Search:

Type: Posts; User: Uwe

Page 1 of 20 1 2 3 4

Search: Search took 0.41 seconds.

  1. Do you have appropriate optical targets(s) set up...

    Do you have appropriate optical targets(s) set up in front of the car with the required precision?

    -Uwe-
  2. Replies
    8
    Views
    41

    Why would they? You can't have negative fuel...

    Why would they? You can't have negative fuel consumption, right? :D


    TBH, I'm not sure whether 95% or 105% is the direction you want to go.

    -Uwe-
  3. Thread: Testbench setup?

    by Uwe
    Replies
    138
    Views
    77,756

    I think pretty much any 1K-type CAN gateway will...

    I think pretty much any 1K-type CAN gateway will talk to an RNS510 if it's all wired properly. Early ones would cause the car to have battery drain problems when an RNS510 was installed, but that's...
  4. Check this Adaptation channel in your BCM at...

    Check this Adaptation channel in your BCM at address 09:
    ENG141649-ENG116587 -- Außenlicht_Blinker - Komfortblinken Blinkzyklen

    If it has a 3 in it, change try it to 4.

    -Uwe-
  5. Replies
    8
    Views
    41

    In your Instrument Cluster, there should be an...

    In your Instrument Cluster, there should be an Adaptation channel called:
    IDE00499 -- Display correction of consumptions and operating range (%)

    I would guess it's currently set to 100%. Try...
  6. Replies
    8
    Views
    41

    In the upper right-hand corner of pretty much any...

    In the upper right-hand corner of pretty much any page (while you're logged in), clock on Settings.
    That will take you to a page with a vertical menu on the left hand side.
    In the My Settings...
  7. Replies
    1
    Views
    28

    Hi and welcome. Looks like you bought a...

    Hi and welcome.

    Looks like you bought a VCDS-Lite license in 2010 and upgraded to a HEX+CAN in 2012. :thumbs:

    -Uwe-
  8. Replies
    15
    Views
    5,656

    Not a lot of useful info in the above scan since...

    Not a lot of useful info in the above scan since there's no communication with the TCU, not by VCDS, not by the car's Gateway, nor it's ECU, etc...

    -Uwe-
  9. Replies
    7
    Views
    88

    If you had a current cable, you could just make...

    If you had a current cable, you could just make MVB maps, and I doubt it would be difficult to script that too loop it. Then it would repeatedly record all the measuring blocks from the ECU.

    -Uwe-
  10. Replies
    8
    Views
    41

    I will try to help you with this once you put a...

    I will try to help you with this once you put a link to an Auto-Scan from your car in your forum signature. It has become too tedious for me to have to go through your posting history and try to...
  11. IMO, the problem is not the tire size. ...

    IMO, the problem is not the tire size. Different tries size is what distance impulse number could compensate for (but only for the instrument cluster) and shouldn't kill the cruise control, because...
  12. Replies
    1
    Views
    20

    [Applications] [Optical Bus Diagnostics...

    [Applications]
    [Optical Bus Diagnostics]

    Please post the results.

    -Uwe-
  13. Well that was a lovely first post here except for...

    Well that was a lovely first post here except for one thing: The scan was from a clone/pirate copy of VCDS.

    Getting help in this forum requires the use of a legitimate VCDS system.

    They...
  14. He registered his (genuine) system a few days...

    He registered his (genuine) system a few days ago, but did not include "please check forum status" with his registration. :rolleyes:

    Now I just double-checked, and I found him, and verified him. ...
  15. Been here?...

    Been here?
    http://wiki.ross-tech.com/wiki/index.php/Audi_A5_(8T)_Active_Steering

    -Uwe-
  16. Replies
    328
    Views
    129,046

    Sticky: What makes you think you were ever Verified? ...

    What makes you think you were ever Verified?
    All five of your posts are in sections of the forum that do not require verification.
    We have no record of a customer using the e-mail address...
  17. Replies
    11
    Views
    8,000

    It looks like he hasn't been here since early in...

    It looks like he hasn't been here since early in 2017. :(

    -Uwe-
  18. Replies
    3
    Views
    92

    I doubt that. The only mechanism I can think...

    I doubt that. The only mechanism I can think of for a charger to damage a module is with excessive voltage, but I'd expect to have seen some "voltage too high" codes in other modules if that...
  19. Replies
    7
    Views
    140

    Yes, modules that use the UDS protocol do not...

    Yes, modules that use the UDS protocol do not support the old-school Measuring Blocks function. Use Advanced Measuring Values instead.

    -Uwe-
  20. Replies
    12
    Views
    284

    Since byte 18 is not currently masked with '00',...

    Since byte 18 is not currently masked with '00', I doubt there's much harm in it.

    -Uwe-
  21. Replies
    9
    Views
    105

    You'll do that next time, right? ;) By all...

    You'll do that next time, right? ;)


    By all means, please post it, and here's what Dave mentioned:
    https://forums.ross-tech.com/showthread.php?1029

    -Uwe-
  22. Replies
    3,238
    Views
    1,016,766

    I came across this pic randomly: ...

    I came across this pic randomly:

    https://i.imgur.com/8nU22gI.jpg

    And I met the same crab with an attitude earlier this year:

    https://i.imgur.com/h8TwaMd.jpg

    "Nope, I'm not running away,...
  23. The cluster does not have a fault that is in any...

    The cluster does not have a fault that is in any way emissions-related, nor would the fault prevent emissions-related faults or warnings from showing up, nor would it even prevent service reminders...
  24. No, because it's nothing but a dang reminder, and...

    No, because it's nothing but a dang reminder, and that fault code indicates the cluster believes some channels are "out of sorts".


    Is there anything in the EPA or DOT regulations that require...
  25. Moved again, to Car Repair Support. Please...

    Moved again, to Car Repair Support.

    Please post an Auto-Scan so people can see what HVAC controller this car has.

    -Uwe-
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4