Search:

Type: Posts; User: downtime

Page 1 of 20 1 2 3 4

Search: Search took 0.23 seconds.

  1. You can remove the excess menus from 5F module...

    You can remove the excess menus from 5F module adaptations. Gen2 menu items. PDC change eto not active and so on.
  2. Exactly like he said. Then you probably need...

    Exactly like he said.

    Then you probably need to do stop end adaptations as well.

    1. Start the car
    2. Turn the steering wheel full left and keep it against the limit until you hear a beep
    3....
  3. Replies
    11
    Views
    377

    Read this one :...

    Read this one : https://forums.ross-tech.com/showthread.php?14359-2014-15-MK7-Golf-MQB-ACC-system-faults

    The MQB radars all seem to have a bit different basic setting algorithms. It seems that the...
  4. Replies
    19
    Views
    1,987

    If you have the label file. Open lcode.exe from...

    If you have the label file. Open lcode.exe from Ross tech vcds folder. Paste your cecm coding there and click on open file. Now choose the label file you want and load it. You are now presented with...
  5. Replies
    11
    Views
    377

    Picture is not showing up. The dropbox is not a...

    Picture is not showing up. The dropbox is not a good pic sharing service. Try something like flickr.
  6. Replies
    19
    Views
    1,987

    So only option to upgrade to BCM unit. Doable but...

    So only option to upgrade to BCM unit. Doable but needs a bit more preparation than your average retrofit.
  7. New autoscan with my brand spanking new HEX V2...

    New autoscan with my brand spanking new HEX V2 cable. Now all the modules are shown correctly.



    Tuesday,13,August,2019,18:16:05:18875
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows...
  8. Replies
    11
    Views
    377

    Go to module 13 -> Security settings. Use code...

    Go to module 13 -> Security settings. Use code 20103. Then open Basic settings and choose reset alignment position or zero alignment position (or something like that), press GO. That should remove...
  9. I hope it’s not you car diced and sliced on the...

    I hope it’s not you car diced and sliced on the picture ��. Seriously, nice picture. Shows very well what is hidden behind the bumper.
  10. Look, I know what they are, what they look like...

    Look, I know what they are, what they look like and how they are mounted.

    They’re NOT mounted to the bumper. They’re mounted to car chassis behind the rear bumper.

    If your car has blind spot...
  11. Do you have easy open trunk? Maybe those are the...

    Do you have easy open trunk? Maybe those are the sensors for that? Really hard to make out from the picture where it is taken from.
  12. Do you have RCTA on? I don’t see 3C in your...

    Do you have RCTA on? I don’t see 3C in your autoscan so I don’t think those are BSD radars. The BSD radars are mounted behind rear bumper, not inside the car.

    This is BSD and RCTA radar :
    ...
  13. No, no and no to your questions. First, the...

    No, no and no to your questions.

    First, the detection area of the pdc sensors is too short and narrow for this kind of detection.

    Then installing BSD system without mirror indicators. No as the...
  14. Where are you getting the power to it? Make sure...

    Where are you getting the power to it? Make sure it’s not direct from battery but from terminal 15 power source (ignition).

    I’ve never actually thought about it that how hot the camera gets....
  15. Yeah I know TJA uses ACC. What I tried to wrote...

    Yeah I know TJA uses ACC. What I tried to wrote was that I'm not so sure if you have to have an ACC module that has specific support for it. Only thing I did to my Tiguan to enable traffic jam assist...
  16. Good work. Check software version management...

    Good work.

    Check software version management error is the easiest to get rid of. Instructions here :...
  17. Heh, okay in that context I can understand the...

    Heh, okay in that context I can understand the rip off pricing :)

    Here's one DIY calibration guide for ACC. In finnish but with Google it will be understandable. And there's pictures :)...
  18. Is this a fact based price or gut feeling price?...

    Is this a fact based price or gut feeling price? Adjustment in Finland (and Finland is really expensive country) is around 150 . So I'm having a really hard time swallowing that it would be $500+ in...
  19. Problem is that he does not have the FeC. If OP...

    Problem is that he does not have the FeC. If OP wants to enable CCS, a CCS kit needs to be purchased from authorized dealer. They will then code the CCS and activate it online with the one-time use...
  20. New autoscan with retrofitted SWA3.0, side...

    New autoscan with retrofitted SWA3.0, side assist. Also door reflectors replaced with warning lights and coded to door control modules naturally.



    Thursday,08,August,2019,19:28:00:18632
    VCDS...
  21. Hmm.. Camera needs to be upgraded to G at least....

    Hmm.. Camera needs to be upgraded to G at least. I think that was the first one to support TJA. Not sure if ACC had to support that as well. Emergency assist needs ACC support but TJA I'm not sure if...
  22. Ahaa, you mean in Passat's case NAR versions?...

    Ahaa, you mean in Passat's case NAR versions? That explains it :)
  23. Why did you leave the header part out. Usually...

    Why did you leave the header part out. Usually FULL, UNEDITED autoscan. You can hide the registration but otherwise don't add or remove anything from the autoscan.
  24. Maybe I'm stupid or something but I just couldn't...

    Maybe I'm stupid or something but I just couldn't find 3Q0 camera for B7. Looking at year 2015 where it changes from B7 to B8. B7 may has 3AA980654 camera, B8 from May has 3Q0980654. 3C-F100 (B7) and...
  25. Most likely but I would guess all the necessary...

    Most likely but I would guess all the necessary wiring should be there still. VW does not change the basics in the cars that much between platforms.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4