaks for...

    Refer to my thread on 3B Passat water leaks for the root cause of your problem.
  4. Hot bolt paste...….ive done a few.

    Hot bolt paste...….ive done a few.
  5. Replies
    12
    Views
    1,048

    G13 pfffffft. The EVO is for the E-TRON all...

    G13 pfffffft. The EVO is for the E-TRON all electric,RS5,6,7 models with thermostat issues. there are no current plans yet in UK to roll out across entire range yet as when first released it was...
  6. Hello there. back in those days in the ...

    Hello there. back in those days in the dealership as a MT the main drain issues were software issues with 56 Radio depending on which unit. I may be able to source the correct level of software but...
  7. Replies
    25
    Views
    845

    Is the exhaust leak free a the flexi joints? What...

    Is the exhaust leak free a the flexi joints? What fuel are you using?
  8. Replies
    5
    Views
    1,727

    Any body? its driving me crackers

    Any body? its driving me crackers
  9. Replies
    5
    Views
    1,727

    TOURAN WILL NOT ADAPT KEYS

    Good morning. trying to adapt new remotes and the Convenience will not let me do this via adatation 01. I enter the amount of keys id like to adapt and it just keeps saying 0.


    ...
  10. Replies
    7
    Views
    2,908

    Yes they are variable displacement. Check the gas...

    Yes they are variable displacement. Check the gas content first around 525grammes should be in there. The compressor is more than likely the cause. They shear on the pulley end. Rather pants idea.
  11. Replies
    2
    Views
    1,864

    Sorry dude the 1.8 S-tronic is a wet type clutch....

    Sorry dude the 1.8 S-tronic is a wet type clutch. Due to the power output of the vehicle it could never support a dry clutch set up. It would tear them to shreads.
  12. Perhaps trying this http://www.durametric.com/...

    Perhaps trying this http://www.durametric.com/ its what all the Porsche techs like to use in the dealers. The Cayenne is pretty similar in its EPB set up. Why are you trying to code it?
    The coding...
  13. Good afternoon. Just like to say many thanks to...

    Good afternoon. Just like to say many thanks to you DANA! I watched the video on how to carry out the grind in procedure. Carried it out as I looked at the MVB's for grind in distance-they hadn't...
  14. Morning yes loads of data sorry I saved a fair...

    Morning yes loads of data sorry I saved a fair few........tiredness took over last night. Thanks though Dana I will give it a go later today. Much appreciated.
    I was wondering though........surely...
  15. UWE? do you have any ideas?

    UWE? do you have any ideas?
  16. Replies
    639
    Views
    158,104

    here here.........................

    here here.........................
  17. 7P TOUAREG PARKING BRAKE WILL NOT BASIC SET,HELPPPPPPP

    Hello all. Ive got this right pain of a job. 2012 Touareg with EPB issue. Shoes, discs and pads were changed.......NOT by myself. Initally had a a fair few faults in the memory with park brake motors...
  18. Guys there are no clutches to speak of on these...

    Guys there are no clutches to speak of on these any more. That's what the N280 is for on the compressor. That's PWM'd and have swash plates inside on some. Do check the spindle as stated as they do...
  19. Injectors run at approx 160 volts max 40 to 60...

    Injectors run at approx 160 volts max 40 to 60 amps i only know this from doing the courses, and i have the SSP403.Supplementary pump V393 approx 5 bar of pressure with decent battery. High pressure...
  20. Replies
    38
    Views
    15,408

    Hopefully you have all the tools to set it up?...

    Hopefully you have all the tools to set it up? There are 2 variants on the chain tensioner also. I have repair instructions...... regards Danners
  21. Replies
    6
    Views
    8,464

    Sounds like you have a wiring issue there for the...

    Sounds like you have a wiring issue there for the HPP to be open circuit and all the rest cam sensor etc. They do get a bit tight round there.
  22. After market HID are supposed to be failed on the...

    After market HID are supposed to be failed on the MOT test as most them have no headlamp washers or any self levelling devices. Plus, normally they're the chavvy little tikes that blind you when...
  23. I would say mechatronics all day on these. Doing...

    I would say mechatronics all day on these. Doing the basic settings on road test is not part of the service...(UNFORTUNATELY)

    GRRRRRR dealers.
    Kind regards Danners
  24. [QUOTE=TFSI;94980] Try ignition on and put...

    Try ignition on and put lights on. Then tape the main beam on permanently using masking tape to the steering wheel. This should help. I used to do loads of these in the dealer using this method.

    ...
  25. I recoded the Gateway module as it was coded for...

    I recoded the Gateway module as it was coded for LHD instead of RHD VEHICLES. I did this via the long coding.
    Weird I thought id replied yesterday.
Results 1 to 25 of 109
Page 1 of 5 1 2 3 4