Search:

Type: Posts; User: Jetta ,97

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. Replies
    9
    Views
    198

    Since you have Error when you press TEST, Most...

    Since you have Error when you press TEST, Most likely you have wrong PIn.
  2. Replies
    9
    Views
    198

    That is Good , so not Immo Off in ECU. When you...

    That is Good , so not Immo Off in ECU.
    When you enter Pin , and you go to Ch21 , when you chnage value to #2 , do you press TEST?
  3. Replies
    17
    Views
    604

    I still did not get all answers, Read my post...

    I still did not get all answers, Read my post again?
  4. Replies
    9
    Views
    198

    Go to 01-Engine Adaptation ch 91 and post...

    Go to 01-Engine
    Adaptation
    ch 91 and post value????
  5. Replies
    17
    Views
    604

    The Question is it is 5 or 6 speed? Is it clutch...

    The Question is it is 5 or 6 speed?
    Is it clutch brand new good brand or used and if is 6 speed did you replace clutch bearing assembly ( this will be slave cylinder and bearing assembly)?
    Also...
  6. Thread: Removing dtc

    by Jetta ,97
    Replies
    5
    Views
    186

    For your original problem EGR, Can you please go...

    For your original problem EGR, Can you please go back at exhaust pipe and see do you have black soot at it ?
  7. Replies
    13
    Views
    1,619

    Only of is pedal faulty, but he said he checked...

    Only of is pedal faulty, but he said he checked it already.I never see ASV makes it to go in limp mode. This car has Electronic EGR at front of the intake as well , maybe you confusing this with it.
  8. Replies
    13
    Views
    1,619

    This s TDI , there is no Throttle body . TDI has...

    This s TDI , there is no Throttle body . TDI has ASV which will not cause limp mode.


    100% Agree. This is most likely root of the problem.
  9. Pull out fuel filter and see do you have any...

    Pull out fuel filter and see do you have any rust, or metal shaving in it .
    This very common problem with CR engines.
  10. Replies
    5
    Views
    235

    Just copy /paste that coding in ABS . If you do...

    Just copy /paste that coding in ABS .
    If you do not know how then read how to use VCDS on Ross-Tech website .
  11. It is VR6 ,possible need software update for...

    It is VR6 ,possible need software update for CAT.

    JACK we need you here :D:D:D
  12. ^^^^^^^ X2 here . It clearly say on Video ,...

    ^^^^^^^
    X2 here .
    It clearly say on Video , "type number in new value is how many remotes you have" , they say TEST , SAVE then click lock (or you can even press unlock it does not make difference)...
  13. Does it your car lock/unlock all doors and make...

    Does it your car lock/unlock all doors and make beep when you insert key in door lock?
  14. Replies
    8
    Views
    248

    Black and silver cluster face , Speed , Tach ,...

    Black and silver cluster face , Speed , Tach , Temp and fuel gauge scale is not same , it will be off set.
  15. Replies
    8
    Views
    248

    Cluster will work ,I have done many of them....

    Cluster will work ,I have done many of them.
    Use Immobilizer 3 cluster matching procedure and you should be Ok if you have both SKC , from original and form 2005 cluster.
  16. Replies
    11
    Views
    462

    1. Ok, What happen when you put that other ECu in...

    1. Ok, What happen when you put that other ECu in car , does it car start and turn off after 2-3 sec or has same problem as original , just cranking ?

    2. For this problem :



    Clear codes...
  17. Replies
    2
    Views
    253

    Red light is probably because of this problem :...

    Red light is probably because of this problem :


    Address 44: Steering Assist Labels: 1Kx-909-144-G2V2.clb
    Part No: 1K1 909 144 J
    Component: EPS_ZFLS Kl.5 D04 1606
    Shop #:...
  18. Replies
    7
    Views
    262

    Most likely you have UDS protocol car , and as...

    Most likely you have UDS protocol car , and as mention above those cars do not have 08-MBV , you have to choose Advance Measuring block.
  19. I said this so many times , 2006 and up VCDS can...

    I said this so many times , 2006 and up VCDS can not program keys in Mk5 platform . I tried this 100 times and never worked.
    Not even to delete old keys and program just one original key like OP...
  20. I agree that poor tool was used to program either...

    I agree that poor tool was used to program either immobilizer key or Km. But it will not effect nothing.
  21. Second, Sometimes when you recode module with...

    Second, Sometimes when you recode module with exactly same coding fix problem. With long coding helper you can not recode right a way with same coding because it will not let you do it, you have to...
  22. Try recode ECU with some different option , then...

    Try recode ECU with some different option , then recode it back to original coding .It may work.
  23. Your best solution will be Vw Dealer .

    Your best solution will be Vw Dealer .
  24. Even with correct wiring diagram You need to have...

    Even with correct wiring diagram You need to have Cluster to get wake up signal .
  25. Replies
    11
    Views
    434

    It is most likely cluster problem. Very common on...

    It is most likely cluster problem. Very common on early Mk5 , I Replaced so many of them.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4