Search:

Type: Posts; User: cu52

Search: Search took 0.00 seconds.

  1. I do have contiunuity via Audio, cannot find my...

    I do have contiunuity via Audio, cannot find my better multimeter, but this one showed 1 ohm in the continuity test. That is from the ODB 2 reader to Pin #46 of ABS module.
  2. Engine and trans back in. I can connect to both...

    Engine and trans back in. I can connect to both with no issue, but have removed TCU (6 MT swap). I have K line voltage at the ABS module. last scan attached (TCU unplugged and front clip not...
  3. Still have no connection to ABS. Tried 3...

    Still have no connection to ABS. Tried 3 different modules. Not sure what I need to do now or what other troubleshooting I can do. CEL shows no connection to Stering angle sensor or ABS module.
  4. The other ABS module did connect in the parts...

    The other ABS module did connect in the parts car. I currently cannot test it there again. I grabbed another module today (condition unknown) to test.

    Should I be seeing CAN voltage to the ABS...
  5. Turns out the first info I got was wrong...

    Turns out the first info I got was wrong...
  6. Continuity from ODB2 pin 7 and 46 of ABS Yes ...

    Continuity from ODB2 pin 7 and 46 of ABS Yes

    I Have power at pin 1 for ABS.

    Just found I might need power at pin 50, which does not. both fuses that serve that appear to be good. Trying...
  7. ABS - No Connection issue 04 allroad Bosch 5.0

    Short version 04 allroad 4.2 doing a manual swap: Car has never communicated with ABS since I owned it. No ABS lights, or issues on the cluster. Pulled engine, did timing chain package,...
Results 1 to 7 of 7