Search:

Type: Posts; User: Vasco Ferraz

Page 1 of 8 1 2 3 4

Search: Search took 0.02 seconds.

  1. Just to report that filled the tank, the gauge...

    Just to report that filled the tank, the gauge went to maximum, I made 120 km without issues which means that I was not running on the fuel which I poured into the fuel filter reservoir.

    So, this...
  2. Thanks Dana

    Thanks Dana
  3. Correct. PD engines have other 2 pumps one on the...

    Correct. PD engines have other 2 pumps one on the fuel tank and the tandem pump but none reaches the pressure to ignite diesel.

    This high pressure is achieve at the unit injector which can rise...
  4. ^ So this is why when read/ear high pressure pump...

    ^ So this is why when read/ear high pressure pump it must be one of these 3 types of pumps.

    Pinpointdiag shares my opinion.
  5. Jack, In my opinion there are 3 types of high...

    Jack,

    In my opinion there are 3 types of high pressure diesel pumps:

    - Mechanical diesel pump used on the first diesel vehicles.
    - High pressure pump used on the common rail diesel vehicles....
  6. Thank you all :) What I did was: 1 -...

    Thank you all :)

    What I did was:

    1 - Disconnected the diesel hose that supplies fuel to the tandem pump.

    2 - I used VCDS to purge and lots of fuel comes out.

    3 - Now what?
  7. Hi Pinpointdiag, Hi Jack, I believe that...

    Hi Pinpointdiag,

    Hi Jack,

    I believe that Pinpointdiag is right, that is, PD engines does not have any high pressure fuel pump.

    The high pressure is done at each unit injector (something...
  8. Jack, Thank you so much for your help :) ...

    Jack,

    Thank you so much for your help :)

    What I was trying to say is that I believe that I ran out of fuel... drying all the lines.

    I don't have such tools :|

    My idea is to:
  9. Jack, Are you sure that this can't be a fuel...

    Jack,

    Are you sure that this can't be a fuel air lock?

    I am not 100% sure but I always do a trip reset at each fuel filling (always full filling).

    At 100/110km/h, I do 1100km per deposit...
  10. This is a PD engine: "Note to PD (pumpe duese...

    This is a PD engine:
    "Note to PD (pumpe duese aka unit injectors) and CR (common rail) owners: The timing in PD and CR engines is determined electronically by the ECU. There is neither a need nor...
  11. I changed the distribution 23000km ago. But it...

    I changed the distribution 23000km ago. But it was done by a Bosch Car Service with Bosch material.
    I didn't do a compression test.
  12. Hi Jack, Yes, I observe the G28 about 300rpm....

    Hi Jack,

    Yes, I observe the G28 about 300rpm. I won't find the G40 in the blocks.

    This is diesel so I am not sure if I should use starting fluid on diesel engines.
  13. When cracking, after several seconds I get the...

    When cracking, after several seconds I get the low oil pressure warning.

    First I ignored, but then the I checked the oil sensor level and it's 0.0mm ^^!

    Checked visual and it's in fact very low...
  14. Golf mk5 2008 diesel cranks but won't start

    Hi,

    My car cranks but won't start.

    Fuel level is about half but the fuel filter reservoir is empty.

    So, I believe that the fuel sender might be broken and I might have ran out of fuel.

    I...
  15. VCIConfig says that RODs are up to date. ...

    VCIConfig says that RODs are up to date.

    Should I change the channel to beta?

    Thanks.
  16. Hi Uwe, Says it is updated.

    Hi Uwe,

    Says it is updated.
  17. Can't dowload ASAM using mobile application

    Hi :)

    While trying to scan the following car using the mobile application, for the engine module, the ASAM download goes looping over and over.

    Is there something that I am doing wrong?


    ...
  18. I only realised that yesterday and as I changed...

    I only realised that yesterday and as I changed mobile (yesterday) I was like:

    "VCDS mobile doesn't show on the Google App Store! Does this means that my phone is not compatible with VCDS mobile?".
  19. Replies
    16
    Views
    1,021

    Hi Jack, I am almost sure that the splines of...

    Hi Jack,

    I am almost sure that the splines of that plate are made of aluminium and the compressor shaft is made of steel, so, I think that plate acts as a fuse in case of the compressor slows down...
  20. Replies
    16
    Views
    1,021

    Just to report that I replaced that plate and the...

    Just to report that I replaced that plate and the AC is working. I drove 60km without any issue or strange noises.

    500€ job versus 15€ for the part, 10€ for the shipping and those first 25€ for...
  21. Replies
    16
    Views
    1,021

    Check this video. This is what I suspect that...

    Check this video. This is what I suspect that happened to my compressor.

    https://youtu.be/kkJtjgLTa8M

    https://www.youtube.com/watch?v=kkJtjgLTa8M

    Read the description to understand why this...
  22. Replies
    16
    Views
    1,021

    Hi, I did not understand what you mean. Are...

    Hi,

    I did not understand what you mean.

    Are you saying that the plate (being a clutch or not) got the spline worned because a seized compressor?

    Bosch Car Service told me that the compressor...
  23. Replies
    16
    Views
    1,021

    I am again back on the game. Today I went to a...

    I am again back on the game.

    Today I went to a "Bosch Car Service" for a diagnose and the problem is the clutch plate.

    https://i.ibb.co/gZHynXF/IMG-20190502-205636.jpg

    The inside of the...
  24. Replies
    16
    Views
    1,021

    Thanks :) As suspected, this is out of my...

    Thanks :)

    As suspected, this is out of my league... that is, I don't know the procedures to remove, store and recycle the gas.

    Also, I don't have professional equipment to refill it.

    So,...
  25. Replies
    16
    Views
    1,021

    Confirmed! The centre bolt of the pulley is not...

    Confirmed! The centre bolt of the pulley is not spinning.
Results 1 to 25 of 187
Page 1 of 8 1 2 3 4